帶孔L形件板材手柄的沖孔落料彎曲正裝連續級進模設計【沖壓模含14張CAD圖帶卡片】
【需要咨詢購買全套設計請加QQ1459919609】圖紙預覽詳情如下：
手柄沖孔落料彎曲正裝連續模設計 摘 要本設計題目為復合模具設計，體現了典型復合模具設計的要求，內容與方向。通過工藝分析，工藝方案的確定，確定了模具設計的方向， 對毛坯尺寸的確定，計算沖裁力，來計算壓力中心，選擇壓力機和壓力機的噸位。本設計運用了沖裁工藝及模具設計的基礎知識。首先，分析了板材的性能要求，為選去模具的類型做了準備，同時，也為凸，凹模的材料有了依據。后分析沖裁件的特征，確定了模具設計參數，選擇其他零件及卸料裝置。也為凸，凹模尺寸的計算有了根據。還有零件的加工工藝。關鍵詞: 復合模 凸模 凹模 Blanking punch bending handle is fitted for Die DesignAbstractThe design for the complex subject of mold design, mold compound typical design, content and direction. Through process analysis, process identification program to determine the direction of the mold design, determine the size of the rough calculation of punching power, to calculate the pressure center, select the tonnage presses and presses. The use of blanking process design and die design of the basic knowledge. First of all, the analysis of the performance requirements of the plate, in order to choose the type of mold do to prepare, at the same time, as well as convex, concave mold with the material basis. After the analysis of the characteristics of stamping parts, die design parameters to determine and select other parts and discharge devices. As well as convex, concave die size has been calculated in accordance with. There are parts of the processing technology. Key words: compound die punch die