組合專機-汽車變速箱兩端面液壓雙頭組合銑床的設計
組合專機-汽車變速箱兩端面液壓雙頭組合銑床的設計,組合,專機,汽車,變速箱,兩端,液壓,銑床,設計
畢 業 設 計（論 文）
英 文 文 獻 翻 譯
學生姓名：
林圣鎮
學 號：
0615011106
所在系部：
機械工程系
專業班級：
06gb機制1
指導教師：
周國柱(教授)
日 期：
2010年5月
被加工零件
圖號
A1
毛坯種類
鑄件
名稱
汽車變速箱兩端面液壓雙頭組合銑床的設計
毛坯重量
15kg
材料
灰鑄鐵
硬度
HT150
工序名稱
粗銑前后端面
工序號
15
序號
工序名稱
被加工件數量
加工長度（mm）
工作行程（mm）
切削速度（m/min）
轉速（r/min）
進給量（mm/min）
機動時間
輔助時間
共計
1
裝卸工件
1
0.50
0.50
2
左滑臺銑端面
快進
310
6300
0.05
0.05
對刀
0.010
0.010
銑左端面
4.5
320
110
46.7
160
2
2
快退
630
6300
0.1
0.1
3
右滑臺銑端面
快進
310
6300
0.025
對刀
0.010
銑右端面
4.5
320
110
46.7
160
2
快退
630
6300
0.1
備注
裝卸工件時間取決于操作者的熟練程度。本機床計算時安裝卸一次為0.5min計算。
共計
2.8min
單位工時
2.8min
機床生產率
21.4件/小時
機床負荷率
71%
The research and development of modular machine tool
The machine is a combination of a generic components and special parts of the process of high concentrated special machine. It can be a (or more), more than parts, many, many processing. The machine can complete drilling, reaming,, boring, tapping, turning, milling, grinding and rolling process, high efficiency, stable machining accuracy.
Combination machine tools and other special machine tool, general, has the following features:
(1) combination machine tools on the general standard of components and parts accounted for all the machine parts of 70-80%, design and manufacture of short cycle, less investment, economic effect is good.
(2) the combination machine adopts many knives, and a high degree of automation, thus than general machine high production efficiency, stable product quality, low labor strength.
(3) is the universal modular machine tool parts after careful design and long-term production practice, and have special test batches, therefore the stable structure, manufacture, use and maintenance work and reliable.
(4) in combination machine processing parts, with special jig, tools and equipment, processing technology and equipment, the quality of on the technical level of operators.
(5) when the products processed update, using other types of special machine, its most parts to discard. In general, the combination of machine parts and standard parts can be reused, without further design and manufacturing.
(6) combination machine tools to represent combination machine tools, in order to adapt to the cycle of large-scale production needs.
Although there are many advantages of modular machine tool, but also disadvantages:
(1) the variability of modular machine tool, a universal reconfigured sometimes 10% ~ 20% of the parts can't reuse, and refitted. When large quantities
(2) universal modular machine tool parts not for a certain kind of machine design, it is a relatively wide adaptability. This will make the combination machine tools, special machine is a complex structure.
The classification of 1.2 combination machine tools
Combination machine tools and large portfolio is two kinds of small combination machine tools, they not only in volume and power are the size and type in structure and allocation, etc have great difference. Here, the configuration of the large combination machine tools. Large portfolio of machine configuration can be divided into three categories:
1.2.1 has fixed fixture were a combination machine tools
This kind of modular machine tool fixtures and workbench are stationary. To realize dynamic slide into motion, smooth realization of dynamic box on the cutting. According to the dynamic box and spindle box of resettlement way, and can be divided into the following kinds:
(1) the horizontal combination machine tools (horizontal) power box,
(2) vertical combination machine tools (power box installed vertically),
(3) tilted combination machine tools (power box installed); tilted
(4) complex combination machine tools (power box with the installation of two or more).
