購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
集成式發動機輔助混合動力系統
摘要
本論文介紹了用于設計和開發Honda Insight發動機的技術方法，一種新的發動機輔助混合動力汽車，其總開發目標是在廣泛的行駛條件下達到當今Civic消耗量的一半，實現35km/L（日本10-15模式），3.4L/km（98/69/EC）的消耗量。為了達到這個目標，加入了許多用于包裝和集成發動機輔助系統以及改善發動機效率的新技術，開發了一種新的集成式發動機輔助混合動力發動機系統。這是結合了一種低空氣阻力的新型輕稆車身開發的。環境性能目標也包括了低排放（日本2000年標準的一半，EU2000標準的一半），高效率和楊回收性。對消費的關鍵特性全面考慮，包括碰撞安全性能，操縱性和運行特性。
1． 緒論
為減小汽車對社會和環境的沖擊要求其更干凈并且能量效率更高更節能，空氣質量更好。降低CO2排放問題作為全球環境焦點提出，解決這些問題的方法之一就是混合動力汽車。Honda已開發并向遍及全球的幾大市場輸入Insight，新一代車輛設計。?Insight將混合動力系與先進的車身技術特性相結合以符合取得實際的最高燃油經濟性的總目標。
混合動力系是發動機的輔助并聯平行結構，把IMA叫做集成式發動機輔助。此動力系將把一個高效電動機與一個新型小排量VTEC發動機結合起來，很輕的鋁車身，改良的空氣動力學以實現3.4L/100km(CO2：80g/km)98/69/EC燃油經濟性。低排放性能也已達到EU排放水平為目標。
除減速能的重用之外，集成式發動機在典型的市區行駛加速時提供大助力扭矩，顯著地減小了發動機拜師，提高了發動機效率。接近56kW每噸的功率/質量比保證了穩定的爬坡能力和高速的常速行駛能力。新發動機技術包括促進高效快速的催化劑活性化的一種新VTEC（電子控制可變配氣相位和氣門升程）缸蓋設計，促進稀薄燃燒能降低排放的新型稀NOx催化轉化器，廣泛的減摩及減重特色也用于其中。
2． 開發目標及開發理念
開發目的在于達到極低燃油消耗量。我們定下的目標是當今產品Civic燃油經濟性的兩倍，Honda的典型高燃油經濟性轎車——7.0L/100km(93/116/EC)，因而Insight在世界汽油機轎車中擁有最低的燃油消耗量。排放性能由于低燃油消耗量的緣故而趨于犧牲，但是，我們仍決定配備其它大多數批量生產的汽車所具備的低排放性能，在回收性（另一重要環境問題），碰撞安全性能以及操縱性和造型等汽車的基本性能方面也有考慮。綜上所述，我們的開發目標如下：
世界最好燃油消耗性能
超低排放
超回收性
全世界最高碰撞安全性能水平
先進造型
實用特色和操縱靈敏性
舒適的帶有個性使用空間的二座結構
3． 降低燃油消耗量的策略
為了建立起取得低燃油消耗目標的技術途徑，我們對一輛裝配1.5L發動機聽Civic基型車輛能量消耗進行細節分析。為取得低燃油消耗和其它上述目的，我們發現將目標效率如圖形1所示粗略地分為三部分是十分有用的。劃分如下：
發動機自身熱效率的改善
混合動力裝置制動能量再生和怠速止擋應用
降低重復和減小空氣阻力和滾動阻力的車身技術
圖1. 兩倍于CIVIC燃油經濟性的目標
我們開發這種新集成式發動機輔助動力系瞄準為21世紀汽車動力系建立一個基準。這種動力系適合于下一代汽車，同時達到了極低3.4L/100km極低的燃油消耗量和低廢氣排放性能。本篇論文對新開發的IMA系統作了報告，包括用于Honda Insight的稀燃發動機，電動機功率控制單元，蓄電池技術和廢氣排放控制技術。
4． IMA系統的目的
為達到目的世界最低燃油消耗量，在開發下一代IMA 混合動力系統時我們盡可能多地結合已取得的技術方法。為達到這個目標，建立了以下四個系統開發主題：
