矩形開關外殼罩殼的注塑模具設計-抽芯塑料注射模含10張CAD圖

矩形開關外殼罩殼的注塑模具設計-抽芯塑料注射模含10張CAD圖,矩形,開關,外殼,罩殼,注塑,模具設計,塑料,注射,10,cad 注塑模具之模具設計與制造 模具是制造業的重要工藝基礎，在我國，模具制造屬于專用設備制造業。中國雖然很早就開始制造模具和使用模具，但長期未形成產業。直到20世紀80年代后期，中國模具工業才駛?cè)氚l(fā)展的快車道。近年，不僅國有模具企業有了很大發展，三資企業、鄉鎮（個體）模具企業的發展也相當迅速。 雖然中國模具工業發展迅速，但與需求相比，顯然供不應求，其主要缺口集中于精密、大型、復雜、長壽命模具領域。由于在模具精度、壽命、制造周期及生產能力等方面，中國與國際平均水平和發達國家仍有較大差距，因此，每年需要大量進口模具。 中國模具產業除了要繼續提高生產能力，今后更要著重于行業內部結構的調整和技術發展水平的提高。結構調整方面，主要是企業結構向?qū)I(yè)化調整，產品結構向著中高檔模具發展，向進出口結構的改進，中高檔汽車覆蓋件模具成形分析及結構改進、多功能復合模具和復合加工及激光技術在模具設計制造上的應用、高速切削、超精加工及拋光技術、信息化方向發展。 近年，模具行業結構調整和體制改革步伐加大，主要表現在，大型、精密、復雜、長壽命、中高檔模具及模具標準件發展速度高于一般模具產品；塑料模和壓鑄模比例增大；專業模具廠數量及其生產能力增加；“三資”及私營企業發展迅速；股份制改造步伐加快等。從地區分布來看，以珠江三角洲和長江三角洲為中心的東南沿海地區發展快于中西部地區，南方的發展快于北方。目前發展最快、模具生產最為集中的省份是廣東和浙江，江蘇、上海、安徽和山東等地近幾年也有較大發展。 雖然我國模具總量目前已達到相當規模，模具水平也有很大提高，但設計制造水平總體上落后于德、美、日、法、意等工業發達國家許多。當前存在的問題和差距主要表現在以下幾方面： （1）總量供不應求 國內模具自配率只有70%左右。其中低檔模具供過于求，中高檔模具自配率只有50%左右。 （2）企業組織結構、產品結構、技術結構和進出口結構均不合理 我國模具生產廠中多數是自產自配的工模具車間（分廠），自產自配比例高達60%左右，而國外模具超過70%屬商品模具。專業模具廠大多是“大而全”、“小而全”的組織形式，而國外大多是“小而?！?、“小而精”。國內大型、精密、復雜、長壽命的模具占總量比例不足30%，而國外在50%以上。2004年，模具進出口之比為3.7:1，進出口相抵后的凈進口額達13.2億美元，為世界模具凈進口量最大的國家。 （3）模具產品水平大大低于國際水平，生產周期卻高于國際水平 產品水平低主要表現在模具的精度、型腔表面粗糙度、壽命及結構等方面。 （4）開發能力較差，經濟效益欠佳 我國模具企業技術人員比例低，水平較低，且不重視產品開發，在市場中經常處于被動地位。我國每個模具職工平均年創造產值約合1萬美元，國外模具工業發達國家大多是15～20萬美元，有的高達25～30萬美元，與之相對的是我國相當一部分模具企業還沿用過去作坊式管理，真正實現現代化企業管理的企業較少。 隨著全球經濟的發展，新的技術革命不斷取得新的進展和突破，技術的飛躍和發展已經成為推動世界經濟增長的重要因素。市場經濟的不斷發展，促使工業產品越來越向多品種、小批量、高質量、低成本的方向發展，為了保持和加強產品在市場上的競爭力，產品的開發周期、生產周期越來越短，于是對制造各種產品的關鍵工藝裝備——模具的要求越來越苛刻。?一方面企業為追求規模效益，使得模具向著高速、精密、長壽命方向發展；另一方面企業為了滿足多品種、小批量、產品更新?lián)Q代快、贏得市場的需要，要求模具向著制造周期短、成本低的快速經濟的方向發展。計算機、激光、電子、新材料、新技術的發展，使得快速經濟制模技術如虎添翼，應用范圍不斷擴大，類型不斷增多，創造的經濟效益和社會效益越來越顯著。??快速經濟制模技術與傳統的機械加工相比，具有制模周期短、成本低、精度與壽命又能滿足生產上的使用要求，是綜合經濟效益比較顯著的一類制造模具的技術，概括起來，有以下幾種類別快速凝固加工技術 表面成型制模技術澆鑄成型制模技術擠壓成型技術? 快速凝固加工工藝現在應永最多的是快速凝固加工工藝。 快速凝固加工工藝（RSP），是一種適合生產注塑模具和沖壓模具的噴射成形技術。這種方法把快速凝固加工和網狀材料加工結合在一個單步執行。從CAD軟件到高精度工具鋼所使用的一個合適的快速原型（RP）技術解釋了一般概念上所涉及模具設計轉換，如立體平板印刷。一般是用氧化鋁或熔融石英把一個模板轉變?yōu)橐粋€(gè)澆注陶瓷。緊接著是用噴射成形噴一層厚厚的工具鋼（或其它合金）沉積物在模板上的方式獲得所需的形狀、表面紋理和細節。由此合成的金屬塊冷卻到室溫與模具分離。通常，沉積物的外表面被加工成方形，在一個控股塊中能夠被用來作為插入物，如MUD結構[5]。在一個機器工作的情況下，加工總周轉時間大約是3天。注塑模具和沖壓模具的這種生產方式已被用于塑料注塑和沖壓模具的原型和生產運行。 快速凝固加工工藝一個很大的好處是，它讓制造注塑模具和沖壓模具的過程成為設計周期前期的一部分。真正的原型零件用相同的生產加工計劃可以被制成預定形狀、尺寸和性能。若零件是合格的，它能像普通零件一樣被用于生產加工。使用數字化資料庫和RP技術可以很容易的修改設計上的內容。 實驗步驟 氧化鋁基陶瓷（Cotronics780[6]）是漿體通過硅橡膠模具或格式機冷凍模具鑄造的。完成后，陶瓷模型脫離模具，在干燥室烘干并冷卻到室溫。H13工具鋼是由在內部設計和建造的溫度約100°C、壓力由有工作臺刻度的收斂/發散噴霧嘴控制的氮?dú)獗Ｗo(hù)層中誘導融化的。噴霧裝置在惰性氣體中能最大限度地減少漂浮狀態的氧化液滴，因?yàn)樗鼈兇娣诺募庸つＪ奖嚷蚀蠹s是200公斤/小時。氣體到金屬的質量流量比大約是0.5。 對于延伸性和硬度的要求，噴射成形材料用電火花加工來去除表面0.05毫米厚的熱影響區。在沒有氮?dú)獾幕馉t中對樣品進行熱處理。為防止脫碳，每個涂有氧化硼的樣品都放置在一個密封的金屬箔包內。把樣品放在400至700°C的溫度范圍內人工老化，隨后空冷。常規熱處理H13鋼的是在1010°C的溫度持續30分鐘使它奧氏體化，隨后空冷，再在538°C的溫度兩次回火。 在室溫下，微硬度測量使用的是平均每10微刻度讀數的M型維氏硬度測試儀。工具鋼被腐蝕（3％硝酸浸蝕液）的微細結構的光學評估使用奧林巴斯的PME-3金相顯微照片和安瑞1830年電子掃描顯微鏡。相成分通過能量分散光學（EDS）分析。超范圍噴涂粉末的分析由麥奇克系列微粒分析器在來篩去200微米的粉末樣品覆蓋的粗糙表面。樣品密度由利用阿基米德原理工作的梅特勒天平（型號AE100）的排水量來測試。 用INEEL（國家工程與環境實驗室）開發的一維計算機章程用來評價多相流在自由射流噴嘴的表現。該章程的基本數值技術解決了穩態氣流場通過合適網格，全氣動和強力耦合之間的水滴和運輸氣體的保守變量的方法和采用液滴相的拉格朗日公式。液態金屬噴射系統耦合的氣體力學，包括熱傳遞和摩擦在內。該章程還包括一個允許液滴冷卻和升溫的非平衡凝固模型。該章程用于描述用射流噴嘴噴出的氣體和霧化液滴的溫度和速度變化情況。 粒子和氣體的狀態 圖1給出了噴射H13工具鋼的粒子聚集頻率和累積頻率分布圖。中央塊狀直徑被確定的56微米為插補尺寸的50％的累積頻率。這些面積平均直徑和體積平均直徑是分別被計算出的53微米和139微米。幾何標準偏差是1.8，sd=(d84/d16)1/2 ，d84和d16是粒子直徑相應的84％和16％的累積量。 