Given the fixture with multistage (portable) combination machine tools
This kind of combination machine tools installation in the jig straight moving workbench or turn on the job, and do according to certain takt time interval, make Labour movement or get conversion. This kind of machine configuration, common four.
(1) with the machine moving workbench, this kind of machine can make the fixture and workpiece beeline reciprocating movement.
(2) with the rotary worktable, this machine tool fixtures and workpiece axis of rotation, round vertical can turn on the work in each workstation are usually equipped with workpiece.
(3) drum machine, the machine tool for fixture and workpiece axis rotation around level can be. This machine of horizotal one-sided or horizontal commonly, but less USES double configuration of three. In addition, it also has FuSheShi except installation horizontal power components, perpendicular to the drum rebirth in the plane of the turn power components installed.
(4) the central pillar machine, the machine has the mesa of larger diameter annular rotary worktable. On the central installation, the installation power components, but also in the workbench around are installed power components, horizontal and fixture is installed in the rotary table, this machine is generally complex.
1.2.3 turret spindle box type combination machine tools
Turret spindle box type combination machine tools are divided into two classes: the uniaxial turret head type combination machine tools and multiaxial turret type combination machine tools. The former head of the turret each combination can be installed a rigid surfaces. The latter turret head each combination can be installed a spindle box surface. This machine general configuration types are:
(1) turn tower only realize spindle box by cutting movement, the processing components, by the slide realize feed movement,
(2) turn tower spindle box installed in turn on the slide spindle box tower, which can realize the cutting and feeding movement.
One turret and spindle box type combination machine tools may be composed of three type double or, at the same time, the two or three of workpiece surface processing.
130 combination machine tools of technology
Combination machine tools can be accomplished, milling process is flat surface, driving devicees, drilling, reaming, boring, reaming, tapping, deep hole drilling, economic, cutting, etc. Along with the development of integrated automation technology, the combination of complete machine can process is expanding constantly, except in the process, but also can complete car outside the circle, car, car indexing, cutting surface and thread, rolling, YuanZhuMian inside hole cut surface grinding, polishing, peace, and even honing, stamping, welding, and heat treatment, assembling, automatic measurement and check, etc.
The development direction of 1.4 combination machine tools
In recent years, combination machine tools in automobiles, tractors, diesel engine, motor, instruments, sewing machine, bicycle, valves, mining machinery, metallurgy, aviation, textile machinery and military department has won extensive use, some small batch production department also began to promote the use of. China in combination machine tools and the cycle will achieve rapid development, and its development direction for:
To improve the level 1.4.1 general parts
The main measure of general component level standard is: variety specification complete, the static and dynamic performance parameters, the technology of advanced high accuracy and precision, provides better.
Currently should pay attention to develop strong milling machine, high precision of high-power dynamic slippery 1ta series boring head with high precision, and adaptive sliding and small batch production, the fast speed in power components and supporting components.
Mechanical drive power components has stable performance, high reliability, etc. At present, mechanical drive power components used communication frequency conversion variable speed motors and dc servo motor, so as to make mechanical drive power components added new competition ability.
Power components with steel rail, using the ball screw, static guide and aero-static bearing, tooth-type belts and other new structure, bearing parts by welding structure, etc. Due to the increase of precision and parts of dynamic and static performance, which is obviously improve the machining precision workpiece surface roughness.
1.4.2 increase productivity
Currently combination machine tools and the cycle of increasing productivity, cycle time is generally 1 ~ 2 minutes, only 10 ~ 30 seconds. The main methods to improve productivity is to improve the machine tool layout, increase and decrease of machining tool, cutting dosages, improve the machining allowance, work to improve the reliability and shorten the assistant time etc. In order to reduce the loss of the cycle of the cycle, parking, electronic computers are flexible management of the cycle.
