購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
單位代碼 0 2
學 號
分 類 號 TH
密 級
畢業設計
文獻翻譯
院（系）名稱
工學院機械系
專業名稱
機械設計制造及其自動化
學生姓名
指導教師
2012年 03 月 10 日
黃河科技學院畢業設計（文獻翻譯） 第12頁
_____________________________________________________________________________________
1. RADAR IN BRIEF
Radar is an electromagnetic sensor for the detection and location of reflecting
objects. Its operation can be summarized as follows:
● The radar radiates electromagnetic energy from an antenna to propagate in space.
● Some of the radiated energy is intercepted by a reflecting object, usually called
a target, located at a distance from the radar.
● The energy intercepted by the target is reradiated in many directions.
● Some of the reradiated (echo) energy is returned to and received by the radar antenna.
● After amplification by a receiver and with the aid of proper signal processing, a decision is made at the output of the receiver as to whether or not a target echo signal is present. At that time, the target location and possibly other information about the target is acquired.
A common waveform radiated by a radar is a series of relatively narrow, rectangular-like pulses. An example of a waveform for a medium-range radar that detects aircraft might be described as a short pulse one millionth of a second in duration (one microsecond); the time between pulses might be one millisecond (so that the pulse repetition frequency is one kilohertz); the peak power from the radar transmitter might be one million watts (one megawatt); and with these numbers, the average power from the transmitter is one kilowatt. An average power of one kilowatt might be less than the power of the electric lighting usually found in a “typical” classroom. We assume this example radar might operate in the middle of the microwave frequency range such as from 2.7 to 2.9 GHz, which is a typical frequency band for civilairport-surveillance radars. Its wavelength might be about 10 cm (rounding off, for simplicity). With the proper antenna such a radar might detect aircraft out to ranges of 50 to 60 nmi, more or less. The echo power received by a radar from a target can vary over a wide range of values, but we arbitrarily assume a “typical” echo signal for illustrative purposes might have a power of perhaps 10?13 watts. If the radiated power is 106 watts (one megawatt), the ratio of echo signal power from a target to the radar transmitter power in this example is 10–19, or the received echo is 190 dB less than the transmitted signal. That is quite a difference between the magnitude of the transmitted signal and a detectable received echo signal.Some radars have to detect targets at ranges as short as the distance from behind home plate to the pitcher’s mound in a baseball park (to measure the speed of a pitched ball), while other radars have to operate over distances as great as the distances to the nearest planets. Thus, a radar might be small enough to hold in the palm of one hand or large enough to occupy the space of many football fields Radar targets might be aircraft, ships, or missiles; but radar targets can also be people, birds, insects, precipitation, clear air turbulence, ionized media, land features (vegetation, mountains, roads, rivers, airfields, buildings, fences, and power-line poles), sea, ice, icebergs, buoys, underground features, meteors, aurora, spacecraft, and planets. In addition to measuring the range to a target as well as its angular direction, radar can also find the relative velocity of a target either by determining the rate of change of the range measurement with time or by extracting the radial velocity from the doppler frequency shift of the echo signal. If the location of a moving target is measured over a period of time, the track, or trajectory, of the target can be found from which the absolute velocity of the target and its direction of travel can be determined and a prediction can be made as to its future location. Properly designed radars can determine the size and shape of a target and might even be able to recognize one type or class of target from another.
2 APPLICATIONS OF RADAR
Military Applications. Radar was invented in the 1930s because of the need for defense against heavy military bomber aircraft. The military need for radar has probably been its most important application and the source of most of its major developments, including those for civilian purposes
The chief use of military radar has been for air defense operating from land, sea, or air. It has not been practical to perform successful air defense without radar. In air defense, radar is used for long-range air surveillance, short-range detection of low altitude “pop-up” targets, weapon control, missile guidance, no cooperative target recognition, and battle damage assessment. The proximity fuze in many weapons is also an example of a radar. An excellent measure of the success of radar for military air defense is the large amounts of money that have been spent on methods to counter its effectiveness. These include electronic countermeasures and other aspects of electronic warfare, anti radiation missiles to home on radar signals, and low cross-section aircraft and ships. Radar is also used by the military for reconnaissance, targeting over land or sea, as well as surveillance over the sea.
