履帶車輛主動輪減速裝置設計
履帶車輛主動輪減速裝置設計,履帶車輛主動輪減速裝置設計,履帶,車輛,主動,減速,裝置,設計
參考文獻
[1]張展主編.使用機械傳動設計手冊[M].北京：科學出版社,2002.
[2]成大先主編.機械設計手冊[M].北京：化學工業出版社,2002.
[3]張展,張紅松,張曉維.行星差動傳動裝置[M].北京：機械工業出版社,2009.
[4]呂庸厚,沈愛紅.組合機構設計和與應用創新[M].北京：機械工業出版社,2008.
[5]劉惟信主編.汽車設計[M].北京：清華大學出版社,2001.
[6]崔勝民主編.汽車主減速器的優化設計[J].會議論文,2007.
[7]胡磊主編.汽車主減速器螺旋錐齒輪參數化建模與有限元分析[D].武漢理工大學學位論文,2008.
[8]陳家瑞主編.汽車構造[M].北京:機械工業出版社,2004.
[9]余志生主編.汽車?yán)碚揫M].北京:機械工業出版社,2000.
[10]鄒慧君等主編.機械原理[M].上海:高等教育出版社,2003.
[11]濮良貴等主編.機械設計[M].北京: 高等教育出版社,2001.
[12]王望予等主編.汽車設計[M].北京:機械工業出版社,2004.
[13]郭竹亭主編.汽車車身設計[M].長春:吉林科學技術出版社,2004.
[14]儷明等.汽車結構抗疲勞設計[M].合肥:中國科技大學出版社,2006.
[15]李偉,劉惟信.考慮誤差的輪齒嚙合剛度的計算和降低齒輪動載的優化設計[J].齒 輪.1987,11(3):16~21.
[16]ReimpellJ.StollH.TheAutomotiveChassis:EngineeringPrinciples.Warrendale,PA15096, USA[J],SAE,1996.
[17]Nakayama T,SudaE.Thepersentand future of electric power steering.Int.J.of Vehicle design[J],1994,15(3,4,5)；243～254.
致 謝
大學生活匆匆而過，回憶走過的往事，令我真想回到回憶中，一晃就到了大四做畢業設計的時候。在做畢業設計的時（履帶車輛主動輪減速裝置的設計）使我受益非淺，從中我不但對以前所學知識有了系統的認識，而且可以把以前所學的各種知識進行綜合運用，這一點是以往各個學期課程中所學不到的。在做完畢業設計的時候，一種全身輕松的感覺。學校生活在充滿陽光的六月劃上一個句號，而對于我以后人生卻只是一個圓滿的開端，我將面對新的生活新的工作，開始我工作中的打拼、奮斗。
在論文設計的過程當中，我閱讀的很多的資料，對各種減速器作了深入分析與可行性研究，使我對減速器有了一定的了解。另外通過運用AUTOCAD繪圖，更使我對AUTOCAD的運用更加熟練，這些對我來說都是收獲。在畢業論文完成之際，首先要感謝我的指導老師朱榮福老師。在設計的開始我對減速器認識的并不是很多，朱老師能耐心的給我講解減速器，并對我下一步的設計耐心的指導。朱老師給我提供的大量的資料和指導建議。指導我應該注意細節問題，細心的給我指出錯誤，進行修改。朱榮福老師誨人不倦的工作作風，一絲不茍的工作態度，嚴肅務實認真的治學風格為我樹立了榜樣，在今后工作學習中，我一定會更加嚴格要求自己。特此向朱老師致以崇高的敬意和衷心的感謝！
再有就是，感謝大學生活中伴我身邊左右的同學、朋友，感謝他們?yōu)槲姨岢龅膶氋F建議和意見。有了他們的鼓勵、幫助、支持。我才能充實的度過了大學期間的學習生活。
最后，感謝汽車與交通工程學院為我的畢業設計提供了場所和一些必要的設備，
對所有的老師、同學、表示衷心的感謝。
附 錄A
Power transmission technology difficulty analysis
1 And power system working characteristics
Electric vehicle has the advantages mainly in the following aspects:
(1)Compared with the same kind of car engine emission reduction.
