接觸簧片沖壓模具設計【級進模】
接觸簧片沖壓模具設計【級進?！?級進模,接觸,簧片,沖壓,模具設計
畢業設計（論文）任務書
題目：接觸簧片沖裁模設計
系 名
專 業
學 號
學生姓名
指導教師
職 稱
年 月 日
一、原始依據（包括設計或論文的工作基礎、研究條件、應用環境、工作目的等。）
設計基礎：沖壓模具在現在工業生產中占有十分重要的地位。目前，沖壓模具的設計方法和設計步驟都已經形成了一定規律，而且，還有各種沖壓模具的典型結構。以沖壓工藝為基礎，根據沖壓模典型結構，再結合所給工件尺寸，設計一套沖裁模。
研究條件：一臺電腦， AutoCAD繪圖軟件，三維繪圖軟件。
應用環境：工廠生產。
工作目的：設計一套沖裁模，模具結構合理，生產的工件滿足精度要求，有使用價值。
二、參考文獻
[1]魏春雷、朱三武主編，模具專業畢業設計手冊，天津：天津大學出版社，2010
[2]夏巨諶、李志剛主編，中國模具工程大典，北京：電子工業出版社，2007
[3]鄧明主編，實用模具設計簡明手冊，北京：機械工業出版社，2006
[4]王秀鳳、萬良輝主編，冷沖壓模具設計與制造，北京：北京航空航天大學出版社，2005
[5]翁其金、徐新成主編，沖壓工藝及模具設計，北京：機械工業出版社，2009
[6]高錦張主編，塑性成形工藝與模具設計，北京：機械工業出版社，2010
[7]劉占軍編著，多工位級進模設計及實例精解，北京：化學工業出版社，2009
[8]薛啟翔主編，沖壓模具設計結構圖冊，北京：化學工業出版社，2005
[9]閻亞林主編，沖壓與塑壓成形設備，北京：高等教育出版社，2010
[10]周玲主編，沖模設計實例詳解，北京：化學工業出版社，2007
[11]劉占軍主編，沖壓排樣技巧，北京：化學工業出版社，2010
[12]宛強主編，沖壓模具設計及實例精解，北京：化學工業出版社，2008
[13]王鵬駒、成虹主編，沖壓模具設計師手冊，北京：機械工業出版社，2009
[14]張正修主編，沖壓技術實用數據速查手冊，北京：機械工業出版社，2009
[15]王立人、張輝主編，沖壓模設計指導，北京：北京理工大學出版社，2009
三、設計（研究）內容和要求（包括設計或研究內容、主要指標與技術參數，并根據課題性質對學生提出具體要求。）
1、編寫設計計算說明書，正文部分不少于15000字（格式及字號參照教務處相關要求）。
說明書主要內容：根據所給零件圖，對冷沖壓件工藝性分析，確定沖壓工藝方案及模具結構形式，對模具設計的計算，包括排樣圖設計及材料利用率的計算，工序壓力的計算及壓力中心的確定，工作零件刃口尺寸及公差的計算，模具主要零部件的設計與選用。
2、 用計算機繪制工程圖，折合零號圖紙應不少于2張。
繪圖內容：繪制模具裝配圖和主要零部件圖。
3、原始資料：
材料：錫磷青銅，
料厚：1.5mm
生產批量：大批量生產
指導教師（簽字）
年 月 日
審題小組組長（簽字）
年 月 日
Mold development trend
1.mold CAD / CAE / CAM being integrated, three-dimensional, intelligent and network direction
(1) mold software features integrated
Die software features of integrated software modules required relatively complete, while the function module using the same data model, in order to achieve Syndicated news management and sharing of information to support the mold design, manufacture, assembly, inspection, testing and production management of the entire process to achieve optimal benefits. Series such as the UK Delcam's software will include a surface / solid geometric modeling, engineering drawing complex geometry, advanced rendering industrial design, plastic mold design expert system, complex physical CAM, artistic design and sculpture automatic programming system, reverse engineering and complex systems physical line measurement systems.
