購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。?!咀ⅰ浚篸wg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。帶三維備注的都有三維源文件,由于部分三維子文件較多,店主做了壓縮打包,都可以保證打開的,三維預覽圖都是店主用電腦打開后截圖的,具體請見文件預覽,有不明白之處,可咨詢QQ:1304139763===========題目最后備注XX系列,只是店主整理分類,與內容無關,請忽視
沈陽理工大學學士學位論文
摘 要
本篇說明書中,主要是介紹了我這次設計的主要設計思路及設計過程。包括了兩套專用夾具的設計和刀具、量具的設計思路和設計過程,以及在致謝和參考文獻。
我的設計課題是機床支架的工藝工裝設計。設計的主要內容有:繪制零件圖、設計夾具、刀具、量具等。由目錄可詳細了解論文的內容。此次設計,綜合運用了本專業的各方面的專業知識,如《機械制圖》、《機械制造工藝學》、《機床夾具設計》……在這整個設計過程中進一步加深并鞏固了我這兩年所學的知識,令我感到受益匪淺,收獲頗豐。
由于個人能力和經驗有限,設計中會出現很多不足之處,希望各位老師給予指教。
關鍵詞:專用夾具;刀具;量具;機械制圖
Abstract
In brief this instruction booklet, mainly was introduced my design main design mentality and the design process. In addition two sets of jigs supposing with cutting tool, measuring instrument design mentality and design process, as well as appendix and reference booklist, concluding remark.
My design topic is machine tool support, s technological design. May in detail understand the paper by the table of contents the content. This design, the synthesis has utilized this specialized various aspects of specialized knowledge, like "Mechanical drawing", "Machine manufacture Technology", "Engine bed Jig Design"... ... Further deepened and has consolidated the knowledge which I studied in this instituted during recent two years. Because individual ability and the experience are limited, in the design must appear very many deficiency, hoping fellow teachers give advice.
Keyword:special fixture; measure; holding device; machining drawing
目 錄
引言……………………………………………………………………………………………1
第1章工藝規程設計…………………………………………………………………………2
1.1 零件分析 ………………………………………………………………………………2
1.2 確定毛坯、畫毛坯圖 …………………………………………………………………2
1.3 工藝規程設計 …………………………………………………………………………3
第2章工藝裝備設計…………………………………………………………………………14
2.1 夾具的概念 …………………………………………………………………………15
2.2 夾具的基本要求 ……………………………………………………………………15
2.3 夾具的設計方法和步驟 ……………………………………………………………15
第3章量具設計 ……………………………………………………………………………20
3.1 量規的種類和作用 …………………………………………………………………23
3.2 量規設計 ……………………………………………………………………………23
3.3 量規的技術要求 ……………………………………………………………………24
結論 …………………………………………………………………………………………25
致謝 …………………………………………………………………………………………26
參考文獻 ……………………………………………………………………………………27
附錄A(英文原文)…………………………………………………………………………28
附錄B(中文翻譯)…………………………………………………………………………33
III