洗面奶瓶蓋注射模設計【護手霜瓶蓋】【一模兩腔】【說明書+CAD】

購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814

南京理工大學泰州科技學院 畢業設計(論文)外文資料翻譯 系　　部： 機械工程系 專 業： 機械工程及自動化 姓 名： 王 鋒 學 號： 05010230 外文出處： 中國機械資訊網 BBS.CMIW.CN 附 件： 1.外文資料翻譯譯文；2.外文原文。 指導教師評語： 譯文基本符合翻譯原文,個別詞匯不符合語境。語句較為通順，條理比較清楚，專業用語翻譯基本恰當，符合中文語法，整體翻譯質量較好。 簽名： 年 月 日 附件1：外文資料翻譯譯文 在注塑模應用方面，外形電鑄鎳的技術注釋 摘要 在過去幾年，快速成型技術及快速模具在發達國家已廣泛應用。在這篇文章中,作為一種范例，分析電芯塑料注射模具。通過快速成型，利用差分系統得到鎳殼模型。主要目的是分析鎳殼力學特征，學習不同方面的金相組織、硬度、內壓，失敗的可能性。以這些特色的有關參數生產鎳殼電設備，終于得到了一個注塑模具核心部分。 關鍵詞：電鍍； 電制；顯微組織； 鎳 文章概要 1. 引言 2. 注塑模具制造過程 3. 電鑄殼獲?。涸O(shè)備 4. 獲得硬度 5. 金相組織 6. 內壓 7. 測試的注塑模具 8. 結論 1．引言 現代工業遇到的最重要的挑戰之一是在很短的時間內向消費者提供更好的產品。因此,現代工業必須有更強的競爭性和適應更合理的生產成本。 毫無疑問，結合時間和質量并不容易,因?yàn)樗麄兘?jīng)常互相變換。生產系統的科技進步，在方式將可更有效和可行的促進組合,例如,如果是演化的觀測系統和注塑技術、我們得出的結論是事實上可以用很少的時間和高質量把新產品推向市場。在模具制造領域中，先進的快速模具制造技術有可能改善設計和制造過程注入部分。快速模具制造技術基本上是由程序集中組成，在短短的時間里，以可接受的精度水平使我們獲取小型系列的塑料模具零件。其應用領域不僅包括制作塑膠件注，而且他們研制并創造了最高產量。 本文包括在廣泛試圖研究確定分析測試和建議的科研第一線，在產業層次形成從注塑模具獲取鎳殼核心的可能性，同時用差分模型快速成型設備取得了初步的模型。 也將不得不說，無數業內人士事前并沒有應用任何新電鑄技術，但很大程度上，在快速模具的生產技術上使用這種試圖調查研究工作.，運用所有準確，制度化的方式方法并提出了工作。 2．注塑模具制造過程 核心是透過電進程的鎳殼。這是一個主管充滿金屬環氧樹脂的一核心板塊。模具(圖1)制造時可以直接注射A型多用標本，確定SO3167標準的甲狀旁腺恩目的是要確定這個試樣的力學性能和通過常規手段收集工業材料。 圖1注塑模具制造與電核心 根據這一方法研制工作，該階段取得核心有以下幾方面： (一) CAD系統預期目標的設計 (二) 快速原型設備制造模型(頻分多路復用)。該材料將被用于ABS塑料 (三) 以以往的模式生產事前已經涂了導電涂料的鎳電殼(必須有導電) (四) 從模型中清理殼牌 (五) 生產背面填充著隨著銅管與冷凍槽流動具有抗高溫殼牌環氧樹脂的核 心 注塑模具有兩個空洞，他們一個是電加工的核心，另一個是直接在機械上移動壓板。因此，它獲得了與同一工具及同一工藝條件同時在空洞里注入兩種不同的標本制造技術。 3．電鑄殼獲?。涸O(shè)備 電鍍是一個電化學過程中的化學變化, 當電流通過，它起源于電解質。該電解槽是由金屬鹽溶液淹沒兩個電極，一個陽極(鎳)、陰極(示范)。通過來自一定強度的直流電。當電流流經電路，目前在溶液中金屬離子轉化為原子，堆積于陰極或多或少的創造沉淀層。 這項工作采用的鍍液是由鎳、磺酸集中在400 毫升/公升，氯化鎳(10微克/公升)、硼酸(50微克/公升),allbrite SLA (30立方厘米/公升),703allbrite(2立方厘米/公升)。這種合成物的選擇主要取決于我們打算的應用類型即注塑模具，即使注射了玻璃纖維?；撬徭囎屛覀儷@得可以接受的殼內壓 (測試結果，不同工藝條件，不高于50兆帕和2兆帕左右最佳條件)。 不過這種程度的內部壓力也是使用添加劑Allbrite SLA強硝酸脂、甲醛水溶液產生的后果。這種添加劑當允許較小殼顆粒增加阻力。703allbrite是降解水溶液以減少表面腐蝕。氯化鎳,盡管內壓有害，增強導電溶液中的金屬均勻分布在陰極。硼酸作為pH值的緩沖。一旦已確定浴，有效驗的參數測試改變不同條件過程的電流密度(在1至22a/立方分米)，溫度(35至55℃)和pH值, 部分的改變鍍液組成。 4．獲得硬度 在測試期間已獲得一個非常有趣的結論，對不同程度硬度的鎳殼一直保持在相當高的穩定價值。在圖2，在pH4±0.2，攝氏45℃時，可以觀察到電流密度值為2.5和22℃之間。硬度值的范圍從高壓540至580。如果pH值降為3.5，氣溫下降55℃，硬度值的范圍從高壓520以上至高壓560以下。由磺酸鎳組成的這一特點使得測試不同于其他傳統業務，觀念是允許經營范圍更廣；然而這種有限性的將取決于其他因素。例如內應力，因?yàn)槠涔ぷ鳡顟B(tài)可能在某些變性的pH值、電流密度和溫度下。在另一方面，傳統的硬度介于200-250高壓磺酸浴，遠低于在測試中獲得的。有必要要考慮到對于注塑模具，接受300高壓硬度。其中最常見的材料就可以找到注塑模具鋼(高壓290)，積分硬化鋼(高壓520-595)，casehardened鋼(高壓760-800)等。這樣可以觀察到中高幅度硬度水平的鎳殼注塑模具材料，有償殼牌是反對用低延性的環氧樹脂填充。因?yàn)樽⑺苁且粋€(gè)內壓控制進程， 這也是為什么必須要?dú)ず穸缺M可能均勻(以上最低值)，避免重大失誤。如圖： 圖2．硬度變化與電流密度．4+0.2pH值．45℃ 5．金相組織 主要是為了改良而分析金相結構、電流密度、溫度值。樣品分析、橫向部分(垂直于沉積)為實現準備便捷，樹脂被方便的封裝在含有硝酸，醋酸混合物的瓶子，進行每隔15，25，40，50秒收盤后擦拭。為了事后在奧林匹斯金相顯微鏡碲下觀察PME3-ADL 3.3×/10×。 在評論文中的照片之前，有必要討論用差分快速成型機械制造逐層貫通的熔融塑料 (ABS) 殼模具。 每一層擠出模具留下的螺紋直徑約0.15毫米即橫向和縱向的中間媒介。因此，在機器的主要表面可以觀察到薄線標明的道路。這些線路將作為參考解決水平鎳重復性顯示。重復性模式將是一個評估注塑模具基本內容的基本要素：表面紋理。 該系列測試表1所示： 表1． 檢驗系列 系列 pH 溫度(℃) 電流密度A/mm2 1 4.2?±?0.2 55 2.22 2 3.9?±?0.2 45 5.56 3 4.0?±?0.2 45 10.00 4 4.0?±?0.2 45 22.22 圖3顯示第一次蝕刻的系列表面樣本。它顯示了頻分多路復用機的原理，也就是說有一個良好的重復性。 它仍無法察覺圓形的顆粒結構，在圖4系列2之后的第二蝕刻可以觀察到一條線道較前明顯減少。在圖5系列2°和3，雖然這時路徑很難查出，蝕刻已開始出現了一批顆粒結構。另外，最黑暗的地方顯示含有合成物浴的蝕刻過程。 圖 3. 系列1(×150)、蝕刻1 圖 4. 系列2(×300), 蝕刻2 圖 5. 系列3(×300),蝕刻2 這一行為表明，工作在低電流密度、高溫下，殼以良好的再現能力獲得粒度即適當?shù)膽?yīng)用。如果進行了平面沉積的橫向分析，它可以在所有的樣品和一切條件下測試，沉淀物的增長結構是由薄片組成的(圖6)。雖然延展性低，但是取得了高機械阻力。這取決于質量,，首先存在添加劑。因?yàn)榛撬徭囋]有添加劑，通常制造纖維和非層結構[5]。更正直到近似于空值的潤濕劑，在任何情況下保持層結構表明這種結構的應力消脂(allbrite習得)。在另一方面，據測試根據不同層結構層厚度的計算電流密度。 圖 6. 機橫向系列2 (×600),蝕刻2. 6．內壓 其中一個主要特征是殼的應用像輸入低水平內壓。用陰極張力法在不同電流密度和鍍液溫度測量系統下做不同的測試。鋼鐵被用來測試與控制自由和固定(160毫米長度 寬度12.7毫米,厚度0.3毫米)。因?yàn)槌练e金屬是唯一允許檢測控制機械應變(拉伸或壓應力)和計算內壓。對于部分鋼鐵來說，從彈性的角度來看Stoney模型應用被假定鎳底層厚度不夠，表面影響小(3微米)。在所有測試情形中最佳條件是內部壓力50和極端條件下為2兆帕，為所需的可接受值。最后的結論是在不同的條件和工作參數下電鍍?cè)≡试S無明顯變化內壓。 7．測試的注塑模具 試驗已在各種代表性熱塑性材料中進行如聚丙烯、鎂、高密度聚乙烯和PC。分析零件的性能，如注射大小、重量、抗延性僵化。測試?yán)炝W(xué)性能和分析光破壞性。這一核心進行約500注射量，其余條件下經受更多。 一般而言，重大分歧都是未察覺樣本核心之間的行為。從加工腔到一整套的材料，但是在分析光彈性時(圖七)發現了兩種不同張標本，基本上是取決于炎熱劃轉、澆注腔的剛度。這種差異說明延性變化較突出的部分材料，如聚乙烯、六鎂。 圖 7．分析光注入標本 在所有分析化驗中發現高密度聚乙烯管案例是一個較低延性標本。所得鎳核心，量化30%左右。在這種情況下六鎂值也接近50%。 8．結論 經過連續的測試和不同的條件下已經清查磺酸鎳浴已獲準使用添加劑。鎳殼將獲得一些可以接受的注塑模具的機械性能。也就是說，重復性好，高硬度及良好的機械阻力。因而機械層結構不足的部分將取代鎳殼的環氧樹脂飾面。核心為注塑塑造，允許注入可接受質量水平中型系列塑料零件。 附件2：外文原文（復印件） A technical note on the characterization of electroformed nickel shells for their application to injection molds Abstract The techniques of rapid prototyping and rapid tooling have been widely developed during the last years. In this article, electroforming as a procedure to make cores for plastics injection molds is analysed. Shells are obtained from models manufactured through rapid prototyping using the FDM system. The main objective is to analyze the mechanical features of electroformed nickel shells, studying different aspects related to their metallographic structure, hardness, internal stresses and possible failures, by relating these features to the parameters of production of the shells with an electroforming equipment. Finally a core was tested in an injection mold. Keywords: Electroplating; Electroforming; Microstructure; Nickel Article Outline 1. Introduction 2. Manufacturing process of an injection mold 3. Obtaining an electroformed shell: the equipment 4. Obtained hardness 5. Metallographic structure 6. Internal stresses 7. Test of the injection mold 8. Conclusions 1. Introduction One of the most important challenges with which modern industry comes across is to offer the consumer better products with outstanding variety and time variability (new designs). For this reason, modern industry must be more and more competitive and it has to produce with acceptable costs. There is no doubt that combining the time variable and the quality variable is not easy because they frequently condition one another; the technological advances in the productive systems are going to permit that combination to be more efficient and feasible in a way that, for example, if it is observed the evolution of the systems and techniques of plastics injection, we arrive at the conclusion that, in fact, it takes less and less time to put a new product on the market and with higher levels of quality. The manufacturing technology of rapid tooling is, in this field, one of those technological advances that makes possible the improvements in the processes of designing and manufacturing injected parts. Rapid tooling techniques are basically composed of a collection of procedures that are going to allow us to obtain a mold of plastic parts, in small or medium series, in a short period of time and with acceptable accuracy levels. Their application is not only included in the field of making plastic injected pieces ， however, it is true that it is where they have developed more and where they find the highest output. This paper is included within a wider research line where it attempts to study, define, analyze, test and propose, at an industrial level, the possibility of creating cores for injection molds starting from obtaining electroformed nickel shells, taking as an initial model a prototype made in a FDM rapid prototyping equipment. It also would have to say beforehand that the electroforming technique is not something new because its applications in the industry are countless but this research work has tried to investigate to what extent and under which parameters the use of this technique in the production of rapid molds is technically feasible. All made in an accurate and systematized way of use and proposing a working method. 2. Manufacturing process of an injection mold The core is formed by a thin nickel shell that is obtained through the electroforming process, and that is filled with an epoxic resin with metallic charge during the integration in the core plate 。 This mold (Fig. 1) permits the direct manufacturing by injection of a type a multiple use specimen, as they are defined by the UNE-EN ISO 3167 standard. The purpose of this specimen is to determine the mechanical properties of a collection of materials representative industry, injected in these tools and its coMParison with the properties obtained by conventional tools. Fig. 1.?Manufactured injection mold with electroformed core. The stages to obtain a core, according to the methodology researched in this work, are the following: (a) Design in CAD system of the desired object. (b) Model manufacturing in a rapid prototyping equipment (FDM system). The material used will be an ABS plastic. (c) Manufacturing of a nickel electroformed shell starting from the previous model that has been coated with a conductive paint beforehand (it must have electrical conductivity). (d) Removal of the shell from the model. (e) Production of the core by filling the back of the shell with epoxy resin resistant to high temperatures and with the refrigerating ducts made with copper tubes. The injection mold had two cavities, one of them was the electroformed core and the other was directly machined in the moving platen. Thus, it was obtained, with the same tool and in the same process conditions, to inject simultaneously two specimens in cavities manufactured with different technologies. 3. Obtaining an electroformed shell: the equipment Electrodeposition is an electrochemical process in which a chemical change has its origin within an electrolyte when passing an electric current through it. The electrolytic bath is formed by metal salts with two submerged electrodes, an anode (nickel) and a cathode (model), through which it is made to pass an intensity coming from a DC current. When the current flows through the circuit, the metal ions present in the solution are transformed into atoms that are settled on the cathode creating a more or less uniform deposit layer. The plating bath used in this work is formed by nickel sulfamate and at a concentration of 400?ml/l, nickel chloride (10?g/l), boric acid (50?g/l), Allbrite SLA (30?cc/l) and Allbrite 703 (2?cc/l). The selection of this composition is mainly due to the type of application we intend, that is to say, injection molds, even when the injection is made with fibreglass. Nickel sulfamate allows us to obtain an acceptable level of internal stresses in the shell (the tests gave results, for different process conditions, not superior to 50?MPa and for optimum conditions around 2?MPa). Nevertheless, such level of internal pressure is also a consequence of using as an additive Allbrite SLA, which is a stress reducer constituted by derivatives of toluenesulfonamide and by formaldehyde in aqueous solution. Such additive also favours the increase of the resistance of the shell when permitting a smaller grain. Allbrite 703 is an aqueous solution of biodegradable surface-acting agents that has been utilized to reduce the risk of pitting. Nickel chloride, in spite of being harmful for the internal stresses, is added to enhance the conductivity of the solution and to favour the uniformity in the metallic distribution in the cathode. The boric acid acts as a pH buffer. Once the bath has been defined, the operative parameters that have been altered for testing different conditions of the process have been the current density (between 1 and 22?A/dm2), the temperature (between 35 and 55?°C) and the pH, partially modifying the bath composition. 4. Obtained hardness One of the most interesting conclusions obtained during the tests has been that the level of hardness of the different electroformed shells has remained at rather high and stable values. In Fig. 2, it can be observed the way in which for current density values between 2.5 and 22?A/dm2, the hardness values range from 540 and 580?HV, at pH 4?±?0.2 and with a temperature of 45?°C. If the pH of the bath is reduced at 3.5 and the temperature is 55?°C those values are above 520?HV and below 560?HV. This feature makes the tested bath different from other conventional ones composed by nickel sulfamate, allowing to operate with a wider range of values; nevertheless, such operativity will be limited depending on other factors, such as internal stress because its variability may condition the work at certain values of pH, current density or temperature. On the other hand, the hardness of a conventional sulfamate bath is between 200–250?HV, much lower than the one obtained in the tests. It is necessary to take into account that, for an injection mold, the hardness is acceptable starting from 300?HV. Among the most usual materials for injection molds it is possible to find steel for improvement (290?HV), steel for integral hardening (520–595?HV), casehardened steel (760–800?HV), etc., in such a way that it can be observed that the hardness levels of the nickel shells would be within the medium–high range of the materials for injection molds. The objection to the low ductility of the shell is compensated in such a way with the epoxy resin filling that would follow it because this is the one responsible for holding inwardly the pressure charges of the processes of plastics injection; this is the reason why it is necessary for the shell to have a thickness as homogeneous as possible (above a minimum value) and with absence of important failures such as pitting. Fig. 2.?Hardness variation with current density. pH 4?±?0.2, T?