基于ProE的齒輪油泵三維建模的設計

基于ProE的齒輪油泵三維建模的設計,基于,proe,齒輪,油泵,三維,建模,設計 本科畢業論文（設計） 相關中英文翻譯資料 資料題目：計算機輔助設計與制造 學生姓名： 所在院系：機電學院 所學專業：機電技術教育 CAD and CAM The engine lathe, one of the oldest metal removal machines, has a number of useful and highly desirable attributes. Today these lathes are used primarily in small shops where smaller quantities rather than large production runs are encountered. In the beginning, CAD systems were no more than a graphics editor with some built-in design symbols. The geometry available to the user was limited to lines, circular arcs, and the combination of them. The development of free-form curves and surfaces, such as Coon’s patch, Bezier’s patch, and B-spline, enables a CAD systems allow a designer to move into the third dimension. Because a three-dimensional model contains enough information for NC cutter-path programming, the linkage between CAD and NC can be developed. So called turnkey CAD/CAM systems were developed based on this concept and became popular in the 1970s and 1980s. The 1970s marked the beginning of a new era in CAD – the invention of three-dimensional solid modeling. In the past, three-dimensional, wire-frame models represented an object only by its bounding edges. They are ambiguous in the sense that several interpretations might be possible for a single model. There is also no way to find the volumetric information of a model. Solid models contain complete information; therefore, not only can they be used to produce engineering drawing, but engineering analysis can be performed on the same model as well. Later, many commercial systems and research systems were developed. Quite a few of these systems were based on the PADL and BUILD systems. Although they are powerful in representation, many deficiencies still exist. For example, such systems have extreme computation and resource (memory) requirements, an unconventional way of modeling objects and a lack of tolerance capability have all hindered CAD applications. It was not until the mid-1980s that solid modelers made their way into the design environment. Today, their use is as common as drafting and wire-frame model application. CAD implementations on personal computers (PCs) have brought CAD to the masses. This development has made CAD available and affordable. CAD originally was a tool used only by aerospace and other major industrial corporation. The introduction of PC CAD packages, such as AutoCAD, VersaCAD, CADKEY systems, made small companies, even individuals, own and use CAD. By 1988, more than 100,000 PC CAD Packages had been sold. Today, PC-based solid modelers are available and are becoming increasingly popular. Because rapid developments in microcomputers have enabled PCs to carry the heavy computational load necessary for solid modeling, many solid graphics user interface (GUI) , CAD systems can be ported easily from one computer to another, most major CAD systems are able to run on a variety of platforms. There is little difference between mainframe, workstation, and PC-based CAD systems. When a design has frozen, manufacturing can begin. Computers have an important role to play in many aspects of production. Numerically controlled (NC) machine tools need a part program to define the components being made; computer techniques exist to assist, and in some cases virtually automate the generation of part programs. Modern shipbuilding fabricates structures from welded steel plates that are cut from a large steel sheet. Computer-controlled flame cutters are often used for this task and the computer is used to calculate the optimum layout of the components to minimize waste metal. Printed circuit board assembly can also be improved by computer methods. Quality is maintained by computer-controlled automatic test equipment that diagnoses faults in a particular board and rejects defective boards from the assembly line. Computers are used extensively to plot the artwork used to etch printed circuit boards and also to produce part programs for NC drilling machines. One of the most important manufacturing functions is stock and production control. If the original design is done on a computer, obtaining lists of material requirements is straightforward. Standard computer data processing