平面四桿機構設計

平面四桿機構設計,平面,機構,設計 平面四桿機構的運動性能研究 學生姓名：劉昕 班級：0781051 指導老師：許瑛 摘要：平面四桿機構是主要的常用基本機構之一,應用十分廣泛,也是其他多桿機構的基礎。由于連桿機構的性能受機構上繁多的幾何參數的影響,呈復雜的非線性關系,無論從性能分析上還是性能綜合上都是一個比較困難的工作,尚需作進一步深入研究。本文基于平面四桿機構的空間模型,將機構實際尺寸轉化為相對尺寸,在有限的空間內表示出無限多的機構尺寸類型,從而建立起全部機構尺寸類型和空間點位的一一對應關系,為深入研究平面四桿機構的運動性能與構件尺寸之間的關系提供了基礎。根據曲柄搖桿機構、雙曲柄機構、雙搖桿機構、單滑塊四桿機構的不同特點,詳細分析各類機構的運動性能參數與構件尺寸之間的關系,指出構件尺寸的變化對機構運動性能的影響,并繪制相關的運動性能圖譜。針對具有急回特性的Ⅰ、Ⅱ型曲柄搖桿機構,通過深入分析極位夾角與構件尺寸之間的內在關系,獲得了Ⅰ型曲柄搖桿機構極位夾角分別小于、等于或大于90°的幾何條件以及Ⅱ型曲柄搖桿機構極位夾角一定小于90°的結論,揭示了曲柄搖桿機構設計時作為已知條件的極位夾角和搖桿擺角之間應滿足的要求。本文得出的圖譜和相關結論,為工程應用中機構性能分析和機構綜合提供了理論依據。 關鍵詞： 平面四桿機構 空間模型 運動性能 指導老師簽名： Plane four clubs institutions of Sports performance research Student name：Liu Xin Class：0781051 Supervisor: Xu Ying Abstract:The planar four-bar linkages are one type of basic mechanisms, and they are applied very extensively. The performances of the linkages depend on their geometrical parameters and present the complicated non-linear relations. It is necessary to make the further research on them for analysis, synthesis and application of linkages.By using of the three-dimensional models of the planar four-bar mechanisms, the actual sizes of mechanisms are transformed relative ones, and all size types of mechanisms can be figured by spatial coordinates. It is the foundation for research on the relations between the link dimensions and kinematic capability parameters.Aimed at the different characteristics of crank-rocker mechanism, double-crank mechanism, double-rocker mechanism and single-slider mechanism, some inherent relations between the link dimensions and the kinematic capability parameters are deeply analyzed, then the relative kinematic capability diagrams are obtained.Based on deeply analysis of inherent relations between the extreme position angle and the link dimensions of typeⅠand typeⅡcrank-rocker mechanisms with quick return characteristics, the geometrical conditions are put forward in this paper, by which we can judge whether the extreme position angle of typeⅠcrank-rocker mechanisms is less than, equal to or lager than 90°. It is proved that the extreme position angle of typeⅡcrank-rocker mechanism is certainly less than 90°. The relations between the extreme position angle and the angular stroke of the rocker are brought to light, which should be satisfied during the kinematic design of crank-rocker mechanisms.The diagrams and conclusions obtained in this paper provide theoretic foundation for the capability analysis and synthesis of mechanisms. Keyword: Planar four-bar linkage Space model Sports Performance Signature of Supervisor: