MKZ84125軋輥磨床軸承箱體翻轉機構設計【含CAD圖紙】

喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】 ============================================= 喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】 =============================================

編號 無錫太湖學院 畢業設計（論文） 相關資料 題目： MKZ84125軋輥磨床軸承 箱體翻轉機構設計 信機 系 機械工程及自動化專業 學 號： 　　　 0923226　　　　 學生姓名： 吳　 佳 指導教師： 　 尤麗華 （職稱：副教授 ） （職稱： ） 2013年5月25日 目 錄 一、畢業設計（論文）開題報告 二、畢業設計（論文）外文資料翻譯及原文 三、學生“畢業論文（論文）計劃、進度、檢查及落實表” 四、實習鑒定表 無錫太湖學院 畢業設計（論文） 開題報告 題目： MKZ84125軋輥磨床軸承 箱體翻轉機構設計 機械 系 機械工程及自動化 專業 學 號： 0923226 學生姓名： 吳 佳 指導教師： 尤麗華 （職稱：副教授 ） （職稱： ） 2012年11月25日 課題來源 本課題來自于無錫上機磨床有限公司的生產實際。該公司設計生產的自動數控軋輥磨床在磨削工作輥的過程中，兩端的軸承箱體會與砂輪架發生干涉，而頻繁的裝卸軸承箱體則會使加工過程變得繁瑣。為了解決這個問題，本課題要設計一個軋輥磨床翻轉機構，在磨削工作輥時將軸承箱體翻轉90°，既避免了在加工過程中軸承箱體和砂輪架干涉，又保證了加工的效率。 科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等） 十八世紀30年代，為了適應鐘表、自行車、縫紉機和槍械等零件淬硬后的加工，英國、德國和美國分別研制出使用天然磨料砂輪的磨床。這些磨床是在當時現成的機床如車床、刨床等上面加裝磨頭改制而成的，它們結構簡單，剛度低，磨削時易產生振動，要求操作工人要有很高的技藝才能磨出精密的工件。 1876年在巴黎博覽會展出的美國布朗-夏普公司制造的萬能外圓磨床，是首次具有現代磨床基本特征的機械。它的工件頭架和尾座安裝在往復移動的工作臺上，箱形床身提高了機床剛度，并帶有內圓磨削附件。1883年，這家公司制成磨頭裝在立柱上、工作臺作往復移動的平面磨床。 1900年前后，人造磨料的發展和液壓傳動的應用，對磨床的發展有很大的推動作用。隨著近代工業特別是汽車工業的發展，各種不同類型的磨床相繼問世。例如20世紀初，先后研制出加工氣缸體的行星內圓磨床、曲軸磨床、凸輪軸磨床和帶電磁吸盤的活塞環磨床等。 自動測量裝置于1908年開始應用到磨床上。到了1920年前后，無心磨床、雙端面磨床、軋輥磨床、導軌磨床，珩磨機和超精加工機床等相繼制成使用；50年代又出現了可作鏡面磨削的高精度外圓磨床；60年代末又出現了砂輪線速度達60～80米/秒的高速磨床和大切深、緩進給磨削平面磨床；70年代，采用微處理機的數字控制和適應控制等技術在磨床上得到了廣泛的應用。 隨著高精度、高硬度機械零件數量的增加，以及精密鑄造和精密鍛造工藝的發展，磨床的性能、品種和產量都在不斷的提高和增長。 磨床是各類金屬切削機床中品種最多的一類，主要類型有外圓磨床、內圓磨床、平面磨床、無心磨床、工具磨床等。 外圓磨床是使用的最廣泛的，能加工各種圓柱形和圓錐形外表面及軸肩端面的磨床。萬能外圓磨床還帶有內圓磨削附件，可磨削內孔和錐度較大的內、外錐面。不過外圓磨床的自動化程度較低，只適用于中小批單件生產和修配工作。 內圓磨床的砂輪主軸轉速很高，可磨削圓柱、圓錐形內孔表面。普通內圓磨床僅適于單件、小批生產。自動和半自動內圓磨床除工作循環自動進行外，還可在加工中自動測量，大多用于大批量的生產中。 平面磨床的工件一般是夾緊在工作臺上，或靠電磁吸力固定在電磁工作臺上，然后用砂輪的周邊或端面磨削工件平面的磨床；無心磨床通常指無心外圓磨床，即工件不用頂尖或卡盤定心和支承，而以工件被磨削外圓面作定位面，工件位于砂輪和導輪之間，由托板支承，這種磨床的生產效率較高，易于實現自動化，多用在大批量生產中。 工具磨床是專門用于工具制造和刀具刃磨的磨床，有萬能工具磨床、鉆頭刃磨床、拉刀刃磨床、工具曲線磨床等，多用于工具制造廠和機械制造廠的工具車間。 砂帶磨床是以快速運動的砂帶作為磨具，工件由輸送帶支承，效率比其他磨床高數倍，功率消耗僅為其他磨床的幾分之一，主要用于加工大尺寸板材、耐熱難加工材料和大量生產的平面零件等。 專門化磨床是專門磨削某一類零件，如曲軸、凸輪軸、花鍵軸、導軌、葉片、軸承滾道及齒輪和螺紋等的磨床。除以上幾類外，還有珩磨機、研磨機、坐標磨床和鋼坯磨床等多種類型。 由于長期以來對新技術的應用相對滯后，國內機床產品的總體技術水平比之先進國家同類型機床還有著相當大的差距，勞動生產率低下，在國際市場中競爭力不足，經濟效益不高。在國外高檔機床大舉進攻中國市場的情況下，我們只有以積極的姿態面對這一嚴峻的形勢。盡快應用先進的設計技術，能快速開發出結構合理、自動化水平高、加工精度高、低振動、低成本的機床新產品響應市場，我國的機床工業才有出路。為了達到這一目的，掌握先進的機床設計方法就顯得尤為重要。我國機床工業的竟爭能力的提高也就取決于機床新品的開發和關鍵技術的研究、掌握、應用和迅速推廣。隨著我國加入世界貿易組織和全球經濟一體化環境的形成，機床行業的市場競爭將會愈演愈烈。目前，國內外機床產品技術水平之間的差距仍然很大，主要表現為:產品仿制多，創新少，市場競爭力不足，利潤低:設計方法落后，機床結構設計，尚處于傳統的經驗、靜態、類比的設計階段，很少考慮結構動、靜態特性對機床產品性能產生的影響，產品精度低，質量難以保證;設計周期長，成功率低，反復設計、試制與修改，產品更新?lián)Q代慢，且成本高。 研究內容 軋輥磨床為金屬切削機床，由床身、頭架、尾架、托架、縱橫拖板、磨頭、測量架及電氣數控系統組成，分為承載系統、驅動系統、磨削系統、測量系統和控制系統五個子系統。工件由頭架、尾架和托架支撐，并由頭架驅動旋轉。數控系統根據軋輥表面母線的數學模型，控制機床作多軸復合運動，在運動過程中實現砂輪對輥面金屬的磨削。在線測量系統實時地將測量數據反饋給磨床控制系統，并由控制系統對機床出閉環控制，從而完成對工件的精密加工。 床身：采用砂輪床身與工件床身分離的結構。床身調整墊鐵間距短，剛性強，床身精度不易變化。砂輪床身為大約為1200mm導軌間距的寬體床身，配備的伸縮式不銹鋼防護罩保證永不生銹，安裝在砂輪床身內的精密滾珠絲桿，用于驅動大拖板(Z軸)。 頭架：采用三級三角皮帶傳動保證了傳動的平穩和精度；使用交流主軸電機驅動能使頭架實現正向和反向旋轉；頭架的位置控制功能，可實現撥盤角度自動定位，方便軋輥的吊裝，減少輔助時間。頭架潤滑系統選用了油脂泵，可實現自動定時給油。 尾架：移動采用電動驅動方式，液壓自動鎖緊。尾架配備大行程(1000mm)液壓套筒。 砂輪主軸系統：前后徑后軸承均采用高精度動靜壓軸承，主軸軸向采用高精度推力軸承。另外，在后軸承設計中增強了工作腔動靜壓軸承的靜態壓力效果，以克服較大皮帶拉力對軸瓦造成的損傷。主軸動靜壓軸承具有回轉精度高，穩定性好，動態剛性強，不易振動等特點。 磨架及其進給機構：磨架采用單層整體結構，具有很高的剛性，磨架導軌為貼塑靜壓導軌，磨架進給機構由帶減速裝置的西門子交流伺服電機和經過精確預拉伸的精密滾珠絲桿副組成，具有很高的進給精度和靈敏度。 