methods are employed to organize the work flow and order components when required. Part geometry requires calculation of a large number of tool positions. Part programming software is usually incorporated into a family of CAM (Computer Aided Manufacturing) software. Some CAM software is associated with CAD (Computer Aided Design) software into CAD/CAM stations. Then the CAM software can use the CAD files as a source of data, which speeds up the programming process. Part programming software is user-friendly, meaning that the programmer does not have to know the computer programming language or its operating system. It uses screen menus to lead the user through the programming process. Data can be entered via the keyboard, the mouse, or the function keys. Experienced programmers can use built-in macro capabilities and advanced techniques such as a family of parts to become even more productive. Programming software has a dynamic graphics database to hold the actual machining sequences. These sequences can be viewed, edited, chained, or deleted. The programming can be accomplished whether single cuts or CNC machine canned cycle will be used. The software will also automatically calculate the proper feeds and speeds to be used during the machining, create a tooling list, and define the tool path. Programmers can use different layers to associate with each profile being created or to construct clamps and fixtures to get a complete picture of the part setup. The tool motion can be seen as it will occur at the machine. Using part programming software, the programmer can easily solve trigonometry problems to define an accurate tool path. When the program is done, the programmer can send it from the PC to the machine via a communication channel using built-in software with communications capability. Good part programming software is capable of: （1）Establishing the machining parameters and tooling for a particular machine or job. （2）Defining the geometry and tool path. （3）Code generation, enabling the programmer to use standard communications protocols or create his or her own.  計算機輔助設計及制造 在講述CAD的基本原理之前，先說說它的簡史是比較合適的。CAD是計算機時代的產品。它從早期的計算機繪圖系統發展到現在的交互式計算機圖形學。兩個這樣的系統包括：麻省理工學院的Sage Project及Sketchpad。Sage Project旨在開發CRT顯示器及操作系統。Sketchpad是在 Sage Project下發展起來的。CRT顯示和光筆輸入用于與系統進行交互操作。 CAD與初次出現的NC和APT（自動編程工具）碰巧同時問世。后來，X—Y繪圖儀作為計算機繪圖的標準拷貝輸出裝置使用。一個有趣的現象是X—Y繪圖儀與NC鉆床具有相同的基本結構，除啦繪圖筆被NC機床上的主軸的刀具代替之外。 開始，CAD系統僅僅是一個帶有內置設計符號的繪圖編輯器。供用戶使用的幾何元素只有直線、圓弧以及兩者的組合。自由曲線及曲面的發展，如昆氏嵌面、貝賽爾嵌面以及B樣條曲線，使得CAD可用于復雜曲線與曲面設計。三維CAD設計允許設計者進入三維設計空間。由于一個三維模型包含啦NC刀具路徑編程所需要的足夠信息，所以能夠開發CAD與NC之間聯系的系統。所謂交鑰匙的CAD/CAM系統便是根據這一概念開發的，并從20世紀70年代至80年代流行起來。 20世紀70年代末，三維實體建模的發明標志著CAD一個新時代的開始。過去的三維線框模型僅用其邊界來表達一個物體。這在某種意義上是含糊的，一個簡單的模型可能有幾種解釋。同時也無法獲得一個模型的體積信息。實體模型包含完整的信息，因此，他們不僅可用于生成工程圖，而且也可在同一模型上完成工程分析。后來，開發了許多商業系統和研究系統。這些系統中相當多的是基于PADL和BUICD系統。盡管他們在表達上是強有力的，但仍然存在許多缺陷。例如，這種系統要有極強的計算能力和內存需求，非常規的物體建模實體建模開始介入設計環境。今天實體建模的應用如同繪圖和線框模型應用一樣普遍。 在個人計算機上，CAD已走向大眾化。這種發展使CAD應用面廣并且很經濟。CAD原本作為一種工具僅被航空和其它主要工業企業使用。諸如AutoCAD，VersaCAD，CADKEY等個人機CAD軟件包的引入，使小型公司乃至個人可以擁有并使用CAD系統。到1988年為止已銷售10萬個以上的PCCAD軟件包。今天，基于個人計算機的迅速發展使得個人計算機的實體建模的PCCAD易于獲得，并且銷售變得更為普及。由于微型計算機的迅速發展使得個人計算機能夠承受實體模型需要的大量計算負荷，所以如今許多實體模型在PC機上運行，并且作為平臺已不成問題。隨著標準圖形用戶界面的發展CAD系統可以很容易的從一臺計算機向另一臺計算機傳送，大多數CAD系統都能夠在不同的平臺上運行。在大型計算機、工作站和基于個人計算機的CAD系統之間幾乎沒有區別。 當設計確定之后，制造才能開始。計算機在生產的許多方面扮演者一個重要角色。數控機床需要一個零件程序來表達被加工零件；計算機技術起到輔助作用，在謀些情況下實質上是自動生產零件加工程序?，F(xiàn)代造船是用從大張鋼板上切下并焊接鋼板來制造船體結構的。計算機控制的火焰切割機經常用于此項任務，而且計算機用于計算最佳排料，已是邊角廢料最少。 印刷電路板裝配過程也可以通過計算機方法加以改進。質量是由計算機控制的自動檢測裝置來保證的，該裝置能在裝配線上檢測到某個有缺陷的板子，并且能從裝配線上刪除。計算機廣泛用于繪制蝕刻到印刷電路板上的布線圖，并且生成數控鉆床所需的零件程序。 最重要的功能之一是庫存和生產控制。如果原始設計是在計算機上進行的，則獲取材料需求清單則是直截了當?shù)?。?biāo)準的計算機數據處理方法是用于組織這項工作流程，并且按需訂購零件。 零件的幾何形狀需要計算大量刀位。零件編程軟件通常是并入一個計算機輔助制造軟件包中的。一些計算機輔助制造軟件與計算機輔助設計軟件合并成計算機輔助設計與制作工作站。計算機輔助制造軟件可使用計算機輔助設計文件作為數據源，這樣加快啦編程的進程。 零件編程軟件是一個用戶界面友好的軟件，這意味著程序員不必懂的計算機編程語言或它的操作系統。它用屏幕菜單引導使用者完成編程過程。數據可通過鍵盤、鼠標或功能鍵輸入。有經驗的程序員可使用計算機巨大的內置內容和諸如系列零件族的先進技術來獲得更高的生產力。 編程軟件有一個動態圖形數據庫來支持實際加工程序。這些程序可被顯示、編輯、串聯或刪除。無論是單一切削還是采用CNC機床固定循環加工，程序都可生成。該軟件也會自動計算加工中所用的適當進給量和切削速度，生產一個刀具清單和定義刀具路徑。程序員為生成的每一個輪廓分配不同的圖層或用另外的圖層加入卡具與夾具獲得一個完整的零件工裝圖?？梢钥吹饺缤跈C床上進行實際加工一樣的刀具運動過程。 使用零件編程軟件，程序員能夠很容易的解決三角學問題，以確定準確的刀具路徑。當一個程序編好后，程序員可以從PC機上通過通信線路用帶有通信能力的內置軟件將程序傳送給數控機床。好的零件編程軟件應具備如下條件： （1）建立加工參數以及用于特殊機床或任務的刀具。 （2）定義幾何模型及刀具路徑。 （3）生成代碼，能讓程序員確定將使用什么代碼以及如何輸出到機床。