螺桿空氣壓縮機的設計含13張CAD圖

螺桿空氣壓縮機的設計含13張CAD圖,螺桿,空氣壓縮機,設計,13,cad 計算機輔助設計的簡要?dú)v史 在我們講述CAD的基本理論之前,先說說他的簡史是比較合適的。CAD是計算機時代的產品.它從早期的計算機繪圖系統發展到現在的交互式計算機圖形學.兩個這樣的系統包括:麻省理工學院的Sage Project及Sketchpad。Sage Project旨在開發CRT顯示器及操作系統. Sketchpad是在Sage Project下發展起來的.CRT顯示和光筆輸入用于與系統進行交互操作.CAD與初次出現的NC和APT(自動編程工具)碰巧同時出世.后來,X-Y繪圖儀作為計算機繪圖的標準硬拷貝輸出裝置使用,一個有趣的現象是X-Y繪圖儀與NC鉆床具有相同的基本機構,除了繪圖筆NC機床上的主軸刀具替代之外。 開始，CAD系統僅僅是一個帶有內置設計符號的繪圖編輯器，供用戶使用的幾何元素只有直線、圓弧、以及兩者的組合。自由曲線及其曲面的發展，如昆氏嵌面、貝塞爾嵌面以及B-樣條曲線，使CAD系統可用于復雜曲線與曲面設計。三維CAD系統允許設計者步入三維設計空間。由于一個三維設計模型包含了NC刀具路徑編程所需的足夠信息，所以能夠開發CAD與NC之間聯系的系統。所謂交鑰匙的CAD/CAM系統便是根據這一概念開發的，并從20世紀70年代至80年代流行起來。 20世紀70年代，三維實體建模的發明標志著CAD一個新時代的開始。過去的三維線框模型僅用其邊界來表達一個物體。這在某種意義上是模糊的，一個簡單的模型可能有幾種解釋。同時也無法獲得一個模型的體積信息。實體模型包含完整的信息，因此，它們不僅可用于生成工程圖，而且也可在同一模型上完成工程分析。后來，開發了許多商業系統和研究系統。這些系統中相當多的是基于PADL和BUILD系統。盡管它們?cè)诒磉_(dá)上是強有力的，但仍然存在許多缺陷。例如，這種系統要有極強的計算能力和內存需求，非常規的物體建模方式以及標注公差能力的缺乏，這一切已阻礙了CAD應用。直到20世紀80年代中期，實體建模開始介入設計環境。今天實體建模的應用如同繪圖和線框模型應用一樣普遍。 在個人計算機上，CAD已走向大眾化。這種發展使CAD應用面廣并且很經濟。CAD原本作為一種工具僅被航空和其它主要工業企業使用。諸如AutoCAD、VersaCAD、CADKEY等個人機CAD軟件包的引入，使小型公司乃至個人可以擁有并使用CAD系統。到1988年為止已銷售10萬個以上的PC CAD軟件包。今天，基于個人計算機的實體建摸的PC CAD易于獲得，并且銷售變得更為普及。由于微型計算機的迅速發展使得個人計算機能夠承受實體模型需要的大量計算負荷，所以如今許多實體模型在PC機上運行，并且作為平臺 已不成為一個問題。隨著標準圖形用戶界面的發展，CAD系統可以很容易地從一臺計算機傳送，大多數CAD系統都能在不同平臺上運行。在大型計算機、工作臺和基于個人計算機的CAD系統之間幾乎沒有區別。 計算機輔助設計的結構 一個CAD系統包含三個主要部分： （1）硬件 計算機及輸入/輸出裝置。 （2）操作系統軟件。 （3）應用軟件 CAD軟件包。 硬件主要用于支持軟件功能。在CAD系統中使用著種類繁多的硬件。操作系統軟件是CAD應用軟件與硬件之間的界面。操作系統軟件管理著硬件運行并提供許多諸如創建 和取消操作任務、控制任務的進程、在任務間分配硬件資源、提供通向軟件資源，如文件、編輯器、編譯和應用程序的通道等基本功能。這不僅對CAD軟件很重要，而且對非CAD軟件也很重要。 應用軟件是CAD系統的核心。它由二維和三維建摸、繪圖、工程分析等程序組成。一個CAD系統的功能便建立在應用軟件中。正是應用軟件使一種CAD軟件包區別于另一種，通常應用軟件是依賴于操作系統的。要把在一個操作系統上運行的CAD系統移到另一個操作系統上，并不像編譯軟件那樣微不足道。因此也必須注意操作系統。 計算機輔助設計 計算機輔助設計給了設計者去嘗試幾個可行的解決方案的能力。通常還需要某些形式的設計分析計算，而為了這一任務已經編寫了許多程序。計算機為設計者對所建議的各種結構設計的分析和為最終設計準備正式繪圖提供了強有力的工具。 在二維繪圖領域中，計算機方法能夠提供比傳統的紙和筆的方法更有意義、更大成本節約的優點，但是一個CAD系統并不僅是一個電子繪圖板。計算機繪圖系統可使設計者設計出既快又準確的圖形，并且很容易修改。在涉及到重復性工作時，會戲劇性產生復制產品，因?yàn)闃?biāo)準圖形只要一次構建成功，就可以從圖庫中取出。剪切和粘貼技術作為節約勞動力的輔助工具被使用。當幾個分項目設計人員從事同一個工程時，要建立中心數據庫，使得由某一個人繪的細節圖可以很容易地合并到其它不同的裝配圖中。中心數據庫也可作為標準參考零件庫使用。 有限元是一項成熟的應力分析技術，它多被土木工程和機械工程所采用。它由將結構劃分成有限個的小單元所組成，并計算每一個單元之間的作用力。如果被分割的單元足夠小，就能對一個結構或?qū)嶓w的內部應力獲得一個好的估計。這些計算機設計慣用于大型結構物的設計，諸如船體、橋梁、飛機機身和海面油井平臺。汽車工業也使用類似的方法來設計和制造車身。 二維繪圖 CAD使多視圖的二維繪圖成為可能，視圖空間可以從微米到米的比例范圍內無限變化。它提供給機械設計師放大的功能，即使在恰當配合的裝配零件中最小的零件也能看清楚，設計程序甚至能自動辨認CAD裝配圖中的潛在問題。針對具有不同特征的零件，如運動的或靜止的，在顯示時可以被指定成不同的顏色。為了有利于工程設計的變化，可使用帶有自動尺寸變化的系統對零件進行尺寸標注。 三維繪圖 隨著三維建模的出現，設計者具有了更多的自由度。他們可以生成三維零件圖并且可以無限制地修改以獲得所需的結果。通過有限元分析，應力加到計算機模型上，并且以圖形化的方式顯示其結果，在產品物理模型真正產生之前，對設計中的任何內在問題給設計者一個快速的反饋。 三維模型可用線框、曲線或?qū)嶓w方式生成。在線框模型中，直線和圓弧構成了模型邊界。結果是一個可以從任何位置觀察的三維模型，但仍只是一個框架形式。創建曲面猶如在骨架上包上皮。一旦這樣生成后，模型就可以被渲染，使得圖形看上去更逼真。曲面模型普遍用于構建板金的展開和重疊以用于制造。 實體模型是最復雜的建模層次，并且用于建立實體模型的程序在一段時期內只用在大型計算機上。只有近年來微型計算機才達到這個能力水平，也可以運行復雜的算法，生成實體模型。計算機“認為”實體模型是一種具有實體質量的模型，所以它可被“鉆孔”“加工”“焊接”，好象它是一個實際的零件。它能夠由任何材料構成并呈現其材料特性，因此，能夠進行質量計算。 計算機輔助繪圖的好處 用計算機完成繪圖及設計任務的好處是令人難忘的：提高速度、提高準確性、減少硬拷貝存儲空間及易于恢復信息、加強信息傳輸能力、改善傳輸質量和便于修改。 速度 工業用計算機能以平均每秒3300萬次完成一項任務；更新的計算機其速度更快。用計算機計算零件的變形量是一個重要功績。