On the battlefield, radar is asked to perform the functions of air surveillance (including surveillance of aircraft, helicopters, missiles, and unmanned airborne vehicles), control of weapons to an air intercept, hostile weapons location (mortars, artillery, and rockets), detection of intruding personnel, and control of air traffic.
The use of radar for ballistic missile defense has been of interest ever since the threat of ballistic missiles arose in the late 1950s. The longer ranges, high supersonic speeds, and the smaller target size of ballistic missiles make the problem challenging. There is no natural clutter problem in space as there is for defense against aircraft, but ballistic missiles can appear in the presence of a large number of extraneous confusion targets and other countermeasures that an attacker can launch to accompany the reentry vehicle carrying a warhead. The basic ballistic missile defense problem becomes more of a target recognition problem rather than detection and tracking. The need for warning of the approach of ballistic missiles has resulted in a number of different types of radars for performing such a function. Similarly, radars have been deployed that are capable of detecting and tracking satellites.
A related task for radar that is not military is the detection and interception of drug traffic. There are several types of radars that can contribute to this need, including the long-range HF over-the-horizon radar.
3 MECHANICAL DESIGN CONSIDERATIONS
Reflector mechanical design is a detailed discipline unto itself with a multitude of factors to consider. Furthermore, designs vary significantly depending upon many factors, including platform, reflector size, environment, frequency of operation, scan/FOV, and cost constraints. Although it is not within the scope of this chapter to address mechanical design in detail, a brief survey of design factors and considerations pro-vides some useful insights.
The platform, i.e., vehicle, or installation site is a significant driver for radar sensors in general, including the antenna. Platform is a generic term referring to the vehicle where the radar and antenna are installed. Typical radar platforms include pedestal (fixed site), ground vehicles, ships, airplanes, UAVs, and spacecraft/satellites. The following short section is devoted to platform impacts and some key associated design drivers. These include mass, volume (stowage/deployment), gimbals (precision
mechanical positioning systems), materials, and mechanical tolerances. Finally, there is a brief discussion of environmental design considerations and radomes.
The degree to which these five factors, mass, volume, stowage, deployment, and gimbaling drive the reflector design vary in accordance with the reflector system and the platform. However, mass and volume constraints generally have a significant impact on the reflector system design. Furthermore, some sort of stowage and deployment of the reflector is sometimes required, especially for larger reflectors. These considerations and constraints drive the choices of materials, structural designs, passive and active mechanisms, etc. It is beyond the scope of this chapter to address this topic in detail. However, it’s useful to show a couple examples for illustration.
Consider, first, a ground-based dual-reflector design with a 9-meter main reflector aperture. This reflector, shown in Figure 12.37, is used for an S-band meteorological radar application.48 The panelized aluminum reflector is mechanically scanned via use of a gimbal (not shown). The feed, a dual-polarized waveguide horn, is also shown in Figure 12.37. The structural design of this large reflector was a significant task driven by the need to maintain low reflector surface distortion (less than 50 mils) with severe wind and gravity-loading forces and thermal gradients.
The second example is a space-based deployable reflector. The mesh reflector, shown in both stowed and deployed configurations in Figure 12.38, is an offset reflector with a 12.25 meter circular projected aperture. This L-band design, developed by Northrop-Grumman Space Technologies Astro Aerospace group, has been successfully launched and deployed and is currently in use on several communication satellites. A total of five reflectors of aperture diameters 9 meters, 12 meters, and 12.25 meters have been flown. Studies have addressed the potential usage of this reflector technology for various space-based radar applications, including weather sensing/monitoring (NEXRAD)and planetary SAR mapping missions (lunar and Mars). Significant features of this reflector include its precise surface accuracy, high stiffness and stability, low mass, and reliable deployment. For example, for the reflector shown in Figure 12.38, an RMS surface accuracy of less than 50 mils from all error sources including in-orbit thermal gradients was achieved via prudent material choices and matching of the associated material coefficients of thermal expansion (CTEs). Pointing precision due to eclipse thermal snap has been measured in orbit at less than 0.01 degrees.