減速能量的再生
發動機效率的改善
怠速止擋系統運用
動力系尺寸、重量的減小
5． 1系統結構
圖2. IMA 系統
圖 3IMA系統的發動機速度 (rpm)/輸出特性曲線
如圖2所示，IMA系統以發動機作為主動力源，加速時用電動機作為輔助動力源。用電動機作為輔助動力源簡化了整個系統并可采用輕型緊湊的發動機，蓄電池和功率控制單元（PCU）。
在發動機與變速器間布置了一個永磁直流無電刷電動機，減速時為每個傳動裝置計算出減速比，PCU控制發電機發電（再生能量）對鎳金屬氫蓄電池充電，加速時由油門開度，發動機參數，蓄電池充電狀態計算出輔助動力提供量（此后稱輔助），PCU控制蓄電池流向驅動馬達的電流量。
5. 2再生減速能量
通過回收再生減速能量可在加速時補充發動機輸出并減小油耗量。減小包括發動機摩擦損失在內的工作能量損失引起的阻力可增加可用的再生能，尤其是使發動機拜師減少到最小是減小摩擦的有效措施。降低發動機排量還有其它好處，例如減輕重量增加熱效率。IMA系統通過優化發動機和變速箱參數有效地增加了減速時的再生能量。
5．3減小發動機排量
改善混合動力系燃油經濟性中減小發動機排量是一個十分重要的因素。但是現代汽車須在廣泛的動態范圍內運行，減小排量就等于降低汽車的基本性能特征。如圖3所示的輸出特性曲線，利用電動機的大轉矩性能特征IMA系統在低速范圍內輔助發動機。電動機在低轉速時能將總轉矩提高50%，IMA系統取得了快速重啟和不可思議的平滑啟動成果。高轉速范圍時用電子控制可變配氣相位和氣門升程發動機提高輸出。因此保證了足夠的峰值功率，便可用一個新的1.0L小排量發動機。
5．4稀燃發動機運行
基于節氣門開度，以電動機輔助，創造出十分線性的轉矩特性，由此改善了操縱靈活性。除此之外，電動機輔助在中載條件下可擴大稀燃運行范圍，顯出了新開發稀烯發動機的潛力。
5．5怠速止推系統
制動時停止發動機而不是怠速空轉也是減小消耗量的有效措施。如圖4所示，為了以最小消耗量重啟發動機，發動機須在打火前通過集成式發動機快速轉到600rpm或更高的的轉速。加上發動機停止運行空轉省油，可以使消耗量最小。在執行怠速止擋時須注意許多問題，包括判斷駕駛者停車趨向，重啟準備，提供減速平滑感，發動機停止時最小化車身振動。
Figure 4.Time (sec) The number of cranking in the engine start
圖4 起動電機的轉矩
5． 電動機輔助機構
6． 1開發目標
通過限速IMA電動機功能在阻力和再生兩方面，確立的開發主題以取得以下兩點：
簡單緊湊結構
系統重量不大于整車質量的10%
6．2直流無電刷電動機
薄且緊湊的直流無電刷電動機具有發動機輔助和能源再生功能安裝在曲軸上（圖5），加速時輔助電動機是減小消耗量的十分有效的措施。這是一種高效、緊湊、輕型、永磁型三相同步電動機，最大輸出功率為10kW。除了開發技術以減輕重量、提高效率之外，我們也盡可能把電動機做得最薄以獲得緊湊的動力系。熔模鑄造法用于轉子，靠安裝在曲軸上的彎曲而旋轉。與正常鑄造產品相比取得了高強度更輕的重量。轉子磁鐵方面，對HONDA EV PLUS的燒結釹磁鐵作了進一步的改良，扭轉強度提高了近90%，熱阻也得到改良。這種設計也使電動機無需冷卻系統。發明了一種有凸極集中繞組的可拆式定子結構并用于減小電動機的軸向寬度。比傳統波形繞法，如圖6所示。除此之外，從銅極引出的集中配電母線卡環可用于向定子兩端線圈供電的線束固定，這使結構變得極簡單緊湊。這些改良得到了一個厚度僅60mm的極薄電動機，與傳統技術相比在厚度減小了40%。
圖5 電機剖面圖
Wave winding Salient pole winding
圖6 繞阻比較
圖7 電機的剖視圖
