滾針軸承自動裝配機的設計

滾針軸承自動裝配機的設計,軸承,自動,裝配,設計 ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 裝 ┊ ┊ ┊ ┊ ┊ 訂 ┊ ┊ ┊ ┊ ┊ 線 ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 吉林農業大學 畢業設計（論文）紙 滾針軸承自動裝配機 [摘要] 隨著現代科技的迅速發展，裝配自動化正在逐步發展成為當今世界裝配的發展主流，逐步取代人工的手工裝配。它已成為衡量一個國家機械發展水平的主要標志之一。自動裝配技術的重要性還在于促進產品制造系統的整體優化，生產率得以全面提高，用少量調整工人服務于一定數量的自動裝配設備，在一定程度上提高均衡生產水平。自動裝配不會因?yàn)楣と似冢韬?，情緒，技術不熟練等因素影響而造成產品質量缺陷或不穩定。時間表明，當達到一定批量的與手工裝配保持同一水平的自動化裝配將會使成本下降。同時，在許多情況下，裝配自動化所占用的生產面積比手工裝配完成同樣生產任務的工作面積要小的多。 本次設計是滾針軸承自動裝針機，首先把軸承碗選料排序，然后把滾針選料排序，二者在自動裝配機上實現自動裝配，從而得到滾針軸承。在這個過程中解決了與此相關的一些問題。 [關鍵詞] 滾針軸承 自動裝配 設計 Automatic Assembler Design of Universal Joint Bearing [Abstract]With the rapid development of modern science and technology, assembly automation is gradually developed into the mainstream of development in the world and gradually replace the manual assembly .It has become one of the main signs to measure the level of development of a national machinery. The importance of Automatic assembly technology is to promote products manufacturing system overall optimization .productivity can be overall improved. Minor adjustment workers are used for a certain number of automatic assembly equipment, in certain extent, It improves the balance in the level of production. Automatic assembly can not affect product quality resulting from errors or instability because of the factors of worker’s fatigue, neglect, emotional, unskilled. It has shown that when a certain amount of automated assembly will decline costs than manual assembly. At the same time, in many cases, the production assembly automation occupies a smaller area than manual assembly in completing the same task. In this paper, I had an automatic assembler design of universal joint bearing .In the first bearings bowl are classified, and then Roll needle are classified. The both achieve automatic assembly in the automatic assembler, and thus getting universal joint bearing. Some related problems are solved in the process . [Keywords] universal joint bearing automatic Assemble design 共 2 頁 第 2 頁