【機械類畢業論文中英文對照文獻翻譯】汽車舉升機液壓系統設計

【機械類畢業論文中英文對照文獻翻譯】汽車舉升機液壓系統設計,機械類畢業論文中英文對照文獻翻譯,機械類,畢業論文,中英文,對照,對比,比照,文獻,翻譯,汽車,舉升機,液壓,系統,設計 黑龍江工程學院本科生畢業設計 附錄B Hydraulic System Design In recent years, China's booming auto industry, especially the car trip Industry. For many years into the average family car has become a dream now Real. Vehicle maintenance industry also received a strong development of the various repair The rapid expansion of demand for equipment. Vehicle repair workshop is required lift The most important maintenance machinery. Car lift would be required of the role i s the level of maintenance of vehicles To a suitable height, so that the maintenance workers in the automotive chassis Carry out maintenance on the car below. Car lift columnwillgenerally be divided into And two kinds of shear-type [1]. No matter what kind of demand from its two Side of the vehicle lifting the level of synchronization can not occur cornering. And the car at the end of Bottom plate must be empty, so as to facilitatemaintenance operations workers. This Car lift required on both sides of the lifting device must be isolated , And that increase or decrease on both sides and must be fully synchronized. By The weight of the vehicle are generally larger, together with its own lifting device Weight lifting force larger demands and requirements of the landing and taking off a very flat Stability, it is generally used auto lift hydraulic drive system Action. Is on the authors developed a hydraulic system into the car lift Line introduced. auto lift hydraulic system design requirements Automotive lift hydraulic system, in addition to the requirements in certain areas Insiders on both sides of the vehicle from the car lift and llsimultaneously, but also For their car can stop at any height and to maintain the fixed faTo Workers have different height, different locations in the maintenance can be arbitrary Adjust the height, the most convenient way to carry out repairs. Therefore, the hydraulic system will Required to maintain the functional position. In addition, due to the weight of larger vehicles, Once the hydraulic system fails, gravity lift in the car The role will rapidly decline, may be the next car maintenance workers Pose a threat to safety of life, lift the car above have been The risk of break. Therefore, in order to prevent this from happening, give Or machine must have a mechanical locking device. Mechanical locks were installed by .In lifting the fuel tank and the piston rod at the top of the lateral arm associated with the lifting of sales Axis composed of two serrated rack. Installed outside the fuel tank Fixed rack, and installed in the pin on the rack with the Pistons Poles moved around the pin and to a certain point of the swing to do in order to To achieve separation and the two mesh rack. When the lifting arm at a location Status or failure of the hydraulic system, oil pressure falls below a certain value, the Rack will move in its own gravity and the role of the spring force with static gear Article mating, mechanical lock locked, so that lift arm will not drop, so that To ensure that the repair works and the car will not be dangerous. 附錄D 汽車舉升機液壓系統設計 近年來，我國汽車業蓬勃發展,尤其是轎車行業。多年來轎車進入普通家庭的夢想已經成為現實。汽車維修行業也隨之得到大力發展,各種維設備的需求迅速擴大. 汽車舉升機是維修廠必備的,也是最重要的維修機械.汽車舉升機的作用是將需要維修的汽車水平 提升到合適的高度,以便于維修工人在汽車底盤方對汽車進行維修. 汽車舉升機一般分為立柱式和剪式2種。盤下方必須為空的,以方便工人進行維修作業. 這就要求汽車舉升機兩側的舉升裝置必須是分離的,且兩側的上升或下降又必須是完全同步的. 由于汽車的重量一般都較大,再加上舉升裝置自身的重量,要求舉升力較大,而且升降時要求非常平 穩,所以汽車舉升機一般都采用液壓系統進行驅動. 現就作者開發的一種汽車舉升機液壓系統進行介紹. 汽車舉升機液壓系統,除要求能在一定的范圍內從汽車兩側將汽車同步舉升和下降外，還要求其能使汽車在任意高度停止并保持不動。 以便不同身高的工人，在維修不同置時可以任意調整高度,最方便地進行維修。因此,液壓系統必須具有定位保持功能。另外，因汽車的重量較大，一旦液壓系統出現故障，舉升機舉臂在汽車重力的作用下會迅速下滑，可能會對車下維修工人的生命安全造成威脅，舉升機上面的汽車也有被摔壞的危險。所以,為了防止這樣的情況發生,舉升機必須具有機械鎖定裝置。機械鎖由分別安裝在舉升油缸外側和活塞桿頂部與舉升臂相聯的銷軸上的兩根鋸齒形齒條組成. 安裝在油缸外側的齒條固定不動,而安裝在銷軸上的齒條則隨活塞桿上下移動,并且能繞銷軸做一定角度的擺動,以實現兩根齒條的分離和嚙合. 當舉升臂處于定位狀態或液壓系統出現故障、油壓低于一定數值的時候,動齒條就會在自身重力和彈簧力的作用下與靜齒條嚙合,機械鎖鎖死,使舉升臂不會下滑,這樣就確保維修工人和汽車不會出現危險。 4