4 SOME PAST ADVANCES IN RADAR
A brief listing of some of the major advances in technology and capability of radar in the twentieth century is given, in somewhat chronological but not exact order, as follows:
● The development of VHF radar for deployment on surface, ship, and aircraft for military air defense prior to and during World War II.
● The invention of the microwave magnetron and the application of waveguide technology early in WWII to obtain radars that could operate at microwave frequencies so that smaller and more mobile radars could be employed.
● The more than 100 different radar models developed at the MIT Radiation Laboratory in its five years of existence during WWII that provided the foundation for microwave radar.
● Marcums theory of radar detection.
● The invention and development of the klystron and TWT amplifier tubes that provided high power with good stability.
● The use of the doppler frequency shift to detect moving targets in the presence of much larger echoes from clutter.
● The development of radars suitable for air-traffic control.
● Pulse compression.
● Monopulse tracking radar with good tracking accuracy and better resistance to electronic countermeasures than prior tracking radars.
● Synthetic aperture radar, which provided images of the ground and what is on it.
● Airborne MTI (AMTI) for long-range airborne air surveillance in the presence of clutter.
● Stable components and subsystems and ultralow sidelobe antennas that allowed high-PRF pulse doppler radar (AWACS) with large rejection of unwanted clutter.
● HF over-the-horizon radar that extended the range of detection of aircraft and ships by an order of magnitude.
● Digital processing, which has had a very major effect on improving radar capabili-ties ever since the early 1970s.
● Automatic detection and tracking for surveillance radars.
● Serial production of electronically scanned phased array radars.
● Inverse synthetic aperture radar (ISAR) that provided an image of a target as needed for noncooperative target recognition of ships.
● Doppler weather radar.
● Space radars suitable for the observation of planets such as Venus.