(2) mold design, analysis and manufacture of three-dimensional
Two-dimensional mold of traditional structural design can no longer meet modern technical requirements of production and integration. Mold design, analysis, manufacturing three-dimensional technology, paperless software required to mold a new generation of three-dimensional, intuitive sense to design the mold, using three-dimensional digital model can be easily used in the product structure of CAE analysis, tooling manufacturability evaluation and CNC machining, forming process simulation and information management and sharing. Such as Pro / ENGINEER, UG and CATIA software such as with parametric, feature-based, all relevant characteristics, so that mold concurrent engineering possible. In addition, Cimatran company Moldexpert, Delcam's Ps-mold and Hitachi Shipbuilding of Space-E/mold are professional injection mold 3D design software, interactive 3D cavity, core design, mold base design configuration and typical structure . Australian company Moldflow realistic three-dimensional flow simulation software MoldflowAdvisers been widely praised by users and applications. China Huazhong University of Science have developed similar software HSC3D4.5F and Zhengzhou University, Z-mold software. For manufacturing, knowledge-based intelligent software function is a measure of die important sign of advanced and practical one. Such as injection molding experts Cimatron's software can automatically generate parting direction based parting line and parting surface, generate products corresponding to the core and cavity, implementation of all relevant parts mold, and for automatically generated BOM Form NC drilling process, and can intelligently process parameter setting, calibration and other processing results.
(3) mold software applications, networking trend
With the mold in the enterprise competition, cooperation, production and management, globalization, internationalization, and the rapid development of computer hardware and software technology, the Internet has made in the mold industry, virtual design, agile manufacturing technology both necessary and possible. The United States in its "21st Century Manufacturing Enterprise Strategy" that the auto industry by 2006 to achieve agile manufacturing / virtual engineering solutions to automotive dvelopment cycle shortened from 40 months to 4 months.
2 mold testing, processinge equipment to the precise, efficient, and multi-direction
(1) mold testing equipment more sophisticated, efficient
Sophisticated, complex, large-scale mold development, testing equipment have become increasingly demanding. Precision Mould precision now reached 2 ~ 3μm, more domestic manufacturers have to use Italy, the United States, Japan and other countries in the high-precision coordinate measuring machine, and with digital scanning. Such as Dongfeng Motor Mould Factory not only has the capacity 3250mm × 3250mm Italian coordinate measuring machine, also has a digital photography optical scanner, the first in the domestic use of digital photography, optical scanning as a means of spatial three-dimensional access to information, enabling the establishment from the measurement of physical → model output of engineering drawings → → the whole process of mold making, reverse engineering a successful technology development and applications. This equipment include: second-generation British Renishaw high-speed scanners (CYCLON SERIES2) can be realized and contact laser probe complementary probe, laser scanner accuracy of 0.05mm, scanning probe contact accuracy of 0.02 mm. Another German company GOM ATOS portable scanners, Japan Roland's PIX-30, PIX-4 desktop scanner and the United Kingdom Taylor Hopson's TALYSCAN150 multi-sensor, respectively Three-dimensional scanner with high speed, low-cost and functional composite and so on.
(2) CNC EDM
Japan Sodick linear motor servo drive using the company's AQ325L, AQ550LLS-WEDM have driven fast response, transmission and high positioning accuracy, the advantages of small thermal deformation. Switzerland Chanmier company NCEDM with P-E3 adaptive control, PCE energy control and automatic programming expert systems. Others also used the powder mixed EDM machining technology, micro-finishing pulse power and fuzzy control (FC) technologies.
(3) high-speed milling machine (HSM)
Milling is an important means of cavity mold. The low-temperature high-speed milling with the workpiece, cutting force is small, smooth processing, processing quality, processing efficiency (for the general milling process 5 to 10 times) and can process hard materials (<60HRC) and many other advantages. Thus in the mold processing more and more attention. Ruishikelang company UCP710-type five-axis machining center, machine tool positioning accuracy up to 8μm, home-made closed-loop vector control spindle with a maximum speed 42000r/min. Italy RAMBAUDI's high-speed milling, the processing range of up to 2500mm × 5000mm × 1800mm, speed up 20500r/min, cutting feed speed of 20m/min. HSM generally used large, medium-sized mold, such as motor cover mold, die casting mold, large plastic surface machining, the surface precision up to 0.01mm.
3 rapid economic modeling techniques
Shorten the product development cycle is an effective means of market competition to win one. Compared with the traditional mold process, fast economic modeling technology is a short molding cycle, the characteristics of low cost, precision, and life can meet the production needs, overall economic efficiency is more significant in the mold manufacturing technology, specifically the following main technology.
(1) rapid prototyping and manufacturing (RPM).
It consists of three-dimensional laser lithography (SLA); laminated profile manufacturing (LOM); laser powder sintering prototyping (SLS); Fused Deposition Molding (FDM) and three-dimensional printing forming technology (3D-P) and so on.
(2) the surface forming tooling. It refers to the use of spray, chemical corrosion, electroforming and new method for the formation of the cavity surface and a fine pattern technology.
(3) Casting forming tooling. There are bismuth tin alloy tooling, zinc alloy tooling, resin composite forming technology and silicon rubber mold molding technology.