當理論上的載荷力加到零件上時、通過計算機進行有限元分析或者在監視器上顯示一個城市的整體規劃時，這兩者都是既費時又計算量大的任務。AutoCAD軟件可根據需要多次復制所需模型的形狀和幾何尺寸，快速自動地進行剖面填充及尺寸標注。 準確 AutoCAD程序依靠操作系統及計算機平臺每點具有14位的精度。這在用數學計算諸如一個圓的線段數、程序必須圓整線段時是十分重要的。 存儲 計算機能夠在物理空間中存儲上千幅圖，這空間能夠存儲上百幅手工圖。而且計算機能夠很容易地搜索和找到一幅圖，只要操作者擁有正確的文件名。 傳輸 由于計算機的數據是以電子形式存儲，它能被送到各種位置。最明顯的位置是監視器。計算機可以在屏幕上以不同的方式顯示數據，如圖形，并能方便地將數據轉換成可讀圖形。這些數據也可被傳送給繪圖機，打印出常見的圖紙，通過直接連接到計算機輔助制造機床或由電話線傳到地球的任何地方。你可以不再冒損失或丟失的危險去郵寄圖紙，現在圖紙可以通過電信網立即發送到目的地。 A Brief History of?。茫粒? Before we present the basics of CAD ,it is appropriate to give a brief history . CAD is a product of the computer era. It originated from early computer graphic systems to the development of interactive computer graphics. Two such systems include the Sage Project at the Massachusetts Institute of Technology (MIT) and Sketchpad. The Sage Project was aimed at developing CRT displays and operating systems. Sketchpad was developed under the Sage Project. A CRT display and light pen input were used to interact with the system. This coincidentally happened at about the same time that NC and APT(Automatically Programmed Tool)first appeared. Later, X-Y plotters were used as the standard hard-copy output device for computer graphics. An interesting note is that an X-Y plotter has the same basic structure as a NC drilling machine except that a pen is substituted for the tool on NC spindle. In the beginning, CAD systems were no more than graphics editor with some built-in design symbols. The geometry available to the user was limited to lines, circular arcs, and the combination of the two. The development of free-form curves and surfaces, such as Coon’s patch, Bezier’s patch, and B-spline, enable a CAD system allow to be used for sophisticated curves and surface design. Three-dimensional CAD system allow a designer to move into the third dimension. Because a three-dimensional model contains enough information for NC cutter-path programming, the linkage between CAD and NC can be developed. So called turnkey CAD/CAM systems were developed based on this concept and became popular in the 1970s and 1980s. The 1970s marked the beginning of a new era in CAD-the invention of three-dimensional solid modeling. In the past, three-dimensional, wire-frame models represented an object only by its bounding edges. They are ambiguous in the sense that several interpretations might be possible for a single model. There is also no way to find the volumetric information of a model. Solid models contain complete information; therefore, not only can they be used to produce engineering drawing, but engineering analysis can be performed on the same model as well. Later many commercial systems and research systems were developed. Quite a few of these systems were based on the PADL and BUILD systems. Although they are powerful in representation, many deficiencies still exist. For example, such systems have extreme computation and resource (memory) requirements, an unconventional way of modeling object and a lack of tolerance capability have