1.4.3 enlarge machining scope
Now combination machine tools and the cycle is completed a general has a few processes of workpieces, and is often used to finish all the processing procedure. Workpiece, Besides finished graphic milling, drilling past, reaming holes, tapping, economic, boring, has now expanded to finish machining, grinding and cutting, fine boring and machining (such as inspection, automatic assembly, cleaning, etc) and the classification of print test procedure.
1.4.4 improve the machining accuracy
Now in the combination machine tools and the cycle again into a lot of machining processes, such as: 1, fine boring hole processing position in 0.02 millimeters. In order to make the cycle can guarantee machining precision, stability and has been widely adopted automatically measuring tools and techniques that are automatically compensated, adjustable knives don't stop.
1.4.5 increased automation
Currently combination machine tools and the cycle is developing very rapidly, and more and more combination machine tools for composition, modular machine tool itself is the cycle is the development direction of automatic. Therefore, the key is to solve the workpiece clamp pressure automation and handling automation.
1.4.6 improve combination machine tools and automatic line
Small batch production to improve the productivity of some of the cabinet, in recent years the development process of adjustable knives of combination machine tools and automatic line, they are using digital control program. In the early development of many varieties, grouping processing combination machine tools and automatic line, also created automatically change and change automatic machine, combination of spindle box for small batch production process can be automatically replaced the spindle box on the combination machine tools. Using a tool that can complete the whole process of a workpiece machining, can play the role of a line. Especially the development of digital control program for the development of this kind of machine tools, creating more favourable conditions.
1.4.7 researchason super-mini combination machine tools
In order to adapt to the instrument industry small box processing need, creating super-mini combination machine tools are required. This machine by the hydraulic head more super-mini pneumatic configuration, small size, high efficiency, and can achieve high machining accuracy.