圖1 噴射H13工具鋼的粒子聚集頻率和累積頻率分布 圖2給出了在射流噴嘴里多相流場速度的計算結果（圖2a），和H13工具鋼的凝固體分?jǐn)?shù)線（圖2b）。氣體速度增長至激震前沿位置時會急劇下降，最終在噴嘴外成倍衰退。小水滴很容易被速度場干擾，在噴嘴內加速噴嘴外減速。在達到其終級速度后，較大的水滴（～150微米）因?yàn)槠漭^大的動力受流場干擾較小。 眾所周知，目前的噴射成形高速粒子在噴嘴（103-106開/秒）和大部分沉積物（1-100開/分）的冷卻速度[7]。大多數粒子在噴射中經歷了復輝而造成的凝固體分?jǐn)?shù)大約是0.75。計算出的從噴嘴噴出的或小（～30微米）或大（～150微米）的凝固體分?jǐn)?shù)。 圖2 氣體和微粒在射流噴嘴里多相流場。(a)速度分布圖 (b)凝固體分?jǐn)?shù)線 噴射成形沉積 這種高溫提取率模式降低了因腐蝕而影響工具表面質量。這是相對靈活的，澆注陶瓷材料的模式將取代難以令人滿意的常規金屬鑄造過程。通過合適的加工條件，噴射成形模具模式可以制造出優質的表面質量。表面粗糙度因成型表面的質量而定。商業漿體生產的適合許多成型應用的鑄造陶瓷的表面粗糙度大約是1微米。沉積工具鋼在鋼化玻璃上產生的定向反射面拋光粗糙度大約是0.076微米。在初電流階段，一個普通的機床來重復性空間噴射成形模具大約是±0.2％。 化學性質 H13工具鋼的化學性質要求是使材料承受溫度、壓力、磨損和熱循環等要求苛刻的應用，如沖壓模具。這是最流行的沖壓模具合金也是全球第二受歡迎的塑料注塑工具鋼。這種鋼以低含碳量（0.4％）來提高韌性，以中等含鉻量（5％）來提供良好的抗高溫軟化性，以1％的硅含量來改善抗高溫氧化性，以少量鉬和釩（約1％）形成穩定的碳化物來提高耐磨性[8]。噴射成形前后對H13工具鋼的成分分析，說明在合金補充后沒有顯著的變化。 商業用的鍛造鐵素體工具鋼因?yàn)殇撹F廠的鑄塊慢慢冷卻形成粗糙碳化物而不能被沉淀硬化。與此相反，快速凝固的H13工具鋼因?yàn)楹辖鹪黾拥脑蛟诤艽蟪潭壬辖鉀Q了這個問題，并更均勻地分布于模型[9-11]。其性能可以被人工老化或常規熱處理改變。 人工老化的一個好處是它繞開常規熱處理過程中具體的容積變化而導致的工具變形的發生。這些具體的容積的變化發生在從奧氏體向鐵素體轉為回火馬氏體的模型轉換階段，必須在模具設計的初期說明。然而，不是總能得到可靠預測的。補充的這部分，從設計和生產的角度看可能是可取的，經常不包括像材料在淬火中奧氏體化或變形時有大幅衰退的趨勢。因?yàn)樗鼪]有相變，噴射成形工具鋼不遵守人工老化期間的工具失真。 6 外文翻譯： Injection moulding for Mold Design and Manufacture The mold is the manufacturing industry important craft foundation, in our country, the mold manufacture belongs to the special purpose equipment manufacturing industry. China although very already starts to make the mold and the use mold, but long-term has not formed the industry. Straight stabs 0 centuries 80's later periods, the Chinese mold industry only then drives into the development speedway. Recent years, not only the state-owned mold enterprise had the very big development, the three investments enterprise, the villages and towns (individual) the mold enterprise's development also quite rapidly. Although the Chinese mold industrial development rapid, but compares with the demand, obviously falls short of demand, its main gap concentrates precisely to, large-scale, is complex, the long life mold domain. As a result of in aspect and so on mold precision, life, manufacture cycle and productivity, China and the international average horizontal and the developed country still had a bigger disparity, therefore, needed massively to import the mold every year . The Chinese mold industry except must continue to sharpen the productivity; from now on will have emphatically to the profession internal structure adjustment and the state-of-art enhancement. The structure adjustment aspect, mainly is the enterprise structure to the specialized adjustment, the product structure to center the upscale mold development, to the import and export structure improvement, center the upscale automobile cover mold forming analysis and the structure improvement, the multi-purpose compound mold and the compound processing and the laser technology in the mold design manufacture application, the high-speed cutting, the super finishing and polished the technology, the information direction develops . The recent years, the mold profession structure adjustment and the organizational reform step enlarges, mainly displayed in, large-scale, precise, was complex, the long life, center the upscale mold and the mold standard letter development speed is higher than the common mold