all hindered CAD applications. It was not until the mid-1980s that solid modelers made their way into the design environment. Today, their use is as common as drafting and wire-frame model applications. CAD implementations on personal computers (PCs) have brought CAD to the masses. This development has made CAD available and affordable. CAD originally was a tool used only by aerospace and other major industrial corporation. The introduction of PC CAD packages, such as, AutoCAD, VersaCAD, CADKEY, and so on, has made it possible for small companies and even individuals to own and use CAD systems. By1980, more than 100,000 PC CAD packages had been sold. Today PC-based solid modelers are available and are becoming increasingly popular. Because rapid developments in microcomputers have enabled PCs to carry the heavy computational load necessary for solid modeling, many solid modelers now run on PCs, and the platform has become less of an issue. With the standard graphics user interface (GUI), CAD systems can be ported easily from one computer to another , Most major CAD systems are able to run on a variety of platforms. There is little difference between mainframe, workstation, and PC-based CAD systems. The Architecture of CAD A CAD system consists of three major parts: (1)Hardware computer and input/output(I/O)devices. (2)Operating system software. (3)Application software CAD package. Hardware is used to support the software functions. A wide range of hardware is used in CAD systems. The operating system software is the interface between the CAD application software and the hardware. It supervises the operation of the hardware and provides basics functions such as creating and removing operation tasks, and providing access to software resources such as files, editors, compilers and utility programs. It is important not only for CAD software, but also for non-CAD software. The application software is the heart of a CAD system. It contains of programs that do 2-D and 3-D modeling, drafting, and engineering analysis. The functionality of a CAD system is built into the application software. It is application software that makes one CAD package different form another. Application software is usually operating-system-dependent. To transport a CAD system running in one operating system to another operating system is not as trivial as recompiling the software. Therefore, attention must be given to the operating system as well. Computer Aided Design Computer aided design gives the designer the ability to experiment with several possible solutions. Usually some forms of design analysis calculations need to be done and many programs have been written for this task. The computer provides the designer with a powerful tool for analyzing proposed designs and for preparing formal drawing of the final design. Two-dimensional drawing is one area in which computer methods can off significant, quantifiable cost advantages over traditional paper and pen