(4) cold extrusion mold technology and ultra-molded shapes.
(5) multi-point forming technology.
(6) KEVRON steel blanking blanking tooling.
(7) mold blank rapid manufacturing technology. Mainly dry sand Mold Casting, Vacuum Mold Casting, Resin Sand Mold Casting Lost Wax Casting, and other technologies.
(8) Other aspects of technology. Such as the use of nitrogen gas spring pressure side, discharge, quick die technology, stamping unit technology, and cutting edge technology and solid surfacing edge inserts die casting technology.
4 mold materials and surface treatment technology developed rapidly
Industry to the level of mold, material application is the key. Due to improper selection and use of materials, causing premature die failure, which accounts for more than 45% failure die. In the mold material, commonly used cold work tool steel with CrWMn, Cr12, Cr12MoV and W6Mo5Cr4V2, flame hardened steel (such as Japan, AUX2, SX105V (7CrSiMnMoV), etc.; used a new type of hot work die steel American H13, Sweden QRO80M, QRO90SUPREME, etc.; used a pre-hardened plastic mold steel (such as the U.S. P20), age-hardening steel (such as the U.S. P21, Japan NAK55, etc.), heat treatment hardened steel (such as the United States, D2, Japan, PD613, PD555, Sweden wins the White 136, etc.), powder die steel (such as Japan KAD18 and KAS440), etc.; panel drawing die used HT300, QT60-2, Mo-Cr, Mo-V cast iron, large-scale mold with HT250. more regular use of Precision Die Hard Steel Results YG20 and other alloys and carbide. in the mold surface treatment, the main trends are: the infiltration of a single element to the multi-element penetration, complex permeability (such as TD method) development; by the general diffusion to the CVD, PVD, PCVD, ion penetration , the direction of ion implantation, etc.; can use the coating are: TiC, TiN, TiCN, TiAlN, CrN, Cr7C3, W2C, etc., while heat from the air treatment means to the development of vacuum heat treatment. In addition, the current strengthening of the laser, glow plasma Nitriding and electroplating (plating) enhanced anti-corrosion technologies are also more and more attention.
5 mold industry new techniques, new ideas and new models have been gradually recognized
As a result, additives in smaller systems must work harder because they have less time to interact with contaminants such as dirt and metal particles. The additives also have less time to demulsify weter that inevitably gets into hydraulic fluid through condensation or leakage. Unchecked, water in the fluid plugs filters and causes corrosion and pump wear.
Smaller hydraulic systems simply use less oil, so additives must have reserve performance. Additive suppliers continue to develop additives for the harsh environment and pressures of compact hydraulic systems. Examples include more thermally stable antiwear and better antioxidants to improve performance. These additives, in combination with higher quality base oils, have resulted in hydraulic fluids better suited to small systems.
Another cost-saving trend is extending the drain intervals---longer fluid life. In such cases, the additive package must have enough power in reserve---what is termed chemistry---to provide performance and durability despite severe applications and long overdue maintence.
Long-life hydraulic oils must also meet stringent OEM filtration requirements that include the ability to filter effectively when contaminated by water and sludge generated by oxidation and thermal degradation. Many hydraulic formulations commonly use detergents to keep systems clean.
As group number increases, so does cost. But higher-group-number base oils can extend equipment life due to lower volatility, better oxidation resistance, and less sensitivity to water in the system.
In addition, higher-group-number base oils contain less sulfur and have more molecules, both of which are better for equipment. Saturate level refers to the number of double bonds -or unsaturated molecules---present in an oil. Unsaturated molecules in Group 1 base oils serve as reaction points for oxidation, which can ultimately shorten hydraulic-oil life. Higher -group-number base oils, in contrast, have fower unstaturated molecules. Combined with efficient antioxidants, the result is better oxidative stability.
3, Additive package. Hydrauli fluids are made up of about 90% base oil and 1% or less additives. But thar one percent is critical. Factors that influence additive seliction include performance, compatibility, color, oddor, and economics.
As mentioned proviously, additives provide a number of properties, including antiwear and corrosion protection, They can also contain a demulsifier to separate water from the oil, so water can be drained from the system. This helps extend fluid life. And additives provide good thermal and oxidation stability.Properly formulated hydraulic oils provide variety of conditions.
In the forming process, the main function of composite stamping die, superplastic forming, plastic precision molding technology, plastic mold gas-assisted injection technology and hot runner technology, high-pressure injection molding technology. On the other hand, with the continuous development of advanced manufacturing technology and raise the level of mold industry as a whole, in the mold industry, there are some new design, production, management ideas and models. Concrete are: to adapt to the characteristics of mold-piece production flexible manufacturing technologies; to create the best management and effective teamwork, lean production; to enhance rapid response capabilities of Concurrent Engineering, Virtual Manufacturing and global agile manufacturing, manufacturing of new production networks philosophy; extensive use of standard parts common parts of the division of work mode of production; meet the environmental requirements of sustainable development and green design and manufacturing.