● Accurate computer calculation of the radar cross section of complex targets.
● Multifunction airborne military radar that are relatively small and lightweight that fit in the nose of a fighter aircraft and can perform a large number of different air-to-air and air-to-ground functions.
It is always a matter of opinion what the major advances in radar have been. Others might have a different list. Not every major radar accomplishment has been included in this listing. It could have been much longer and could have included multiple examples from each of the other chapters in this book, but this listing is sufficient to indicate the type of advances that have been important for improved radar capabilities.
1 雷達簡介
雷達是一種電磁傳感器，用來對反射性物體檢測和定位。其工作可歸納如下:
(1)雷達通過天線輻射電磁能量，使其在空中傳播。
(2) 部分輻射的能量被離雷達某個距離上的反射體(目標)截獲。
(3)目標截獲的能量重新輻射到許多方向上。
(4) 一部分重新輻射的(因波)能量返回至雷達天線，并被雷達天線所接收。
(5) 在被接收機放大和合適的信號處理后，在接收機的輸出端做出目標回波信號是否存在的判決。此時，目標的位置和可能其他有關目標的信息就得到了。
雷達輻射的一種常用波形是一串窄的類似矩形的脈沖。例如，中距離雷達用來探測飛機的波形可以描述為持續 1 微秒( vs) 的短脈沖:脈沖間隔可能為 lms (因此脈沖重復頻率為1 kHz); 雷達發射機峰值功率可能為 1 兆瓦C1MW); 由這些數據得出發射機的平均功率為 1千瓦C1kW) 0 lkW 的平均功率可能比一個"典型"教室中電燈的功率要小。我們假設這部作為例子的雷達工作在微波E頻段的中部，例如從 2.7-2.9GHz，這是民用機場監視雷達的典型頻段。其波長約為 10cm (簡單起見取整數)。使用合適的天線，這樣一部雷達可以探測
到距離③50-60n mile 左右的飛機。雷達從目標接收到的回波功率可以在很寬范圍的值上變化，但為了示范的目的，我們?nèi)我饧僭O(shè)典型的回波信號可具有1O-13W 的功率。如果輻射的功率是 106W C1 MW) ，則此例中目標回波信號功率與雷達發射機功率的比為 10-19 ，或接收回波比發射信號低 190dB 。這是發射信號和一個可檢測的接收回波信號幅度之間巨大的差別。
一些雷達需要在短到像棒球場上從本壘到投手間的距離上檢測目標(為測量投出球的速度)，而其他雷達則需要在大到至最近的行星的距離上工作。因此，雷達可能小到足夠握在手中，或大到足夠占據許多個足球場的空間。
雷達目標可能為飛機、艦船或者導彈:也可能為人、烏、昆蟲、降雨、晴空空氣端流、電離的媒質、地表特征(植被、山脈、道路、河流、機場、建筑、圍墻、電線桿等)、海洋、冰層、冰山、浮標、地下特征、流星、極光、宇宙飛船及行星。除了測量H 標距離和角度方向之外，雷達通過確定距離隨時間的變化率或從回波的多普勒頻移申提取徑向速度來確定目標的相對速度。如果在一段時間內測量動目標的位置，則可以得到目標軌跡或航跡，從中可以判定目標的絕對速度和運動方向，于是可以對其未來的位置做出預測。合適設計的雷達可以判定目標的尺寸和形狀，甚至可以識別不同類型的目標。
2 雷達應用
因?yàn)榉烙匦蛙娪棉Z炸機的需要，在 20 世紀 30 年代發明了雷達。對雷達軍事上的需要或許是雷達最重要的應用及其主要進展(包括民用雷達的進展)的來源。
軍用雷達的主要用途曾是地面、海面和機載空中防御。離開雷達，實施成功的空中防御是不切實際的。在空中防御中，雷達用來進行遠程監視、低海拔"彈出"目標的短距探測、武器控制、導彈制導、非合作目標識別和戰斗損傷評估。許多武器中的近炸引信也是雷達的一個例子。對軍用防空雷達成功的一個極好度量是在反抗其有效性的方法上花費的大量金錢。這包括電子對抗措施和其他方面的電子戰、尋的雷達信號的反輻射導彈及低截面積飛機和艦船。雷達在軍事上也用在對地面、海面的偵察及海洋監視中。