=?45?°C. 5. Metallographic structure In order to analyze the metallographic structure, the values of current density and temperature were mainly modified. The samples were analyzed in frontal section and in transversal section (perpendicular to the deposition). For achieving a convenient preparation, they were conveniently encapsulated in resin, polished and etched in different stages with a mixture of acetic acid and nitric acid. The etches are carried out at intervals of 15, 25, 40 and 50?s, after being polished again, in order to be observed afterwards in a metallographic microscope Olympus PME3-ADL 3.3×/10×. Before going on to comment the photographs shown in this article, it is necessary to say that the models used to manufacture the shells were made in a FDM rapid prototyping machine where the molten plastic material (ABS), that later solidifies, is settled layer by layer. In each layer, the extruder die leaves a thread approximately 0.15?mm in diameter which is compacted horizontal and vertically with the thread settled inmediately after. Thus, in the surface it can be observed thin lines that indicate the roads followed by the head of the machine. These lines are going to act as a reference to indicate the reproducibility level of the nickel settled. The reproducibility of the model is going to be a fundamental element to evaluate a basic aspect of injection molds: the surface texture. The tested series are indicated in Table 1. Table 1. Tested series Series pH Temperature (°C) Current density (A/dm2) 1 4.2?±?0.2 55 2.22 2 3.9?±?0.2 45 5.56 3 4.0?±?0.2 45 10.00 4 4.0?±?0.2 45 22.22 Fig. 3 illustrates the surface of a sample of the series after the first etch. It shows the roads originated by the FDM machine, that is to say that there is a good reproducibility. It cannot be still noticed the rounded grain structure. In Fig. 4, series 2, after a second etch, it can be observed a line of the road in a way less clear than in the previous case. In Fig. 5, series 3 and 2° etch it begins to appear the rounded grain structure although it is very difficult to check the roads at this time. Besides, the most darkened areas indicate the presence of pitting by inadequate conditions of process and bath composition. Fig. 3.?Series 1 (×150), etch 1. Fig. 4.?Series 2 (×300), etch 2. Fig. 5.?Series 3 (×300), etch 2. This behavior indicates that, working at a low current density and a high temperature, shells with a good reproducibility of the model and with a small grain size are obtained, that is, adequate for the required application. If the analysis is carried out in a plane transversal to the deposition, it can be tested in all the samples and for all the conditions that the growth structure of the deposit is laminar (Fig. 6), what is very satisfactory to obtain a high mechanical resistance although at the expense of a low ductibility. This quality is due, above all, to the presence of the additives used because a nickel sulfamate bath without additives normally creates a fibrous and non-laminar structure. The modification until a nearly null value of the wetting agent gave as a result that the laminar structure was maintained in any case, that matter demonstrated that the determinant for such structure was the stress reducer (Allbrite SLA). On the other hand, it was also tested that the laminar structure varies according to the thickness of the layer in terms of the current density. Fig. 6.?Plane transversal of series 2 (×600), etch 2. 