(2) The motor as auxiliary power, to make the engine can play in good conditions, the efficiency of work and through the recycling braking energy, improve the vehicle's fuel economy.
(3) By decrease engine load reduces the noise.
(4) Transformed at present only gas stations, does not need to invest in new fuel loading.
2, Planet row the characteristic of structure series
(1) The engine is always in the best condition driving generators, so high efficiency, energy saving effect, have certain emissions, reduce pollution and low;
(2) Installed the engine-generator, flowing energy feed to the traction motor, compared with the electric car trip mileage improved significantly;
(3) Control system function, structure is simple, especially the operation control only generator according to the storage battery charging and discharging state decided to power or stopped.
3. Selection strategy
3.1 A motor vehicles in China for the development of has just started, to speed up the development of the hybrid products in China, the research and use for reference foreign results is very necessary. Power system selection in hybrid developing in a position of importance. Because of the different control strategy is based on a hybrid drive system for making and optimization. Can say power system structure types of the option to decide the hybrid of research and development, the relationship between key development progress and product the level, is the most important of HEV development and the key step. So the development must be in deep research of careful analysis and weigh the advantages and disadvantages, and on the basis of the structure of the power system type make discreet choice. In the development of comprehensive coordination performance should be advanced, technical complexity and costs and maintenance cost, according to the relationship between the use of cars conditions and their technical conditions, choose to meet the performance of both must be advanced, and not beyond the current technology conditions, and the price and maintenance costs for market acceptable to the power system type. Therefore, it is necessary to consider the following factors: (1) Motor drive power system based on particular condition commonly carry on the design. This is because most of the power system is more sensitive to working conditions, different operating conditions of the performance difference is very big, only in specific conditions to be fully low oil consumption, low emission advantages. (2) Different types of hybrid differences between performance is very clear, in the selection of the power system must be caused by the difference between performance to structure sufficient attention. If demand is high for acceleration performance, it is necessary to choose equipped with the structure of peak power regulator type; If the economy too hard, tandem, we cannot be the right choice. (3) The technical conditions, in addition to developing the conditions and power outside, still include industrial base. Stressed because of some common industrial base of power system in China, the components of the product level can not meet the requirements or still cannot production. In the actual product development will always have a certain schedule, if the technology conditions cannot be, it will be difficult to guarantee for achieving the development plan. Necessary to explore for his technical conditions especially industrial base of hybrid structure types, advocate structure innovation. (4)Open power system is to point to the need to further develop the space. Product performance is a gradually perfect process, the same development work might not one pace reachs the designated position, also need to have been the perfect. In the specific development work should be followed from the simple to the complex, from easy to difficult train of thought, to choose the technical conditions of the low required appropriate simple structure, development.(5) The structure of the power system of hybrid cost impact, this is because different types of power system for the kinds of components, the quantity and the performance requirements the difference is very big. And the kinds of components, the quantity and the performance index is the effect of the main factors of hybrid costs. Selection should also consider the use and maintenance costs, the more complex structure, the higher failure rate, use and maintenance cost is higher. Price and maintenance expenses directly related to the industrialization of HEV, if can't industrialization, can provide the necessary for further development of the capital, it will be difficult to promote and raising the level of technology to improve the performance of. In fact, the fine performance but because the price too high to commercialization, and even forced to give up the development of HEV examples not rarely seen, we should not repeat it.
In view of our country at present the city's air pollution problems and oil shortages are very serious, and the technological basis of weak, preference hybrid system should be relatively simple structure, applicable to general city mode of the structure and the working condition between the cities series of parallel structure, and to buses and cars as a key development targets.
It a: a hybrid car engine starting on and off, make frequent driving system and accessories (such as air conditioning and power steering, etc) of power management is complicated, so need advanced detection and control system; The existing to heat engine primarily hybrid unit in the fuel into YouYongGong at the same time, needs to improve the efficiency of conversion, and also to meet strict emission standard.
Second: energy storage device (battery) to have higher than power, to meet the car accelerated and climbing to the need of high power when; At the same time, energy storage device must use heat control management, want to have higher than energy, long service life and low production cost.
Third: must reduce the size of the power electronics device, reduce the quality and reduce production cost.
Its 4: need to build a more advanced driving system mathematical model (including static and dynamic), is this the computer simulation and analysis of the foundation.
Its 5: make perfect hybrid cars of relevant standards and regulations, for hybrid cars, which laid the foundation of the market.
3.2 Electric drive system and car accessories
To make a hybrid car of the power, economy, comfort, safety and convenience to consumers can acceptable level, there must be efficient and economic power drive system and car accessories. However, the system of some components in the traditional car without a corresponding parts, so need to development design. In development at the same time, want to consider the system synthesis performance, costs and maintenance performance.
1) Motor in a hybrid car, motor is the role of the generator or energy storage device provide electrical energy into mechanical energy is used to drive the wheels. And the traditional automobile different is, motor speed can provide in full, and engine torque must be to wait until "mad" can only output loaded with torque. This makes hybrid cars have excellent starting and accelerating performance. In addition, used for a hybrid car motor must have good controllability and fault tolerance, and low noise, high efficiency, and is not sensitive to the voltage fluctuations and performance.
Used for a hybrid car motor type has ac induction motor, permanent magnet motor and switched reluctance motor. At present the typical is ac induction motor, but this kind of motor are born is difficult to solve the contradiction between power and efficiency. Therefore, we need to study out can be used for hybrid cars, have higher efficiency and power density of permanent magnet motor, switched reluctance motor, and other advanced motor, to replace current use of ac induction motor. At the same time for the motor control method and the cooling system research also should go further.
2)Regenerative braking, this kind of hybrid cars can recycle braking energy consumption part of. When a hybrid car brake, motor, generator, using cars into the kinetic energy to produce electricity, and can be stored in battery in it for later. In hybrid cars, there are many form of energy can be used as the regenerative braking energy storage device, such as high-speed flywheel, super capacitor, elastic device and all kinds of thermal system, etc. Of course, the traditional friction braking is necessary, so you need to consider how to two sets of braking equipment reasonable use, reasonable, and the problems of control. Braking, the electronic control system of the regenerative braking and friction braking system at the same time, the braking performance will be improved.
3) Car accessories, any style of car to get consumers and all must consider the car comfort. The automobile air-conditioning accessories can improve the car of comfort, but energy use is very big, if not reduce the load, they will be for the automobile fuel economy have a huge impact. So, whether in the car at the same time, improve the comfort to improve fuel economy is at present to innovation of research. Traditional bus attachments system on the engine design, not for hybrid cars drive system. For example, the traditional automobile accessories (such as air condition, power steering, etc) by the engine drive, but because the hybrid car engines are not always work, need to design and production can the independent powered accessories. Be like again, because a hybrid car engine frequently starting and close, make its drive system and accessories for the power management complicated, need to have a more advanced monitoring and control system.
3.3 A hybrid car simulation technology
In the research and development of a hybrid car components and choose the best structure, need to design and maker can quickly reduce research scope, find technical breakthrough. Technical scheme selection stages, in the system the choice, can rely on efficient modeling tools computer, through the alternate use of candidate subsystems simulation, so as to find the best solutions. Computer models for each candidate subsystem provides a detailed specifications and design parameters, and convenient to the designer's work, but also to make model for designing and manufacturing engineering target and plan.
Now, the responsible for electric cars and hybrid vehicles standards and regulations is the organization of the international electrotechnical commission (IEC), the international organization for standardization (ISO), the American auto engineers association (SAE), etc. For our country, because of hybrid cars are already in the experimental stage, and all the standards work should begin corresponding. For future will appear DuoZhong driving car coexistence, car standards will also need to consider the traditional automobile, hybrid cars and pure electric vehicle the comparability between universality and.