在戰場上，要求雷達具有執行空中監視(包括對飛機、直升機、導彈和無人機的監視)、空中攔截武器控制、敵方武器定位(迫擊炮、火炮和火箭)、入侵人員檢測和空中交通管制等任務的功能。
3 機械設計方面的考慮
反射面天線的機械設計是一門精細的學科，要考慮很多因素。依據諸如平臺、天線尺寸、工作環境、工作頻率、掃描IFOV 和成本等多種因素有多種不同的設計。限于篇幅，本節不對機械設計詳細敘述，僅對設計須考慮的因素做一概括，提供有用的深入了解。
載車或安裝場地等平臺通常是包括天線在內的雷達傳感器的重要承載部件。平臺是載有雷達和天線的運輸工具的統稱。典型的雷達平臺包括基座(固定站點)、地面汽車、艦船、飛機、無人駕駛飛行器、太空船或衛星等。下面一小段說明平臺的影響和確定設計的關鍵因素。這些因素包括平臺的重量、體積(折疊/展開)、精密機械指向系統、材料、機械公差等。最后，簡要討論了關于環境的設計上的考慮和天線罩。對于不同的反射面天線系統和安裝平臺，質量、體積、折疊、展開和精密機械指向系統等五個因素對反射面天線設計的影響程度各不相同，必須靈活設計。但設計反射面天線系統時，質量和體積通常是主要影響因素。此外，有時還需要考慮折疊和展開，特別是大型反射面。這些要求和約束影響到材料的選擇、結構形式設計、機械自動控制或手動控制等。詳細論述這些專題已經超出了本章的范疇。然而，舉兩個例子說明還是很有益的。
第一個例子是主反射面孔徑為 9m 的地基雙反射面天線，如圖 12 .3 7 所示。該反射面天線用于 S 頻段的氣象雷達I4810 鋁板鑲嵌制成的反射面夭線通過精密指向系統(圖中看不到)的轉動進行機械掃描。圖 12 .3 7 中顯示了雙極化波導喇叭饋源。對于這樣大型的反射面天線，在大風載、重力及熱量梯度的情況1'"，反射面天線要保持較低的表面變形(小于 50 密耳)的結構設計是一項非常重要的工作。
第二個例子是空間可展開反射面天線。該反射面天線系網狀，偏置饋電，圓投影孔徑直徑為 12.2 5m，折疊和展開兩種狀態如圖 12.3 8 所示[49] 。它是 North-Grumman 空間技術航天研發小組研制的 L 波段天線，己經成功發射并展開，目前正用于多顆通信衛星[50] 。共有五部天線在空中運行，孔徑為 9m、 12m 和 12.25m。對于各種星載雷達，包括氣象測量/監視雷達(NEXRAD) [51] 和行星 SAR 成像雷達系統(探月和火星)，人們對這種反射面天線的應用潛力進行了大量研究。這類反射面天線的重要特點是高表面精度、高強度、高穩定性、輕質量及可靠的展開性。例如，對于圖 12 .3 8 所示的反射面天線，在考慮所有誤差源條件下，包括軌道上的熱梯度[通過謹慎選擇材料及正常材料的熱膨脹系數 (CTE)] 匹配，反射面表面的均方根誤差小于 50 密耳。經過在軌測量，由于日照熱劇變引起的指向偏差小于 0.010 。
4 雷達過去的一些進展
下面簡單列出了雷達技術和性能在 20 世紀中一些主要的進展，按不很精確的年代順序排列，如下所示:
(1)第二次世界大戰之前和第二次世界大戰期間，開發為防空部署在地面、艦船和軍用飛機上的 VHF 雷達。
(2) 第二次世界大戰早期微波磁控管的發明和波導技術的應用，以獲得能在微波頻段工作的雷達，從而可使用更小和機動性更強的雷達。
(3 )MIT 輻射實驗室在第二次世界大戰期間存在的五年中開發了超過 100 種不同的雷達型號，為微波雷達奠定了基礎。
(4) Marcum 的雷達檢測理論。
(5) 速調管和行波管放大器的發明和發展，提供了穩定性好的大功率源。
(6) 使用多普勒頻移來檢測淹沒于雜波中的移動目標。
(7)適于空中交通管制的雷達的開發。
(8) 脈沖壓縮。
(9) 單脈沖跟蹤雷達有高的跟蹤精度，以及比以前的跟蹤雷達對電子對抗措施有更好的抵御能力。
(1 0) 合成孔徑雷達，對地面場景和地面上的物體成像。
(1 1) 機載動目標顯示 (AMTI) ，用于在有雜波情況下遠程機載空中監視。
(12) 穩定的元件、子系統和超低副瓣天線，使可大量抑制無用雜波的高 P盯脈沖多普勒雷達 (AWACS) 成為可能。
( 13) 高頻超視距雷達，把飛機和艦船的探測距離擴大了一個數量級。
(14) 數字處理，從 20 世紀 70 年代早期對雷達性能的改善有重大影響。
(1 5) 監視雷達的自動檢測和跟蹤。
(16) 電掃描相控陣?yán)走_(dá)的批量生產。
(1 7) 逆合成孔徑雷達 CISAR) ，提供目標成像，如對艦船等非合作目標識別需要的圖像。
(1 8) 多普勒氣象雷達。
(19) 太空雷達，適于對如金星等行星進行觀測。
(20) 計算機對復雜目標雷達截面積的精確計算。
(2 1)多功能機載軍用雷達，體積和質量相對小，適于安裝在戰斗機前端，具有執行大量不同的雪一空和空地任務的功能。
以上是對雷達過去一些主要發展的一點觀點。其他人或許有不同的看法。并非每種重大的雷達成就都包括在內。如果包括本書其他章節的內容，這個列表可能會更長并包含更多的例子。但是這個列表己足以顯示出對雷達性能改進很重要的進展類型。