6．3鎳金屬氫蓄電池
鎳金屬氫蓄電池用于存儲和為電動機輔助提供電力。這是一種先進的蓄電池，它安裝于HONDA EV PLUS電動汽車上，已經在高能蓄電池中取得了成就。這種混合動力汽車蓄電池以穩定輸出為特色，而不管蓄電池充電狀態如何，且在應用中十分耐用。蓄電池是20個模塊的集成結構，每個模塊包括以網格狀串聯的6個D型單電池，這120個1.2V的單電池全部以串聯方式聯結形成了總電池容量為144V的容量。
6．4功率控制單元（PCU）
PCU精確控制電動機輔助/再生并向12V動力源提供動力，它具備內置冷卻功能。這就使其有一輕型，有效緊湊的結構。使用高效率冷卻肋片和鎂冷卻套集成的購銷風冷系統使重量顯著減輕。驅動馬達的變壓器是PCU內部最重要的元件，將開關元件集成為鄭重三相交流的單獨模塊，而在EV PLUS上都是分立的。驅動電路最小分并以高密度集成為IC。這些改良不僅使重量顯著減輕，也改變了功率轉化效率，更好的是，采用高效相控驅動電動機降低了發熱量，使其可以用輕型簡單的風冷系統。
Figure 8.Inverter Cut view of PCU Heat Sink case
圖8
7發動機
7．1開發目標
為了在廣泛的工況下獲得低油耗以下四點作為開發主題：
熱效率改善
減小機械損失（與傳統設計相比小10%）
減小尺寸和降低重量（同類產品中最輕）
EU2000標準的一半
7．2發動機總觀及其規格
發動機規格如表格1所示，其主要新特色和他們的目的如表格2所示。首先，配備IMA系統的汽車以接近1000cm3的排量為最佳，因此選擇了3缸發動機以使燃燒室的面容比最小，并減小機械損失。
7．3油耗
由于在低轉速時電動機輔助加強和VTEC發動機充足的峰值輸出功率使得在電動機輔助動力系中可以大大地減小發動機排量。這款發動機的一個重要特色是通過稀燃技術而有顯著的改善的燃燒率。采用了包括進氣渦流口新氣缸內強化渦流技術以達到這點，通過改良指示效率而獲得的緊湊燃燒室和高壓縮比對其也有幫助。這導致了與傳統稀燃發動機相比更短的燃燒時間，在更高的空燃比下使其在更稀的范圍內燃燒，顯著地降低了油耗。這種強渦進氣口和緊湊的燃燒室結果是在傳統VTEC稀燃技術上的革新。傳統VTEC發動機中，渦流是靠在低速工況下關閉一個進氣閥門產生的，然而在新發動機中進氣閥和進氣口被排式豎直結構以在可燃物流向氣缸時產生強渦流。
傳統VTEC結構中進排氣搖臂各由獨立的搖臂軸支撐，如圖10所示，新VTEC機構將其合成一根單獨的搖臂軸，顯著地減小了尺寸，還將氣門角從460減小為300，容許強旋渦形氣門及更緊湊的燃燒室。
圖9 發動機的側視圖
圖10 氣缸的剖面圖
7．4減小機械損失
除了改良指示熱效率，減小機械損失對改善燃油經濟性也很重要，為了達到這個目標，采用了以下低磨擦技術：
同軸滾子VTEC機構
活塞微波紋處理
偏置氣缸結構
低張力活塞環
連桿滲碳
同軸滾子VTEC結構Honda S2000（大功率跑車發動機）技術向單凸輪軸VTEC機構的改進。通過凸輪軸上的搖臂滑動區域使用滾針軸承可將凸輪軸驅動機構損失減小70%。另外，將VTEC開關活塞加入滾針軸承內軸同時減小了尺寸與重量。
圖11 VTEC滾子剖面圖
活塞微波紋處理由創造微波表面的活塞裙部處理組成，它提高了油膜抑制性能，使用低摩擦損失機油時將減小近30%的摩擦，這些功效開發了 標準相符的0W-20級低粘度油，其摩擦減小效用是發動機馬達試驗測量的，測試結果如圖12所示。現今發動機技術中，HTTS處于極限摩擦值進精度為7.5Mpa，同先進低摩擦發動機結合應用，極限值比當今的發動機低得多。如圖13所示，低摩擦技術大大地減小了發動機的總摩擦力?？偟膩碚f，與傳統1.0L發動機相比降低了10%以上。
圖12 摩擦減小中的極限
圖13 發動機摩擦