6. Internal stresses One of the main characteristic that a shell should have for its application like an insert is to have a low level of internal stresses. Different tests at different bath temperatures and current densities were done and a measure system rested on cathode flexural tensiometer method was used. A steel testing control was used with a side fixed and the other free (160?mm length, 12.7?mm width and thickness 0.3?mm). Because the metallic deposition is only in one side the testing control has a mechanical strain (tensile or compressive stress) that allows to calculate the internal stresses. Stoney model was applied and was supposed that nickel substratum thickness is enough small (3?μm) to influence, in an elastic point of view, to the strained steel part. In all the tested cases the most value of internal stress was under 50?MPa for extreme conditions and 2?MPa for optimal conditions, an acceptable value for the required application. The conclusion is that the electrolitic bath allows to work at different conditions and parameters without a significant variation of internal stresses. 7. Test of the injection mold Tests have been carried out with various representative thermoplastic materials such as PP, PA, HDPE and PC, and it has been analysed the properties of the injected parts such as dimensions, weight, resistance, rigidity and ductility. Mechanical properties were tested by tensile destructive tests and analysis by photoelasticity. About 500 injections were carried out on this core, remaining under conditions of withstanding many more. In general terms, important differences were not noticed between the behavior of the specimens obtained in the core and the ones from the machined cavity, for the set of the analysed materials. However in the analysis by photoelasticiy (Fig. 7) it was noticed a different tensional state between both types of specimens, basically due to differences in the heat transference and rigidity of the respective mold cavities. This difference explains the ductility variations more outstanding in the partially crystalline materials such as HDPE and PA 6. Fig. 7.?Analysis by photoelasticity of injected specimens. For the case of HDPE in all the analysed tested tubes it was noticed a lower ductility in the specimens obtained in the nickel core, quantified about 30%. In the case of PA 6 this value was around 50%. 8. Conclusions After consecutive tests and in different conditions it has been checked that the nickel sulfamate bath, with the utilized additives has allowed to obtain nickel shells with some mechanical properties acceptable for the required application, injection molds, that is to say, good reproducibility, high level of hardness and good mechanical resistance in terms of the resultant laminar structure. The mechanical deficiencies of the nickel shell will be partially replaced by the epoxy resin that finishes shaping the core for the injection mold, allowing to inject medium series of plastic parts with acceptable quality