methods, but a CAD system is not just an electronic drawing board. Computer drawing systems enable designers to produce fast accurate drawings and easily modify them. Draught productivity rises dramatically when repetitive work is involved, since standard shapes are constructed only once and can be retrieved from a library. Cut and paste techniques are used as labor-saving aids. When several detail drawn by one person can be easily incorporated into different assemble drawing. This central database also serves as a library of standard preferred computers. Finite element is a sophisticated stress analysis technique much used by civil and mechanical engineers. It consists of dividing a structure into small, but finite, components and calculating the force between each element. If the elements are small enough, a good estimate of the internal stresses in a structure or solid body can be obtained. These computer techniques are routinely used in the design of large structure such as ship hulls, bridges, aircraft fuselages and offshore oil rig. The motor car industry also uses similar methods for design and manufacture of car bodies. Two-dimensional Drawings CAD makes possible multiview 2D drawing, with an endless possibility of views in range of scales from microns to meters to meters. It gives the mechanical designer the ability to magnify even the smallest of components to ascertain if the assembled components fit properly and even to design programs to identify automatically potential problems in CAD assembly. Parts with different characteristics, such as movable or stationary, can be assigned different colors on the display. Parts can be dimensioned with automatic dimensioning changes, allowing for expedient engineering design changes. Three-Dimensional Drawings Designers have even more freedom with the advent of 3D modeling. They can 3D parts and manipulate them in endless variations to achieve the desired results. Through finite element analysis FEA), stress can be applied to a computer model and the results graphically displayed, giving the designer guick feedback on any inherent problems in a design before the creation of a physical prototype. 3Dmodels can be created in wire-frame, in surfaces or in solid form. In wire-frame, lines and arcs form edges that generate the model. The result is a 3D form that can be viewed from any location but still only a skeletal form. Creating a surface stretches a skin over the skeleton (Fig.8-1b).Once this is done, the model can be rendered so that it appears more tangible. Surface models are commonly used in the creation of sheet metal developments that can be unfolded for manufacture. Solid models are the most complex level of modeling and while the programs to create them have been available for some time on large mainframe computers, it is only recently that microcomputers have reached a level of power that allows the running of the sophisticated algorithms needed to create solid