7．5減小重量
總觀了發動機中幾乎所有零件結構和材料，帶著創造世界1.0L產品中最輕的發動機目的，減輕重量甚至延伸到了骨架式結構技術和材料技術領域，如用于S2000的連桿滲碳。表面強化處理大大加快了發動機的營運速度，我們以此為IMA發動機制造出更細的連桿，與傳統連桿相比重量減輕了近30%。
圖14 磁性油底殼
大多數油底殼是用鋼板或鋁合金制造，傳統的鎂材料已經有高溫機油承受能力的問題，與傳統材料相比，能在1200C以上溫度承受顯著落差的蠕變強度，我們開發的新型鋁制的底殼（圖14）能承受高達1500C的蠕變強度。油底殼用有鋁制墊片的鋼制螺栓固定以防止電蝕。此油底殼經鋁制的輕35%，在重量的減輕是與兩金屬比質量相比的 為進一步擴大塑制零件的應用，塑制材料在進氣歧管、缸罩、水泵、皮帶輪等進氣系統零件中得到采用，這些變化使發動機自重小于60kg是世界1.0L產品中最小的。
7．6廢氣排放性能
本發動機采用能同時達到稀燃和低排放的技術，顯著地降低了NOx排量，排氣系統發動機后置改善服燃燒（圖15）。除此之外，將排氣歧管集成在缸蓋上，新開發了一種能在稀燃工況時吸收NOx的催化劑，能降低NOx排放。
Figure 15. Section view of emission system
圖15 排放系統的剖面圖
7．6．1集成排氣歧管和缸蓋
傳統缸蓋每個氣缸獨立的排氣門，在缸蓋上再安裝一排氣歧管將這些排氣門合起來。如圖16所示，Insight缸蓋有內置的排氣門合并的結構，大大地減輕了重量。小小的熱輻射表面減小了廢氣熱損失，使催化過程更早進行。
圖16 氣缸蓋主視圖
7．6．2稀NOX催化劑
Insight催化系統包含了NOX吸附材料的三元催化轉化器，如圖17所示。
Figure 17. Exhaust gas purification mechanism
圖17 廢氣凈化裝置
在稀燃工況下，廢氣中的NOX被催化劑吸附。傳統三元催化在稀燃工況下，能小量降低NOX，把大部分HC、CO氧化成CO2和H2O。由于廢氣中有大量的氧，所以相對少地降低NOX，大部分NOX都存儲于吸附材料表面。在理論空燃比和更高時，廢氣被阻擋，利用HC和CO作為還原劑將吸附的NOX還原為氮，同時吸附過程也在進行。因此，利用有NOX吸附作用的三元催化器可有效地降低NOX、HC和CO。此催化劑在稀燃和理論配比工期況下表現出良好的轉化性能，在NOX吸附量滿載前有必要再生大氣。稀燃時催化劑直接吸收NOX，在理論配比時將NOX還原為無害的氮排出，此催化劑以稀燃工況直接吸附NOX于表面為特征，而不是作為化合物吸附于表面內，方便了減小轉化，提供了更高的高溫承受能力。此催化器將稀燃工況下的NOX排量降低了傳統的1/10。值得一提的是其吸附轉化性能對燃料中硫含量十分敏感，因為硫會與NOX爭奪吸附空間。傳統催化器在稀燃運行時基本沒有降低NOX排量，因此需減小稀燃范圍以降低NOX排量。此催化劑確保了稀燃工況下改善燃油經濟性，達到了EU2000標準，是遵守世界排放標準的高效稀燃發動機。
7． 結論
本論文總觀了新開發電動機輔助混合動力系，對其各元件及效率與排放性能作了描述。此動力系同時滿足了極低油耗和低排放，達到了輕型緊湊的質量，我們相信此系統能推動21世紀的汽車技術。
Development of Integrated Motor Assist Hybrid System:
Development of the ‘Insight’, a Personal Hybrid Coupe
Kaoru Aoki, Shigetaka Kuroda, Shigemasa Kajiwara,
Hiromitsu Sato and Yoshio Yamamoto
Honda R&D Co.,Ltd.
Copyright ?2000 Society of Automotive Engineers, Inc.
ABSTRACT
This paper presents the technical approach used to design and develop the powerplant for the Honda Insight, a new motor assist hybrid vehicle with an overall development objective of just half the fuel consumption of the current Civic over a wide range of driving conditions. Fuel consumption of 35km/L (Japanese 10-15 mode), and 3.4L/100km (98/69/EC) was realized. To achieve this, a new Integrated Motor Assist (IMA) hybrid power plant system was developed, incorporating many new technologies for packaging and integrating the motor assist system and for improving engine thermal efficiency. This was developed in combination with a new lightweight aluminum body with low aerodynamic resistance. Environmental performance goals also included the simultaneous achievement of low emissions (half the Japanese year 2000 standards, and half the EU2000 standards), high efficiency, and recyclability. Full consideration was also given to key consumer attributes, including crash safety performance, handling, and driving performance.
1. INTRODUCTION
To reduce the automobile’s impact on society and the environment requires that it be increasingly cleaner and more energy efficient. The issues of energy conservation, ambient air quality, and reduction in CO2 emissions are increasing raised as global environmental concerns. One solution for dealing with these issues is the hybrid automobile. Honda has developed and introduced to several major markets worldwide the Insight, a new generation of vehicle design. The Insight combines a hybrid power train with advanced body technology features to meet an overall goal of achieving the highest fuel economy practical.
The hybrid power train is a motor assist parallel configuration, termed IMA for ‘Integrated Motor Assist’. This power train combines a highly efficient electric motor with a new small displacement VTEC engine, a lightweight aluminum body, and improved aerodynamics to realize 3.4L/100km (CO2:80g/km) on 98/69/EC fuel economy. Low emissions performance was also targeted with emission levels achieving the EU2000.
In addition to recapturing deceleration energy, the integrated motor provides high torque assist during typical urban driving accelerations. This allows a significant reduction in engine displacement and higher engine efficiency. Sustained hill climbing performance and high speed cruising capability are assured by a power-toweight ratio of approximately 56kW per metric ton. New engine technology includes the application of a new VTEC (Variable valve Timing and valve lift, Electronic Control) cylinder head design promoting high efficiency and fast catalyst activation, and a new lean NOx catalyst system which promotes lean burn combustion and a reduction in emissions. Extensive friction and weight reducing features are also applied.
2. DEVELOPMENT TARGETS AND CONCEPT
Development was aimed at the achievement of extremely low fuel consumption. We set a target of twice the fuel economy of the current production Civic, Honda’s representative high fuel economy car at 7.0 L/100km (93/116/ EC). As a result, the Insight has the lowest fuel consumption in the world, among gasoline passenger cars.
Exhaust emission performance often tends to be sacrificed for the sake of low fuel consumption. However, we also decided to match the low emissions performance achieved by other mass production cars. Consideration was also given to recyclability (another important environmental issue), crash safety performance, and the basic car characteristics including handling and styling.