product; The plastic mold and the compression casting mold proportion increases; Specialized mold factory quantity and its productivity increase; "The three investments" and the private enterprise develops rapidly; The joint stock system transformation step speeds up and so on. Distributes from the area looked, take Zhujiang Delta and Yangtze River delta as central southeast coastal area development quickly to mid-west area, south development quickly to north. At present develops quickest, the mold produces the most centralized province is Guangdong and Zhejiang, places such as Jiangsu, Shanghai, Anhui and Shandong also has a bigger development in recent years. Although our country mold total quantity had at present achieved the suitable scale, the mold level also has the very big enhancement, after but design manufacture horizontal overall rise and fall industry developed country and so on Yu De, America, date, France, Italy many. The current existence question and the disparity mainly display in following several aspects: (1) The total quantity falls short of demand Domestic mold assembling one rate only, about 70%. Low-grade mold, center upscale mold assembling oneself rate only has 50% about. (2) The enterprise organizational structure, the product structure, the technical structure and the import and export structure does not gather In our country mold production factory to be most is from the labor mold workshop which produces assembles oneself (branch factory), from produces assembles oneself the proportion to reach as high as about 60%, but the overseas mold ultra 70% is the commodity mold. The specialized mold factory mostly is "large and complete", "small and entire" organization form, but overseas mostly is "small but", "is specially small and fine". Domestic large-scale, precise, complex, the long life mold accounts for the total quantity proportion to be insufficient 30%, but overseas in 50% above 2004 years, ratio of the mold import and export is 3.7:1, the import and export balances the after net import volume to amount to 1.32 billion US dollars, is world mold net import quantity biggest country . (3) The mold product level greatly is lower than the international standard The production cycle actually is higher than the international water broad product level low mainly to display in the mold precision, cavity aspect and so on surface roughness, life and structure. (4) Develops the ability badly, economic efficiency unsatisfactory our country mold enterprise technical personnel proportion low The level is lower, also does not take the product development, and frequently is in the passive position in the market. Our country each mold staff average year creation output value approximately, ten thousand US dollars, overseas mold industry developed country mostly 15 to10, 000 US dollars, some reach as high as 25 to10, 000 US dollars, relative is our country quite part of molds enterprises also continues to use the workshop type management with it, truly realizes the enterprise which the modernized enterprise manages few To create the above disparity the reason to be very many, the mold long-term has not obtained the value besides the history in as the product which should have, as