拖板(Z軸)：拖板采用V-平形形式的貼塑靜壓導軌，拖板進給機構由帶減速裝置的西門子交流伺服電機和經過精確預拉伸精密滾珠絲桿副組成，由數控系統通過交流伺服電機和圓光柵實現拖板的閉環位置控制。拖板采用滾珠絲桿傳動，與國內外同類磨床所采用的傳統齒輪齒條傳動相比，具有機械傳動鏈短、運動平穩、傳動精度高、間隙小等優點。 頭架控制系統：頭架采用西門子1PH7型交流主軸電機驅動，內裝西門子Sine/Cos1Vpp，2048 S/R光電編碼器，完成頭架速度及位置的閉環控制。頭架可實現正向和反向旋轉以及撥盤角度自動定位。交流主軸電機的采用使頭架電機的維護工作量大大減少。針對軋輥驅動的特點頭架采用了低額定轉速、大啟動扭矩的交流主軸電機，在保證重型軋輥啟動需要的同時節約寶貴的能源。 砂輪控制系統：砂輪采用西門子1PH7型交流主軸電機驅動，內裝西門子Sine/Cos1Vpp,2048 S/R光電編碼器，完成砂輪速度及位置的閉環控制。砂輪可實現正向和反向旋轉以及角度自動定位。另外，交流主軸電機的采用極大地方便了砂輪電機的維護。砂輪采用了高達100KW的交流主軸電機，保證了磨床具有強力磨削能力，滿足用戶的軋輥快速大負荷加工要求。 電氣控制柜及柜內配電系統和控制元件：為保證磨床電氣系統的整體可靠性，從電氣控制柜箱殼到柜內的配電系統以及保護元件、開關元件、控制元件全部采用進口的國際名牌產品(西門子、威圖)。 擬采取的研究方法、技術路線、實驗方案及可行性分析 通過對MKZ84125自動數控軋輥磨床實地考察，總結得出該磨床的基本結構，工作方式與原理，然后根據考察的結果，再查閱相關書籍后對其進行整體設計的基礎，再根據上機磨床廠給定的關于機床的尺寸參數，翻箱動作的具體要求以及大連重工集團有限公司設計的待加工工作輥的相關資料，對在MKZ84125自動數控軋輥磨床上使用的翻箱機構進行設計，進行初步設計。交由指導老師檢查，修改。完成后，再對主要載荷部件進行校核。最后出主要零件的零件圖，編寫設計說明書。 可行性分析：軋輥磨床通常是用來磨削工作輥的。由于工作輥在使用過程中磨損較快，平均兩到三個小時就要進行修整磨削，否則將達不到所要求的加工精度，所以軋輥磨床除用于在加工工作輥時來磨削工作輥外，還需要在生產中用于對工作輥進行頻繁的修磨。當軋輥磨床用于加工工作輥時，工作輥是在沒有和其兩端的軸承箱體進行裝配的情況下，單獨在磨床上進行磨削的。而工作輥在使用中兩端會裝配有軸承箱體，如果對工作輥進行帶箱磨削，則由于軸承箱體的結構和存在一定的偏心，在重力作用下擺放的自然位置會和砂輪架發生干涉，使工作輥的工作表面不能得到完整的修磨。因此對工作輥進行修磨前要將軸承箱體拆卸下來，需要耗費大量的時間和人力。由此可見，該課題方案切實可行。 研究計劃 對于本課題,初步確定按以下步驟進行： （1）應先通過查找文獻了解機床的基本結構，熟悉機床的具體工作原理； （2）完成整機的總體布局設計，并繪制相應的二維圖紙； （3）完成翻箱機構的設計，繪制相應的二維裝配圖； （4）完成部分零件圖設計。 預期成果 由于工作輥在使用過程中磨損較快，平均兩到三個小時就要進行修整磨削，否則將達不到所要求的加工精度，所以軋輥磨床除用于在加工工作輥時來磨削工作輥外，還需要在生產中用于對工作輥進行頻繁的修磨。 當軋輥磨床用于加工工作輥時，工作輥是在沒有和其兩端的軸承箱體進行裝配的情況下，單獨在磨床上進行磨削的。而工作輥在使用中兩端會裝配有軸承箱體，如果對工作輥進行帶箱磨削，則由于軸承箱體的結構和存在一定的偏心，在重力作用下擺放的自然位置會和砂輪架發生干涉，使工作輥的工作表面不能得到完整的修磨。因此對工作輥進行修磨前要將軸承箱體拆卸下來，需要耗費大量的時間和人力。 通過對該自動數控軋輥磨床上使用的翻箱機構進行設計，實現在磨削前將軸承箱體從自然位置翻轉一定的角度，使其在磨削過程中不再和砂輪架發生干涉，從而實現帶箱磨削，可大大提高用戶在生產中的效率。 已具備的條件和尚需解決的問題 ① 設計過程中所需要的各種軟硬件資源和相關產品實物照片。 ② 相關文獻資料的缺乏，對一些結構設計部分的具體設計指導，以及一些裝配尺寸的確定。 指導教師意見 指導老師簽名： 年 月 日 教研室（學科組、研究所）意見 教研室主任簽名： 年 月 日 系意見 教研室主任簽名： 年 月 日 Fundamentals of Mechanical Design Mechanical design means the design of things and systems of a mechanical nature—machines, products, structures, devices, and instruments. For the most part mechanical design utilizes mathematics, the materials sciences, and the engineering-mechanics sciences. The total design process is of interest to us. How does it begin? Does the engineer simply sit down at his desk with a blank sheet of paper? And, as he jots down some ideas, what happens next? What factors influence or control the decisions which have to be made? Finally, then, how does this design process end? Sometimes, but not always, design begins when an engineer recognizes a need and decides to do something about it. Recognition of the need and phrasing it in so many words often constitute a highly creative act because the need may be only a vague discontent, a feeling of uneasiness, of a sensing that something is not right. The need is usually not evident at all. For example, the need to do something about a food-packaging machine may be indicated by the noise level, by the variations in package weight, and by slight but perceptible variations in the quality of the packaging or wrap. There is a distinct difference between the statement of the need and the identification of the problem. Which follows this statement? The problem is more specific. If the need is for cleaner air, the problem might be that of reducing the dust discharge from power-plant stacks, or reducing the