模具的發展趨勢
一、模具CAD/CAE/CAM正向集成化、三維化、智能化網絡化方向發展
1.1模具軟件功能集成化
?模具軟件功能的集成化要求軟件的功能模塊比較齊全，同時各功能模塊采用同一數據模型，以實現信息的綜合管理與共享，從而支持模具設計、制造、裝配、檢驗、測試及生產管理的全過程，達到實現最佳效益的目的。如英國Delcam公司的系列化軟件就包括了曲面/實體幾何造型、復雜形體工程制圖、工業設計高級渲染、塑料模設計專家系統、復雜形體CAM、藝術造型及雕刻自動編程系統、逆向工程系統及復雜形體在線測量系統等。集成化程度較高的軟件還包括：Pro/ENGINEER、UG和CATIA等。
??1.2模具設計、分析及制造的三維化
??傳統的二維模具結構設計已越來越不適應現代化生產和集成化技術要求。模具設計、分析、制造的三維化、無紙化要求新一代模具軟件以立體的、直觀的感覺來設計模具，所采用的三維數字化模型能方便地用于產品結構的CAE分析、模具可制造性評價和數控加工、成形過程模擬及信息的管理與共享。如Pro/ENGINEER、UG和CATIA等軟件具備參數化、基于特征、全相關等特點，從而使模具并行工程成為可能。另外，Cimatran公司的Moldexpert，Delcam公司的Ps-mold及日立造船的Space-E/mold均是3D專業注塑模設計軟件，可進行交互式3D型腔、型芯設計、模架配置及典型結構設計。澳大利亞Moldflow公司的三維真實感流動模擬軟件MoldflowAdvisers已經受到用戶廣泛的好評和應用。國內有華中理工大學研制的同類軟件HSC3D4.5F及鄭州工業大學的Z-mold軟件。面向制造、基于知識的智能化功能是衡量模具軟件先進性和實用性的重要標志之一。如Cimatron公司的注塑模專家軟件能根據脫模方向自動產生分型線和分型面，生成與制品相對應的型芯和型腔，實現模架零件的全相關，自動產生材料明細表和供NC加工的鉆孔表格，并能進行智能化加工參數設定、加工結果校驗等。
??1.3模具軟件應用的網絡化趨勢
?? 隨著模具在企業競爭、合作、生產和管理等方面的全球化、國際化，以及計算機軟硬件技術的迅速發展，網絡使得在模具行業應用虛擬設計、敏捷制造技術既有必要，也有可能。美國在其《21世紀制造企業戰略》中指出，到2006年要實現汽車工業敏捷生產/虛擬工程方案，使汽車開發周期從40個月縮短到4個月。
二、模具檢測、加工設備向精密、高效和多功能方向發展
2.1模具檢測設備的日益精密、高效
精密、復雜、大型模具的發展，對檢測設備的要求越來越高?，F(xiàn)在精密模具的精度已達2～3μm，目前國內廠家使用較多的有意大利、美國、日本等國的高精度三坐標測量機，并具有數字化掃描功能。如東風汽車模具廠不僅擁有意大利產3250mm×3250mm三坐標測量機，還擁有數碼攝影光學掃描儀，率先在國內采用數碼攝影、光學掃描作為空間三維信息的獲得手段，從而實現了從測量實物→建立數學模型→輸出工程圖紙→模具制造全過程，成功實現了逆向工程技術的開發和應用。這方面的設備還包括：英國雷尼紹公司第二代高速掃描儀(CYCLON SERIES2)可實現激光測頭和接觸式測頭優勢互補，激光掃描精度為0.05mm，接觸式測頭掃描精度達0.02mm。另外德國GOM公司的ATOS便攜式掃描儀，日本羅蘭公司的PIX-30、PIX-4臺式掃描儀和英國泰勒·霍普森公司TALYSCAN150多傳感三維掃描儀分別具有高速化、廉價化和功能復合化等特點。
?2.2數控電火花加工機床
日本沙迪克公司采用直線電機伺服驅動的AQ325L、AQ550LLS-WEDM具有驅動反應快、傳動及定位精度高、熱變形小等優點。瑞士夏米爾公司的NCEDM具有P-E3自適應控制、PCE能量控制及自動編程專家系統。另外有些EDM還采用了混粉加工工藝、微精加工脈沖電源及模糊控制(FC)等技術。