well as the most state-owned enterprises mechanism cannot adapt the market economy, but also has the following several reasons: . The mold material performance, the quality and the variety question often can affect the mold quality, the life and the cost, the domestically produced molding tool steel and overseas imports the steel products to compare has a bigger disparity. Plastic, plate, equipment energy balance, also direct influence mold level enhancement. RSP Tooling Rapid Solidification Process (RSP) Tooling, is a spray forming technology tailored for producing molds and dies [2-4]. The approach combines rapid solidification processing and netshape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica. This is followed by spray forming a thick deposit of tool steel (or other alloy) on the pattern to capture the desired shape, surface texture and detail. The resultant metal block is cooled to room temperature and separated from the pattern. Typically, the deposit’s exterior walls are machined square, allowing it to be used as an insert in a holding block such as a MUD frame [5]. The overall turnaround time for tooling is about three days, stating with a master. Molds and dies produced in this way have been used for prototype and production runs in plastic injection molding and die casting. An important benefit of RSP Tooling is that it allows molds and dies to be made early in the design cycle for a component. True prototype parts can be manufactured to assess form, fit, and function using the same process planned for production. If the part is qualified, the tooling can be run in production as conventional tooling would. Use of a digital database and RP technology allows design modifications to be easily made. Experimental Procedure An alumina-base ceramic (Cotronics 780 [6]) was slurry cast using a silicone rubber master die, or freeze cast using a stereolithography master. After setting up, ceramic patterns were demolded, fired in a kiln, and cooled to room temperature. H13 tool steel was induction melted under a nitrogen atmosphere, superheated about 100°C, and pressure-fed into a bench-scale converging/diverging spray nozzle, designed and constructed in-house. An inert gas atmosphere within the spray apparatus minimized in-flight oxidation of the atomized droplets as they deposited onto the tool pattern at a rate of about 200 kg/h. Gas-to-metal mass flow ratio was approximately 0.5. For tensile property and hardness evaluation, the spray-formed material was sectioned using a wire EDM and surface ground to remove a 0.05 mm thick heat-affected zone. Samples were heat treated in a furnace that was purged with nitrogen. Each sample was coated with BN and placed in a sealed metal foil packet as a precautionary measure to prevent decarburization.Artificially aged samples were soaked for 1 hour at temperatures ranging from 400 to 700°C, and air cooled. Conventionally heat treated H13 was austenitized at 1010°C for 30 min., air quenched, and double tempered (2 hr plus 2 hr) at 538°C. Microhardness was measured at room temperature using a Shimadzu Type M Vickers Hardness Tester by averaging ten microindentation readings. Microstructure of the etched (3% nital) tool steel was evaluated