quantity of irritants from automotive exhausts. Definition of the problem must include all the specifications for the thing that is to be designed. The specifications are the input and output quantities, the characteristics of the space the thing must occupy and all the limitations on these quantities. We can regard the thing to be designed as something in a black box. In this case we must specify the inputs and outputs of the box together with their characteristics and limitations. The specifications define the cost, the number to be manufactured, the expected life, the range, the operating temperature, and the reliability. There are many implied specifications which result either from the designer's particular environment or from the nature of the problem itself. The manufacturing processes which are available, together with the facilities of a certain plant, constitute restrictions on a designer's freedom, and hence are a part of the implied specifications. A small plant, for instance, may not own cold-working machinery. Knowing this, the designer selects other metal-processing methods which can be performed in the plant. The labor skills available and the competitive situation also constitute implied specifications. After the problem has been defined and a set of written and implied specifications has been obtained, the next step in design is the synthesis of an optimum solution. Now synthesis cannot take place without both analysis and optimization because the system under design must be analyzed to determine whether the performance complies with the specifications. The design is an iterative process in which we proceed through several steps, evaluate the results, and then return to an earlier phase of the procedure. Thus we may synthesize several components of a system, analyze and optimize them, and return to synthesis to see what effect this has on the remaining parts of the system. Both analysis and optimization require that we construct or devise abstract models of the system which will admit some form of mathematical analysis. We call these models mathematical models. In creating them it is our hope that we can find one which will simulate the real physical system very well. Evaluation is a significant phase of the total design process. Evaluation is the final proof of a successful design, which usually involves the testing of a prototype in the laboratory. Here we wish to discover if the design really satisfies the need or needs. Is it reliable? Will it compete successfully with similar products? Is it economical to manufacture and to use? Is it easily maintained and adjusted? Can a profit be made from its sale or use? Communicating the design to others is the final, vital step in the design process. Undoubtedly many great designs, inventions, and creative works have been lost to mankind simply because the originators were unable or unwilling to explain their accomplishments to others. Presentation is a selling job. The engineer, when presenting a new solution to administrative, management, or supervisory persons, is attempting to sell or to prove to them that this solution is a better one. Unless this can be done successfully, the time and effort spent on obtaining the solution have