301 銷盤式高溫高速摩擦磨損試驗機的設計

301 銷盤式高溫高速摩擦磨損試驗機的設計,銷盤式,高溫,高速,摩擦,磨擦,磨損,試驗,實驗,設計 摘 要I摘 要高溫高速摩擦磨損試驗機是進行高溫高速摩擦磨損試驗的有效設備，廣泛運用于對各種高速刀具的高溫摩擦磨損性能進行測試和評價，是高速切削和新型刀具材料研制開發和應用的必備設備。本論文介紹了摩擦磨損試驗機的基本知識和國內外發展概況，對摩擦磨損試驗機的分類和特點進行了分析，介紹了銷盤式摩擦磨損試驗機的原理。之后對于銷盤式高溫高速摩擦磨損試驗機的整體結構給出了四種不同的設計方案，并對這四種方案進行了分析比較，得到了較為合理的一種方案。并且根據這種較為合理方案對試驗機的整體機械結構進行了相關計算和結構設計，用 ProE 軟件完成試驗機的三維總裝圖。最后得到了整個試驗機的二維裝配圖和摩擦盤、摩擦銷等重要組成部件的裝配圖。關鍵詞 摩擦磨損；試驗機；機械結構；ProEIIABSTRCSTIIIABSTRACTHigh-temperature high-speed friction and wear testing machine is a effective equipment for the high-temperature high-speed friction and wear testing , and it is widely used for various high-speed tools for the friction and wear properties of high-temperature test and evaluation .It is a essential equipment for the research , development and application of new type of high-speed cutting tool materials.The basic knowledge of the friction and wear testing machine and the development at home and abroad are introduced in this paper,and the classification and characteristics of the friction and wear testing machine are also analysed ,and the principle of a kind of dowel-on-disc type friction and wear testing machine is also introduced. Then four different design options of the overall structure of the high temperature high-speed owel-on-disc type friction and wear testing machine are given , then a more reasonable option is got after the analysing and comparing of the four options. And the relevant calculations and structural designs of the testing machine's overall mechanical structure are based on this options . The ProE software is used to complete the testing machine’s 3D assembly plans . Finally the 2D assembly of the testing machine and friction disc, friction dowel, and other important components of the assembly are also drawn.Keywords: friction and wear ; testing machine ; mechanical structure ; ProE