optically using an Olympus Model PME-3 metallograph and an Amray Model 1830 scanning electron microscope. Phase composition was analyzed via energy-dispersive spectroscopy (EDS). The size distribution of overspray powder was analyzed using a Microtrac Full Range Particle Analyzer after powder samples were sieved at 200 μm to remove coarse flakes. Sample density was evaluated by water displacement using Archimedes’ principle and a Mettler balance (Model AE100). A quasi 1-D computer code developed at INEEL was used to evaluate multiphase flow behavior inside the nozzle and free jet regions. The code's basic numerical technique solves the steadystate gas flow field through an adaptive grid, conservative variables approach and treats the droplet phase in a Lagrangian manner with full aerodynamic and energetic coupling between the droplets and transport gas. The liquid metal injection system is coupled to the throat gas dynamics, and effects of heat transfer and wall friction are included. The code also includes a nonequilibrium solidification model that permits droplet undercooling and recalescence. The code was used to map out the temperature and velocity profile of the gas and atomized droplets within the nozzle and free jet regions. Results and Discussion Spray forming is a robust rapid tooling technology that allows tool steel molds and dies to be produced in a straightforward manner. Each was spray formed using a ceramic pattern generated from a RP master. Particle and Gas Behavior Particle mass frequency and cumulative mass distribution plots for H13 tool steel sprays are given in Figure 1. The mass median diameter was determined to be 56 μm by interpolation of size corresponding to 50% cumulative mass. The area mean diameter and volume mean diameter were calculated to be 53 μm and 139 μm, respectively. Geometric standard deviation, sd=(d84/d16)? , is 1.8, where d84 and d16 are particle diameters corresponding to 84% and 16% cumulative mass in Figure 1. Figure1. Cumulative mass and mass frequency plots of particles in H13 tool step sprays. Figure2 gives computational results for the multiphase velocity flow field (Figure 2a), and H13 tool steel solid fraction (Figure2b), inside the nozzle and free jet regions. Gas velocity increases until reaching the location of the shock front, at which point it precipitously decreases, eventually decaying exponentially outside the nozzle. Small droplets are easily perturbed by the velocity field, accelerating inside the nozzle and decelerating outside. After reaching their terminal velocity, larger droplets (?150 μm) are less perturbed by the flow field due to their greater momentum. It is well known that high particle cooling rates in the spray jet (103-106 K/s) and bulk deposit (1-100 K/min) are present during spray forming [7]. Most of the particles in the spray have undergone recalescence, resulting in a solid fraction of about 0.75. Calculated solid fraction profiles of small (?30 μm) and large (?150 μm) droplets with distance from the nozzle inlet, are shown in Figure 2b. Spray-Formed Deposits This high heat extraction rate reduces erosion effects at the surface of the tool pattern. This allows relatively soft, castable ceramic pattern materials