been largely wasted. Basically, there are only three means of communication available to us. There are the written, the oral, and the graphical forms. Therefore the successful engineer will be technically competent and versatile in all three forms of communication. A technically competent person who lacks ability in any one of these forms is severely handicapped. If ability in all three forms is lacking, no one will ever know how competent that person is! The competent engineer should not be afraid of the possibility of not succeeding in a presentation. In fact, occasional failure should be expected because failure or criticism seems to accompany every really creative idea. There is a great to be learned from a failure, and the greatest gains are obtained by those willing to risk defeat. In the find analysis, the real failure would lie in deciding not to make the presentation at all. Introduction to Machine Design Machine design is the application of science and technology to devise new or improved products for the purpose of satisfying human needs. It is a vast field of engineering technology which not only concerns itself with the original conception of the product in terms of its size, shape and construction details, but also considers the various factors involved in the manufacture, marketing and use of the product. People who perform the various functions of machine design are typically called designers, or design engineers. Machine design is basically a creative activity. However, in addition to being innovative, a design engineer must also have a solid background in the areas of mechanical drawing, kinematics, dynamics, materials engineering, strength of materials and manufacturing processes. As stated previously, the purpose of machine design is to produce a product which will serve a need for man. Inventions, discoveries and scientific knowledge by themselves do not necessarily benefit people; only if they are incorporated into a designed product will a benefit be derived. It should be recognized, therefore, that a human need must be identified before a particular product is designed. Machine design should be considered to be an opportunity to use innovative talents to envision a design of a product is to be manufactured. It is important to understand the fundamentals of engineering rather than memorize mere facts and equations. There are no facts or equations which alone can be used to provide all the correct decisions to produce a good design. On the other hand, any calculations made must be done with the utmost care and precision. For example, if a decimal point is misplaced, an otherwise acceptable design may not function. Good designs require trying new ideas and being willing to take a certain amount of risk, knowing that is the new idea does not work the existing method can be reinstated. Thus a designer must have patience, since there is no assurance of success for the time and effort expended. Creating a completely new design generally requires that many old and well-established methods be thrust aside. This is not easy since many people cling to familiar ideas, techniques and attitudes. A design engineer should constantly search for ways to improve an existing product and must