1.4.8 developing special combination machine tools and automatic line
Along with the development of technology, the combination of machine has been used to specific objects designed according to the general, but can be used as varieties of batch production, processing products according to your own user needs, process equipment, tools and machining certain objects can be composed of efficient tool.
組合機床的研究與發展
組合機床是由大量的通用部件和少量專用部件組成的工序集中的高效專用機床。它能夠?qū)σ环N（或多種）零件進行多刀、多軸、多面、多工位加工。在組合機床上可以完成鉆孔、擴孔、鉸孔、鏜孔、攻絲、車削、銑削、磨削及滾壓等工序，生產效率高，加工精度穩定。
組合機床與通用機床、其他專用機床比較，具有以下特點：
(1)組合機床上的通用部件和標準零件約占全部機床零、部件總量的70~80%，因此設計和制造的周期短，投資少，經濟效果好。
(2)由于組合機床采用多刀加工，并且自動化程度高，因而比通用機床生產效率高，產品質量穩定，勞動強度低。
(3)組合機床的通用部件是經過周密設計和長期生產實踐考驗的，又有專門廠成批制造，因此結構穩定、工作可靠，使用和維修方便。
(4)在組合機床上加工零件時，由于采用專用夾具、刀具和導向裝置等，加工質量靠工藝裝備保證，對操作工人的技術水平要求不高。
(5)當被加工產品更新時，采用其他類型的專用機床時，其大部部件要報廢。用組合機床時，其通用部件和標準零件可以重復利用，不必另行設計和制造。
(6)組合機床易于聯成組合機床自動線，以適應大規模的生產需要。
組合機床雖然有很多優點，但也還有缺點：
(1)組合機床的可變性較萬能機床低，重新改裝時有10%~20%的零件不能重復利用，而且改裝時勞動量較大。
(2)組合機床的通用部件不是為某一種機床設計的，它是具有較廣的適應性。這樣，就使組合機床的結構較專用機床稍為復雜些。
1.2組合機床的分類
組合機床有大型組合機床與小型組合機床兩大類，它們不僅在體積和功率上有大小之別，而且在結構和配置型式等方面也有很大的差異。這里主要說明大型組合機床的配置型式。大型組合機床的配置型式可分為三大類：
1.2.1具有固定式夾具的單工位組合機床
這類組合機床夾具和工作臺都固定不動。動力滑臺實現進給運動，滑臺上的動力箱實現切削主運動。根據動力箱和多軸箱的安置方式不同，又可分為以下幾種：
(1)臥式組合機床（動力箱水平安裝）；
(2)立式組合機床（動力箱垂直安裝）；
(3)傾斜式組合機床（動力箱傾斜安裝）；
(4)復合式組合機床（動力箱具有上述兩種以上的安裝狀態）。
1.2.2具有移動式夾具的（多工位）組合機床
這類組合機床的夾具安裝在直線移動工作臺或回轉工作臺上，并按照一定的節拍時間作間歇移動或轉動，使工位得到轉換。這類機床的配置型式，常見的有以下四種。
(1)具有移動工作臺的機床，這類機床的夾具和工件可作直線往復移動。
(2)具有回轉工作臺的機床，這種機床的夾具和工件可繞垂直軸線回轉，在回轉工作臺上每個工位通常都裝有工件。
(3)鼓輪式機床，這種機床的夾具和工件可繞水平軸線回轉。此種機床一般為臥式單面或臥式雙面，而較少采用三面配置。此外也有輻射式的，它除了安裝臥式動力部件外，還在垂直于鼓輪回轉的平面上安裝動力部件。
(4)中央立柱式機床，這種機床具有臺面直徑較大的環形回轉工作臺。在工作臺中央安裝立柱，立柱上安裝動力部件，而在工作臺的周圍還安裝有臥式動力部件，工件和夾具則安裝在回轉工作臺上，這種機床一般都是復合式的。
1.2.3轉塔多軸箱式組合機床
轉塔多軸箱式組合機床分為兩類：單軸轉塔動力頭式組合機床和多軸轉塔頭式組合機床。前者轉塔頭的每個結合面可安裝一個剛性主軸。后者轉塔頭的每個結合面可安裝一個多軸箱。這種機床一般配置型式有：
(1)轉塔式多軸箱只實現切削運動，被加工零件安裝在滑臺上，由滑臺實現進給運動；
(2)轉塔式多軸箱安裝在滑臺上，轉塔式多軸箱既實現切削主運動又實現進給運動。
其中，轉塔多軸箱式組合機床可能組成雙面式或三面式，同時對工件的兩、三個平面進行加工。
1.3組合機床的工藝范圍
組合機床可完成的工藝有銑平面、刮平面、車端面、鉆孔、擴孔、鏜孔、鉸孔、攻絲、倒锪窩、鉆深孔、切槽等。隨著綜合自動化技術的發展，組合機床可完成的工藝范圍也在不斷擴大，除了上述工藝外，還可完成車外圓、車錐面、車弧面、切削內外螺紋、滾壓孔、拉削內外圓柱面和平面、磨削、拋光、珩磨，甚至還可以進行沖壓、焊接、熱處理、裝配、自動測量和檢查等。
1.4組合機床的發展方向
近幾年組合機床在汽車、拖拉機、柴油機、電機、儀器、縫紉機、自行車、閥門、礦山機械、冶金、航空、紡織機械及軍工等部門已獲得廣泛的使用，一些中小批量生產部門也開始推廣使用。我國在組合機床及其自動線上將獲得較快的發展，其發展方向?yàn)椋?