to be used that would not be satisfactory candidates for conventional metal casting processes. With suitable processing conditions, fine surface detail can be successfully transferred from the pattern to spray-formed mold. Surface roughness at the molding surface is pattern dependent. Slurry-cast commercial ceramics yield a surface roughness of about 1 μm Ra, suitable for many molding applications. Deposition of tool steel onto glass plates has yielded a specular surface finish of about 0.076 μm Ra. At the current state of development, dimensional repeatability of spray-formed molds, starting with a common master, is about ±0.2%. Figure 2. Calculated particle and gas behavior in nozzle and free jet regions. (a) Velocity profile.(b) Solid fraction. Chemistry The chemistry of H13 tool steel is designed to allow the material to withstand the temperature, pressure, abrasion, and thermal cycling associated with demanding applications such as die casting. It is the most popular die casting alloy worldwide and second most popular tool steel for plastic injection molding. The steel has low carbon content (0.4 wt.%) to promote toughness, medium chromium content (5 wt.%) to provide good resistance to high temperature softening, 1 wt% Si to improve high temperature oxidation resistance, and small molybdenum and vanadium additions (about 1%) that form stable carbides to increase resistance to erosive wear[8]. Composition analysis was performed on H13 tool steel before and after spray forming.Results, summarized in Table 1, indicate no significant variation in alloy additions. Microstructure The size, shape, type, and distribution of carbides found in H13 tool steel is dictated by the processing method and heat treatment. Normally the commercial steel is machined in the mill annealed condition and heat treated (austenitized/quenched/tempered) prior to use. It is typically austenitized at about 1010°C, quenched in air or oil, and carefully tempered two or three times at 540 to 650°C to obtain the required combination of hardness, thermal fatigue resistance, and toughness. Commercial, forged, ferritic tool steels cannot be precipitation hardened because after electroslag remelting at the steel mill, ingots are cast that cool slowly and form coarse carbides. In contrast, rapid solidification of H13 tool steel causes alloying additions to remain largely in solution and to be more uniformly distributed in the matrix [9-11]. Properties can be tailored by artificial aging or conventional heat treatment. A benefit of artificial aging is that it bypasses the specific volume changes that occur during conventional heat treatment that can lead to tool distortion. These specific volume changes occur as the matrix phase transforms from ferrite to austenite to tempered martensite and must be accounted for in the original mold design. However, they cannot always be reliably predicted. Thin sections in the insert, which may be desirable from a design and production standpoint, are oftentimes not included as the material has a tendency to slump during austenitization or distort during quenching. Tool distortion is not observed during artificial aging of spray-formed tool steels because there is no phase transformation. 8