decide what old, proven concepts should be used and what new, untried ideas should be incorporated. New designs generally have “bugs” or unforeseen problems which must be worked out before the superior characteristics of the new designs can be enjoyed. Thus there is a chance for a superior product, but only at higher risk. It should be emphasized that if a design does not warrant radical new methods, such methods should not be applied merely for the sake of change. During the beginning stages of design, creativity should be allowed to flourish without a great number of constraints. Even though many impractical ideas may arise, it is usually easy to eliminate them in the early stages of design before firm details are required by manufacturing. In this way, innovative ideas are not inhibited. Quite often, more than one design is developed, up to the point where they can be compared against each other. It is entirely possible that the design which ultimately accepted will use ideas existing in one of the rejected designs that did not show as much overall promise. Psychologists frequently talk about trying to fit people to the machines they operate. It is essentially the responsibility of the design engineer to strive to fit machines to people. This is not an easy task, since there is really no average person for which certain operating dimensions and procedures are optimum. Another important point which should be recognized is that a design engineer must be able to communicate ideas to other people if they are to be incorporated. Initially the designer must communicate a preliminary design to get management approval. This is usually done by verbal discussions in conjunction with drawing layouts and written material. To communicate effectively, the following questions must be answered: (1) Does the design really serve a human need? (2) Will it be competitive with existing products of rival companies? (3) Is it economical to produce? (4) Can it be readily maintained? (5) Will it sell and make a profit? Only time will provide the true answers to the preceding questions, but the product should be designed, manufactured and marketed only with initial affirmative answers. The design engineer also must communicate the finalized design to manufacturing through the use of detail and assembly drawings. Quite often, a problem well occur during the manufacturing cycle. It may be that a change is required in the dimensioning or telegramming of a part so that it can be more readily produced. This falls in the category of engineering changes which must be approved by the design engineer so that the product function will not be adversely affected. In other cases, a deficiency in the design may appear during assembly or testing just prior to shipping. These realities simply bear out the fact that design is a living process. There is always a better way to do it and the designer should constantly strive towards finding that better way. Machining Turning The engine lathe, one of the oldest metal removal machines, has a number of useful and highly desirable attributes. Today these lathes are used primarily in small shops where smaller quantities rather than large production runs are encountered. The engine lathe has been