model（Fig.8-2）. The computer “thinks” the solid is sold mass so it can be “drilled”, “machined,”or “welded” as if it were an actual physical part. It can be made out of any material’s characteristics, thereby allowing calculations of mass to be made. CAD’S Benefits The benefits of computer use in drafting and design tasks are impressive: increased speed, greater accuracy, reduction of hardcopy storage space as well as better recall, enhanced communication capabilities, improve quality and easier modification. Speed A person computer used in industry can perform a task at an average rate of 33 million operations per second; newer computer are even faster. This is an important feat when using it to calculate the amount of deflection of a component, when theoretical physical forces are applied to it, through finite element analysis(FEA) or when displaying an entire city plan on a monitor, both of which are time-consuming and calculation-intensive tasks. AutoCAD software can duplicate any geometry as many times as required and can also perform crosshatching and dimensioning automatically and equally as fast. Accuracy The AutoCAD program has an accuracy of 14 significant digits of precision for each point, depending on the operating system and computer platform. This extremely important when the program must round off numbers during mathematical calculations such as segmenting a circle. Storage The computer can store thousands of drawings in the physical space that it would take to store hundreds of manual drawings. Also, the computer can search and find a drawing with ease, as long as the operator possesses the correct. Communication Because the computer’s data is stored in an electronic form, it cam be sent to s variety of locations. The first obvious location is the monitor. The computer can display the data on the screen in different forms such as graphics, easily converting the data into readable drawing. The data can also be a plotter to produce the familiar paper drawing, via a direct link to a computer-aided manufacturing (CAD) machine or via telephone to anywhere around the globe. You no longer have to mail drawing, risking damage and loss; they can not be at their destination instantly via the telecommunications network. 課題研究擬采用的手段和工作路線 ]課程設計方法： 1) 獨立思考，繼承和創新 設計時，要認真閱讀參考資料，繼承或借鑒前人的設計經驗和成果，但不地進行改進和創新。能盲目地全盤抄襲，應根據具體的設計條件和要求，大膽 2) 全面考慮 機械零部件地強度、剛度、工藝性、經濟性和維護等要求 任何零部件的機構和尺寸，除去考慮它的強度剛度外，還應該綜合考慮零件本身及整個部件的工藝性要求、經濟性要求等才能確定。 3) 設計方法 通過計算確定零件的基本尺寸，再通過草圖設計決定其具體結構和尺寸；而有些零件則需先經初算和繪草圖，得出初步符合設計條件的基本結構尺寸，然后再進行必要得計算，根據計算的結果，再對結構和尺寸進行修改。 4) 使用標準和規范 設計時應盡量使用標準和規范，這有利于零件的互換性和工藝性，同時也可減少設計工作量、節省設計時間，對于國家標準或部門規范，一般都要 嚴格遵守和執行。設計中采用標準或規范的多少，時評價設計質量的一項指標。因此，課程設計中，凡是有標準或規范的，應該盡量采用 工作路線： 1) 設計準備 了解設計任務書，明確設計要求、工作條件、設計內容的步驟；通過查閱有關設計資料，觀看電教片和參觀實物或模型等，了解設計對象的性能、結構及工藝性；準備好設計需要資料、繪圖工具；擬定設計計劃等。 2) 校核V帶及減小噪音的措施 擬定和確定工作方案；選擇電機；校核V帶。大致分析壓縮機產生噪聲的原因和有效減小噪聲的措施。 3) 工作原理草圖設計 繪制工作原理草圖；進行各零部件和結構件設計。 4) 繪制零件工作圖 繪出零件的必要視圖；標注尺寸、公差及表面粗糙度；編寫技術要求和標題欄等 5) 編寫設計說明書 寫明整個設計的主要計算和一些技術說明。