附 錄B
動力傳動技術難點分析
1、動力系統工作特點
動力汽車所具備的優點主要表現在以下幾個方面：
(1)與同類發動機車型相比, 排放降低。
(2)由于以電動機作為輔助動力，使發動機能夠在發揮良好效率的工況下工作，并且通過回收制動能量，提高了整車的燃料經濟性。
(3)通過減小發動機負荷降低了噪聲。
(4)只需改造目前的加油站，不必重新投資建設新的燃料供應站。
2、行星排串聯式結構的特點
(1)發動機總是在最佳工況下驅動發電機，因此效率高，有一定節能效果，排放亦低，減少了污染；
(2)安裝了發動機—發電機組，源源不斷地將電能輸送給牽引電機，與電動汽車相比行駛里程有顯著的提高；
(3)控制系統功能、結構比較簡單，特別是發電機運行的控制只需根據蓄電池充放電狀態決定發電或停止。
3.選型策略
3.1我國一電機為動力汽車的研制開發才剛剛起步，為加快我國混合動力產品的開發, 研究和借鑒國外的成果是十分必要的。動力系統選型在混合動力開發中處于重要的地位。因?yàn)榭刂撇呗允歉鶕?jù)不同的混合動力驅動系統進行制定和優化。可以說動力系統結構型式的選擇決定了混合動力研究開發的重點,關系著開發的進度和產品的水平，是HEV 開發中首要的和關鍵的一步。因此研究開發時必須在深入調研、仔細分析和權衡利弊的基礎上, 對動力系統的結構類型作出慎重的選擇。在開發中應綜合協調性能先進性、技術復雜性和成本及維護費用之間的關系, 根據車輛的使用條件和自己的技術條件，選擇既能夠滿足一定的性能先進性，又不超出目前技術條件，并且價格與維護費用能為市場所接受的動力系統結構類型。為此需要考慮以下因素：(1)電機傳動動力系統一般基于特定工況進行設計。這是因?yàn)槎鄶?shù)動力系統對工況比較敏感, 不同工況性能差別很大, 只有在特定的工況下才能充分發揮低油耗、低排放的優點。(2)不同類型的混合動力之間性能差異十分明顯, 在選型時必須對由動力系統結構引發的性能差異給予充分關注。如果對加速性能要求高，就有必要選擇配有峰值功率調節器的結構型式；如果對經濟性要求苛刻，串聯式就難以成為合適的選擇。(3)所謂技術條件,除研究開發的條件和力量外,還包括工業基礎。強調工業基礎是因?yàn)閷?duì)一些常見的動力系統的部件, 我國的產品水平還不能滿足需要或尚無法生產。進行實際的產品開發總會有一定的進度要求，如果技術條件無法保證，就難以實現預定開發目標。有必要探索適合自己技術條件尤其是工業基礎的混合動力結構型式，提倡結構創新。(4)開放性是指動力系統需要進一步完善的空間。產品性能是一個逐步完善的過程，同樣開發工作也不可能一步到位，也需要進行不斷的完善。在具體開發工作中應該遵循由簡單到復雜、由易到難的思路，先選擇對技術條件要求較低、適當簡單的結構進行開發。
(5)動力系統的結構對混合動力成本影響很大，這是因?yàn)椴煌愋偷膭?dòng)力系統對部件的種類、數量和性能要求差別很大。而部件的種類、數量和性能指標是影響混合動力成本的主要因素。選型時還應考慮使用、維護費用，結構越復雜，故障率越高，使用和維護費用也越高。價格和使用維護費用直接關系到HEV 的產業化，如果不能產業化，就不能為進一步開發提供必要的資金，也就難以促進技術水平的提高和性能的改善。事實上，性能優良但因價格過高而無法商業化、甚至被迫放棄的HEV 開發實例并不鮮見，我們不應重蹈覆轍。
鑒于我國目前城市空氣污染問題和石油短缺問題都十分嚴重, 而且技術基礎較為薄弱的情況, 優先選擇的混合動力系統應為結構相對簡單, 適用于普通城市工況的串聯式結構和城市間工況的并聯式結構, 并以公共汽車和轎車作為重點開發對象。
其一:混合動力汽車發動機頻繁起動和關閉,使驅動系統和附件(如空調和動力轉向等) 的電能管理變得復雜,因此需要先進的檢測和控制系統; 現有的以熱力發動機為主的混合動力單元在將燃油轉化為有用功的同時,需要提高轉化效率,同時還要滿足嚴格的排放標準。