replaced in today's production shops by a wide variety of automatic lathes such as automatic of single-point tooling for maximum metal removal, and the use of form tools for finish and accuracy, are now at the designer's fingertips with production speeds on a par with the fastest processing equipment on the scene today. Tolerances for the engine lathe depend primarily on the skill of the operator. The design engineer must be careful in using tolerances of an experimental part that has been produced on the engine lathe by a skilled operator. In redesigning an experimental part for production, economical tolerances should be used. Turret Lathes Production machining equipment must be evaluated now, more than ever before, in terms of ability to repeat accurately and rapidly. Applying this criterion for establishing the production qualification of a specific method, the turret lathe merits a high rating. In designing for low quantities such as 100 or 200 parts, it is most economical to use the turret lathe. In achieving the optimum tolerances possible on the turret lathe, the designer should strive for a minimum of operations. Automatic Screw Machines Generally, automatic screw machines fall into several categories; single-spindle automatics, multiple-spindle automatics and automatic chucking machines. Originally designed for rapid, automatic production of screws and similar threaded parts, the automatic screw machine has long since exceeded the confines of this narrow field, and today plays a vital role in the mass production of a variety of precision parts. Quantities play an important part in the economy of the parts machined on the automatic to set up on the turret lathe than on the automatic screw machine. Quantities less than 1000 parts may be more economical to set up on the turret lathe than on the automatic screw machine. The cost of the parts machined can be reduced if the minimum economical lot size is calculated and the proper machine is selected for these quantities. Automatic Tracer Lathes Since surface roughness depends greatly upon material turned, tooling, and fees and speeds employed, minimum tolerances that can be held on automatic tracer lathes are not necessarily the most economical tolerances. Is some case, tolerances of ±0.05mm are held in continuous production using but one cut. Groove width can be held to ±0.125mm on some parts. Bores and single-point finishes can be held to ±0.0125mm. On high-production runs where maximum output is desirable, a minimum tolerance of ±0.125mm is economical on both diameter and length of turn. Milling With the exceptions of turning and drilling, milling is undoubtedly the most widely used method of removing metal. Well suited and readily adapted to the economical production of any quantity of parts, the almost unlimited versatility of the milling process merits the attention and consideration of designers seriously concerned with the manufacture of their product. As in any other process, parts that have to be milled should be designed with economical tolerances that can be achieved in production milling. If the part is designed with tolerances finer than necessary, additional operations will have to be added to achieve these tolerances——and this wi