?2.3高速銑削機床(HSM)
銑削加工是型腔模具加工的重要手段。而高速銑削具有工件溫升低、切削力小、加工平穩、加工質量好、加工效率高(為普通銑削加工的5～10倍)及可加工硬材料(<60HRC)等諸多優點。因而在模具加工中日益受到重視。瑞士克朗公司UCP710型五軸聯動加工中心，其機床定位精度可達8μm，自制的具有矢量閉環控制電主軸，最大轉速為42000r/min。意大利RAMBAUDI公司的高速銑床，其加工范圍達2500mm×5000mm×1800mm，轉速達20500r/min，切削進給速度達20m/min。HSM一般主要用于大、中型模具加工，如汽車覆蓋件模具、壓鑄模、大型塑料等曲面加工，其曲面加工精度可達0.01mm。
三、快速經濟制模技術
?縮短產品開發周期是贏得市場競爭的有效手段之一。與傳統模具加工技術相比，快速經濟制模技術具有制模周期短、成本較低的特點，精度和壽命又能滿足生產需求，是綜合經濟效益比較顯著的模具制造技術，具體主要有以下一些技術。
(1)快速原型制造技術(RPM)。它包括激光立體光刻技術(SLA) ；疊層輪廓制造技術(LOM) ；激光粉末選區燒結成形技術(SLS) ；熔融沉積成形技術(FDM) 和三維印刷成形技術(3D-P)等。
(2)表面成形制模技術。它是指利用噴涂、電鑄和化學腐蝕等新的工藝方法形成型腔表面及精細花紋的一種工藝技術。
?(3)澆鑄成形制模技術。主要有鉍錫合金制模技術、鋅基合金制模技術、樹脂復合成形模具技術及硅橡膠制模技術等。
(4)冷擠壓及超塑成形制模技術。
(5)無模多點成形技術。
(6)KEVRON鋼帶沖裁落料制模技術。
(7)模具毛坯快速制造技術。主要有干砂實型鑄造、負壓實型鑄造、樹脂砂實型鑄造及失蠟精鑄等技術。
(8)其他方面技術。如采用氮?dú)鈴椈蓧哼?、卸料、快速換模技術、沖壓單元組合技術、刃口堆焊技術及實型鑄造沖模刃口鑲塊技術等。
四、模具材料及表面處理技術發展迅速
模具工業要上水平，材料應用是關鍵。因選材和用材不當，致使模具過早失效，大約占失效模具的45%以上。在模具材料方面，常用冷作模具鋼有CrWMn、Cr12、Cr12MoV和W6Mo5Cr4V2，火焰淬火鋼(如日本的AUX2、SX105V(7CrSiMnMoV)等；常用新型熱作模具鋼有美國H13、瑞典QRO80M、QRO90SUPREME等；常用塑料模具用鋼有預硬鋼(如美國P20)、時效硬化型鋼(如美國P21、日本NAK55等)、熱處理硬化型鋼(如美國D2，日本PD613、PD555、瑞典一勝白136等)、粉末模具鋼(如日本KAD18和KAS440)等；覆蓋件拉延模常用HT300、QT60-2、Mo-Cr、Mo-V鑄鐵等，大型模架用HT250。多工位精密沖模常采用鋼結硬質合金及硬質合金YG20等。在模具表面處理方面，其主要趨勢是：由滲入單一元素向多元素共滲、復合滲(如TD法)發展；由一般擴散向CVD、PVD、PCVD、離子滲入、離子注入等方向發展；可采用的鍍膜有：TiC、TiN、TiCN、TiAlN、CrN、Cr7C3、W2C等，同時熱處理手段由大氣熱處理向真空熱處理發展。另外，目前對激光強化、輝光離子氮化技術及電鍍(刷鍍)防腐強化等技術也日益受到重視。
五、模具工業新工藝、新理念和新模式逐步得到了認同
在成形工藝方面，主要有沖壓模具功能復合化、超塑性成形、塑性精密成形技術、塑料模氣體輔助注射技術及熱流道技術、高壓注射成形技術等。另一方面，隨著先進制造技術的不斷發展和模具行業整體水平的提高，在模具行業出現了一些新的設計、生產、管理理念與模式。具體主要有：適應模具單件生產特點的柔性制造技術；創造最佳管理和效益的團隊精神，精益生產；提高快速應變能力的并行工程、虛擬制造及全球敏捷制造、網絡制造等新的生產哲理；廣泛采用標準件通用件的分工協作生產模式；適應可持續發展和環保要求的綠色設計與制造等。
8
收藏