1.4.1提高通用部件的水平
衡量通用部件水平的主要標準是：品種規格齊全，動、靜態性能參數先進，工藝性好，精度高和精度保持性好。
目前應注意開發適應強力銑削的大功率動力滑臺，高精度鏜削頭和高精度滑臺，以及適應中、小批生產的快調、速換動力部件和支承部件。
機械驅動的動力部件具有性能穩定，工作可靠等優點。目前，機械驅動的動力部件應用了交流變頻調速電機和直流伺服電機等，使機械驅動的動力部件增添了新的競爭能力。
動力部件采用鑲鋼導軌、滾珠絲杠、靜壓導軌、靜壓軸承、齒形皮帶等新結構，支承部件采用焊接結構等。由于提高了部件的精度和動、靜態性能，因而使被加工的工件精度明顯提高，表面粗糙度減小。
1.4.2提高生產率
目前組合機床及其自動線的生產率不斷提高，循環時間一般是1~2分鐘，有的只用10~30秒。提高生產率的主要方法是改善機床布局，增加同時加工的刀具，減少加工余量，提高切削用量，提高工作可靠性以及縮短輔助時間等。為了減少自動線的停車損失，提高自動線的柔性，采用電子計算機進行自動線的管理。
1.4.3擴大工藝范圍
現在組合機床及其自動線一般已不是完成一個工件的某幾道工序，而常常是用于完成工件的全部加工工序。除過去完成平面銑削、鉆孔、擴孔、锪孔、攻絲、粗鏜孔外，現在已擴大到能完成車削、磨削、拉削、精鏜以及非切削加工（如檢查、自動裝配、清洗、試驗以及打印分類等）工序。
1.4.4提高加工精度
現在在組合機床及其自動線上又納入了很多精加工工序，如進行1級精鏜，保證孔加工位置度在0.02毫米。為了使自動線能穩定地保證加工精度，已廣泛采用自動測量和刀具自動補償技術，保證調刀不停車。
1.4.5提高自動化程度
目前組合機床及其自動線發展十分迅速，越來越多的組合機床用于組成自動線，組合機床本身則是全自動方向發展的。為此，重點是解決工件夾壓自動化和裝卸自動化。
1.4.6提高組合機床及其自動線的可調性
為了提高中小批生產的一些箱體件的生產率，近幾年來發展了可調的多工序多刀具的組合機床及其自動線，它們大多采用數字程序控制。除早期發展的多品種、成組加工的組合機床及其自動線外，還創造了自動換刀和自動更換多軸箱的組合機床，還有用于加工中小批生產箱體零件的可自動更換對多軸箱的組合機床。用一臺這樣的機床就能完成一種工件的全部工序加工，能起到一條流水線的作用。特別是數字程序控制的發展，為發展這種機床創造了更有利的條件。
1.4.7創制超小型組合機床
為了適應儀器儀表工業小箱體加工需要，創制超小型組合機床是必需的。這種機床多由超小型氣動液壓頭配置而成，體積小，效率高，并能達到高的加工精度。
1.4.8發展專用組合機床及其自動線
隨著組合機床技術的發展，過去一直被認為需按具體加工對象專門設計，而是可以作為通用品種進行成批生產的，用戶根據自己加工產品的需要，配上刀具及工藝裝備，即可組成加工一定對象的高效機床。
閱讀書目
[1] 章宏甲.黃誼主編．液壓傳動[M]. 北京:機械工業出版社.1993
[2] 大連組合機床研究所編.組合機床設計第一冊[M]．北京:機械工業出版社.1975
[3] 大連組合機床研究所編.組合機床參考圖冊[M].北京:機械工業出版社.1975
[4] 彭文生等主編．機械設計[M]．華中理工大學出版社.2001
[5] 唐增寶等主編．機械設計課程設計[M]．華中理工大學出版社.1999
[6]沈陽工學院等編.組合機床設計[M]. 上海: 上?？茖W(xué)技術出版社.1985
[7] 大連組合機床研究所編.組合機床設計第二冊[M]．北京:機械工業出版社.1975
[8]金屬切削機床設計. 上海:上?？茖W(xué)技術文獻出版社[M].1986
[9]金屬切削機床(下冊). 北京:機械工業出版社[M].1990
[10]趙大興等主編.工程圖學 .湖北科學技術出版社[M].2005
[11] 左健民主編.液壓與氣壓傳動.機械工業出版社[M].2002
收藏