Summarizing the above, our development targets were as follows:
· The best fuel consumption performance in the world
· Ultra-low exhaust emissions
· Superior recyclability
· The world's highest level of crash safety performance
· Advanced styling
· Practical features and responsive handling
· Comfortable two-seat configuration with personal utility space
3. POLICIES FOR FUEL CONSUMPTION REDUCTION
In order to establish the technical approach for achieving the fuel consumption target, we conducted a detailed analysis of the energy consumption of the base car, a Civic equipped with a 1.5 liter engine. We found that it was useful to divide the targeted efficiency gains roughly into thirds, as shown in Fig. 1, in order to achieve the low fuel consumption and numerous other above-mentioned goals. These divisions are as follows.
· Improvement of the heat efficiency of the engine itself
· Recovery of braking energy and employment of idle stop using a hybrid power plant
· Car body technologies including reduction of weight and reduced aerodynamic and rolling resistance.
Figure 1. Target of double the fuel economy of CIVIC
Aiming to establish a benchmark for 21st century automobile power trains, we developed this new Integrated Motor Assist power train. This power train simultaneously achieves both extremely low fuel consumption of 3.4L/100km, and low exhaust gas emission performance, befitting a next-generation car.
This paper reports on the newly developed IMA system, including the lean burn engine, electric motor, power control unit, battery technology, and exhaust emission control technology used in the "Honda Insight".
4. AIM OF THE IMA SYSTEM
While developing this next-generation IMA hybrid system, we incorporated as many currently achievable technologies and techniques as possible, in order to achieve the "world's lowest fuel consumption".
The following four system development themes were established in order to meet this target.
1. Recovery of deceleration energy
2. Improvement of the efficiency of the engine
3. Use of idle stop system
4. Reduction of power train size and weight
5. OVERVIEW OF THE IMA SYSTEM
5.1. SYSTEM CONFIGURATION – As shown in Fig. 2, the IMA system uses the engine as the main power source and an electric motor as an auxiliary power source when accelerating. Using a motor as an auxiliary power source simplifies the overall system and makes it possible to use a compact and lightweight motor, battery, and power control unit (PCU).
Figure 2. IMA System
A permanent magnet DC brushless motor is located between the engine and the transmission. When decelerating, the rate of deceleration is calculated for each gear and the PCU controls the motor to generate electricity (recover energy), which charges a nickel-metal hydride battery. When accelerating, the amount of auxiliary power provided (hereafter called "assist") is calculated from the throttle opening, engine parameters, and battery state of charge. The PCU controls the amount of current flowing from the battery to the drive motor
5.2. RECOVERY OF DECELERATION ENERGY – Recovering deceleration energy through regeneration makes it possible to supplement the engine’s output during acceleration and reduce the amount of fuel consumed. Reducing resistance due to running losses, including engine frictional losses, increases the available energy for regeneration. In particular, minimizing the engine displacement is an effective means of reducing friction. Engine displacement reduction also has several other benefits, such as weight reduction and increased thermal efficiency. The IMA system effectively increases the amount of regeneration during deceleration by optimizing the engine and transmission specifications.
5.3. REDUCTION OF ENGINE DISPLACEMENT – Reducing engine displacement is a very important factor in improving fuel economy of a hybrid drive train. However, modern automobiles have to perform over a wide dynamic range. Reducing the displacement is equivalent to lowering the basic performance characteristics of the car. As shown in the output characteristics graph in Fig. 3, the IMA system assists the engine in the low rpm range by utilizing the hightorque performance characteristic of electric motors. The motor can increase overall toruque by over 50% in the lower rpm range used in normal driving. Output in the high rpm range is increased by using a Variable valve Timing and valve lift Electronic Control (VTEC) engine. Thus sufficient peak power is assured and makes it possible to use a new, small displacement 1.0 liter engine.
Figure 3.Engine speed (rpm) Output performance of IMA SYSTEM
Assist from the electric motor while accelerating is a very efficient means of reducing the amount of fuel consumed.
