車床床頭I軸軸承座的鉆φ5長斜孔夾具設計及機械加工工藝裝備含7張CAD圖

車床床頭I軸軸承座的鉆φ5長斜孔夾具設計及機械加工工藝裝備含7張CAD圖,車床,床頭,軸承,長斜孔,夾具,設計,機械,加工,工藝,裝備,設備,cad 摘 要 本設計是CA6140床頭I軸軸承座零件的加工工藝規程及一些工序的專用夾具設計。CA6140I軸軸承座零件的主要加工表面是平面及孔。一般來說，保證平面的加工精度要比保證孔的加工精度容易。因此，本設計遵循先面后孔的原則。并將孔與平面的加工明確劃分成粗加工和精加工階段以保證孔的加工精度?；鶞?zhǔn)的選擇以I軸軸承座外圓面作為粗基準。先將底面加工出來，然后作為定位基準，在以底面作為精基準加工孔。整個加工過程選用數控機床。在夾具方面選用專用夾具?？紤]到零件的結構尺寸簡單，夾緊方式多采用手動夾緊，夾緊簡單，機構設計簡單，且能滿足設計要求。 關鍵詞 加工工藝，夾具，定位，夾緊 I Abstract This paper is to design the craft processes of making the CA6140 lever spare parts and some specialized tongs in the process. The CA6140 lever spare part primarily processes the surface and bores. Generally speaking, to guarantee the accuracy of the flat surface process is easier than that of the bore. Therefore, this design follows the principle that surface first and then the bore, and definitely divides the process of flat surface and bore into coarse processes and precise processes to guarantee the bore processes. The basic choice is to consider 45 outside circle as rough basis and to consider 25 bore and its next surface as precise basis. The bottom is first processed out to be fixed position basis, and process the bore using the bottom as the precise basis. The whole processes choose the machine bed. In the aspects of tongs choosing, specialized tongs are used. In consideration of the simple construction size of the spare parts, clipping by hands is adopted. It is simple, and the organization design is simple, and can satisfy the design request. Key Words craft proces , tongs, fixed position, tight clip Ⅱ