罩蓋、盒蓋的注塑模具設計與制造-滑塊抽芯注射模含開題及9張CAD圖

罩蓋、盒蓋的注塑模具設計與制造-滑塊抽芯注射模含開題及9張CAD圖,盒蓋,注塑,模具設計,制造,滑塊抽芯,注射,開題,cad 目 錄 緒論.......................................................1 1.設計前的準備工作.......................................6 1.1 明確設計任務和準備必要的技術條件.....................6 1.2 分析研究原材料的工藝特性和成型性能 ..................6 2.盒蓋注塑模工藝規程的編制..............................8 2.1 模具工藝規程的編制 ..................................8 2.2 根據塑件形狀尺寸，估算塑件體積和重量.................11 3.模腔的選擇與設計......................................14 4.澆注系統設計..........................................14 4.1 主流道設計..........................................14 4.2 分流道設計..........................................15 4.3 冷料井及拉料桿設計..................................16 4.4 澆口設計............................................16 5.分型面的選擇設計.................................18 6.排氣結構的設計...................................19 7.合模導向機構的設計...............................19 8.注射設備的選擇...................................21 9.模架的選擇與設計................................... 22 9.1 特點和用途 .........................................22 9.2 塑料注射模標準模架標準的尺寸組合....................23 9.3 模架的規格系列......................................23 9.4 中小型模架的標記方法................................23 10.頂出脫模機構設計....................................23 10.1 推出脫模機構的選取用原則 ..........................24 10.2 推出脫模機構分類...................................24 10.3 推板推出脫模機構...................................25 11.側抽芯機構的設計....................................26 11.1 設計斜滑塊分型與抽芯機構應注意的問題...............26 11.2 見圖3-88斜導桿導滑的內側分型抽芯機構..............27 11.3 斜滑塊的導滑與組合形式.............................27 12.成型零部件的設計與計算............................ 28 12.1 成型零部件的性能 ..................................29 12.2 凹模的結構設計.....................................29 12.3 凸模的結構設計 ....................................30 12.4 成型零部件工作尺寸計算 ............................30 13.溫調系統設計 ....................................... 32 13.1 模具溫度調節的重要性...............................32 13.2 冷卻系統的設計計算 ................................33 14.繪制模具的總裝圖（見圖紙）.........................33 15.模具的工作原理和動作過程........................33 16.塑料模具的安裝.......................................34 16.1 模具的裝配及調試見下表.............................34 16.2 裝配調試的工藝要求及注意問題.......................35 17.結論..................................................38 17.1 扎實的基礎課，專業課是模具設計的基礎 ..............38 17.2 理論與實踐相結合的重要性...........................38 17.3 對模具設計中的安全性，經濟性加深了認識.............39 17.4 電腦成為設計中重要的輔助工具.......................39 17.5 設計態度直接決定著設計質量.........................39 致謝 .....................................................40 參考文獻.................................................41 附表 模具標準件和非標準件一覽表