5.4. ACHIEVING LEAN BURN ENGINE OPERATION – Assist from the electric motor, based upon the throttle opening, creates quite linear torque characteristics. This, in turn, improves driveability. In addition, motor assist is also provided under moderate load conditions to broaden the lean-burn operating range, bringing out the full potential of the newly developed lean burn engine.
5.5. IDLE STOP SYSTEM – Stopping the engine rather than idling at stops is also an effective means for reducing fuel consumption. In order to restart the engine with the minimum amount of fuel consumption, the engine is quickly cranked to 600 rpm or more by the hightorque integrated motor before ignition occurs, as shown in Fig. 4. This makes it possible to minimize the amount of fuel consumed, in addition to the fuel saved by not running the engine at idle.
There are many issues to be considered when performing idle stop. These include judging the driver's intent to stop, preparing for the restart, providing a smooth feeling of deceleration, and minimizing vibration of the car body when the engine stops.
Figure 4.Time (sec) The number of cranking in the engine start
This IMA system results in the achievement of both very quick restarts and exceptionally smooth starts.
6. MOTOR ASSIST MECHANISM
6.1. DEVELOPMENT OBJECTIVES – By limiting the IMA motor functions to assistance and regeneration, development themes were established to achieve the following two points.
1. A simple and compact structure
2. A system weight of 10% (80 kg) or less of the completed car weight
6.2. THIN PROFILE DC BRUSHLESS MOTOR – A thin and compact DC brushless motor with engine assist and energy regeneration functions was coupled to the engine crank-shaft (Fig. 5).
Figure 5. Section view of Motor
This is a high efficiency, compact, and lightweight permanent magnet-type three-phase synchronous electric motor with a maximum output of 10 kW. In addition to developing technologies to reduce the weight and increase efficiency, we also aimed to make the motor as thin as possible in order to achieve a compact power train. Lost wax precision casting process was used for the rotor, rotating by bending coupled to the crankshaft. This achieves high strength and lighter weight (approximately -20%) compared with normal cast products. For the rotor magnets, further improvements were made to the neodymium-sintered magnets used in the HONDA EV PLUS, realizing approximately 8% greater torque density and improved heat resistance. This design also results in a motor structure that does not require a cooling system. A split stator structure with salient pole centralized windings was developed and used to reduce the motor axial width. A split stator was adopted to drive the rotor. This makes it possible to use the salient pole centralized windings, which are both more compact and efficient than the conventional coil wave winding method, as shown in Fig. 6. In addition, centralized distribution bus rings (Fig. 7) formed from copper sheets were used for the harness that supplies electricity to the coils on both sides of the stator. This results in an extremely compact and simple structure. These improvements achieve an extremely thin motor with a width of only 60 mm. This represents a 40% reduction in width compared to conventional technology.
Wave winding Salient pole winding
Figure 6. Compare of winding
Figure 7. Cut view of Motor
6.3. NICKEL-METAL HYDRIDE (NI-MH) BATTERY – A nickel-metal hydride battery is used to store and provide electrical energy for the motor assist. This is an advanced battery which has already achieved proven results in the high specific energy version used for the HONDA EV PLUS electric vehicle. The hybrid vehicle battery features stable output characteristics, regardless of the state-of-charge status. It is also extremely durable in this application. The battery pack has an integrated structure consisting of 20 modules, each having six
D-size cells connected in series, arranged in a lattice formation. These 120 1.2 V cells are all connected in series for a total battery pack voltage of 144 V.
6.4. POWER CONTROL UNIT (PCU) – The PCU performs precise control of motor assist/regeneration and supplies power to the 12 V power source. It has built-in cooling functions, which give it a lightweight, efficient and compact structure. Significant weight reduction was achieved by integrating an air cooling system using highly efficient cooling fins and a magnesium heat sink case.
The inverter for the drive motor, which is the most important component within the PCU, has switching elements integrated into a single module for generating the three-phase AC current. These were separate components on the EV PLUS. The drive circuit has been miniaturized and converted to an IC using high density integration. These improvements have resulted not only in significant weight reduction, but have also improved the power conversion efficiency. Further,