其二:能量存儲裝置(電池) 要具有較高的比功率, 以滿足汽車加速和爬坡時對大功率的需要;同時,能量存儲裝置必須采用熱能控制管理,要有較高的比能量、較長的使用壽命和低廉的制造成本。
其三:必須減小電力電子器件的尺寸,減輕質量和降低制造成本。
其四:需要建立更先進的驅動系統數學模型(包括靜態的和動態的) , 這是計算機仿真和分析的基礎。
其五:制定完善的混合動力汽車相關標準和法規, 為混合動力汽車的市場化奠定基礎。
3.2電力驅動系統和汽車附件
要使混合動力汽車的動力性、經濟性、舒適性、安全性和便利性達到廣大消費者所能接受的水平, 必須要有高效、經濟的電力驅動系統和汽車附件。然而, 這些系統中的有些部件在傳統汽車中沒有相應件, 所以需要重新開發設計。在開發的同時,要考慮到系統的綜合性能、成本和維修性能。
1) 電機在混合動力汽車上, 電機的作用是將由發電機或儲能裝置提供的電能轉換為用于驅動車輪的機械能。與傳統汽車不同的是,電機在低速時可以提供滿載轉矩, 而發動機則必須要等到“暴跳如雷”時才能夠輸出滿載扭矩。這樣就使混合動力汽車具有出色的起步加速性能。此外,用于混合動力汽車的電機還必須要具有良好的可控性和容錯能力, 以及低噪聲、高效率,同時具有對電壓波動不敏感等性能。
用于混合動力汽車的電機類型有交流感應電機、永磁電機和開關磁阻電機。目前具有代表性的是交流感應電機, 但這種電機與生俱來就很難解決其功率和效率之間的矛盾。因此, 需要研究出能夠用于混合動力汽車的,具有更高效率和功率密度的永磁電機、開關磁阻電機等先進電機, 以替代目前使用的交流感應電機。同時對電機的控制方法和冷卻系統的研究也應繼續深入。
2) 再生制動,這種混合動力汽車能夠回收制動時消耗的一部分能量。當混合動力汽車制動時,電機變成了發電機, 利用汽車的動能來產生電能,并能夠存儲在蓄電池中以備后用。在混合動力汽車上, 有許多能量形式可以作為再生制動的儲能裝置, 例如高速飛輪、超大電容器、彈力裝置以及各種熱系統等。當然,傳統的摩擦制動還是必要的, 這樣就需要考慮如何將兩套制動裝置合理利用、合理控制的問題。制動時, 由電子控制的再生制動系統和摩擦制動系統同時作用,制動性能將明顯提高。
3)汽車附件,任何款式的汽車要得到用戶的喜愛, 都必須考慮汽車的舒適性。雖然汽車空調等附件能提高汽車的舒適性, 但所消耗的能量很大,若不減少這些負載,它們將會對汽車的燃料經濟性產生巨大的影響。所以,能否在汽車舒適性得到提高的同時, 改善燃料經濟性是目前要?jiǎng)?chuàng)新研究的課題。傳統汽車上的各個附件系統都是圍繞發動機設計的, 不適用于混合動力汽車的驅動系統。例如,傳統汽車的附件(如空調、動力轉向等) 由發動機驅動,但由于混合動力汽車的發動機并不一直工作, 就需要設計和生產能獨立提供動力的附件。再如,由于混合動力汽車發動機頻繁地起動和關閉, 使其對驅動系統和附件的電能管理變得復雜, 需要有更為先進的監測和控制系統。
3.3混合動力汽車仿真技術
在研究和開發混合動力汽車的部件和選擇最佳結構時, 需要設計和制造者能夠很快縮小研究范圍,找到技術突破口。技術方案選擇階段, 在系統選擇上, 可依靠高效的建模工具計算機,通過交替使用候選的子系統進行模擬仿真,從而找到最佳的方案。計算機模型為每個候選子系統提供了詳細規格和設計參數, 從而方便了設計者的工作, 而且還有助于為設計和制造樣車制定工程目標和計劃。
目前,國際上負責電動汽車和混合動力汽車標準和法規制定的組織有國際電工委員會( IEC)、國際標準化組織( ISO)、美國汽車工程師協會(SAE)等。對我國來說,由于混合動力汽車已處于實驗階段，各項標準的制定工作也應該相應開始進行。考慮到今后將出現多種動力驅動的汽車共存的情況，汽車標準的制定也將需要考慮傳統汽車、混合動力汽車和純電動汽車之間的可比性和通用性。
收藏